1. المقدمة
This manual provides detailed instructions for the safe and effective operation of your Sealey BT2014 Digital Battery and Alternator Tester with Printer. This device is designed for diagnosing battery and alternator faults, offering the convenience of printing test results directly. It is capable of testing battery condition with as little as 1.5V residual charge and analyzing the vehicle's charging system both at rest and under load.
يرجى قراءة هذا الدليل جيدًا قبل الاستخدام والاحتفاظ به للرجوع إليه في المستقبل.
2. معلومات السلامة
Always observe the following safety precautions to prevent personal injury and damage to the tester or vehicle.
- Wear appropriate eye protection and protective clothing when working near vehicle batteries.
- Ensure the vehicle is in a well-ventilated area to disperse any battery gases.
- أبقِ الشرر واللهب ومواد التدخين بعيدة عن البطارية.
- Avoid touching battery terminals or cables with bare hands.
- لا تقم بتشغيل جهاز الاختبار إذا بدا تالفًا.
- Ensure correct polarity when connecting the tester to the battery (red clamp إلى إيجابي ، أسود clamp (إلى سلبي).
- Keep the tester dry and clean.
3. محتويات العبوة
Upon opening your Sealey BT2014 package, please verify that all components are present and undamaged:
- Sealey BT2014 Digital Battery and Alternator Tester with integrated printer.
- Heavy-duty carry-case.
- Batteries (pre-installed or included for printer operation).
- Two rolls of printing paper.
- دليل التعليمات (هذه الوثيقة).
الشكل 3.1: The Sealey BT2014 Digital Battery and Alternator Tester shown within its protective carry case, with all accessories visible.
4. انتهى المنتجview
The Sealey BT2014 is a robust diagnostic tool designed for automotive electrical system analysis. It features a clear digital display, intuitive controls, and an integrated thermal printer for immediate result documentation.
الشكل 4.1: أمام view of the Sealey BT2014 tester, displaying the screen, control buttons, and attached battery clamps.
4.1. المكونات
- عرض رقمي: يعرض نتائج الاختبار وخيارات القائمة.
- أزرار التحكم: 'Forward', 'Back', 'Enter', 'Start/Stop' for navigation and operation.
- Integrated Printer: For printing test reports.
- بطارية Clamps: الأحمر للإيجاب (+)، والأسود للسالب (-).
- Printer Paper Compartment: Located under the clear cover.
الشكل 4.2: تفصيلية view of the Sealey BT2014 tester, highlighting the digital display and a printed test report emerging from the integrated printer.
5. الإعداد
5.1. تحميل ورق الطابعة
- Gently open the clear cover of the printer compartment.
- Insert a new roll of thermal paper, ensuring the paper feeds from the bottom of the roll.
- Pull a small length of paper out and close the cover, ensuring the paper exits through the slot.
5.2. Connecting to the Vehicle Battery
- Ensure the vehicle ignition is off and all accessories are disconnected.
- قم بتوصيل أحمر موجب (+) clamp إلى محطة البطارية الإيجابية.
- قم بتوصيل أسود سالبة (-) clamp إلى طرف البطارية السالب.
- Ensure connections are secure and free from corrosion. The tester will power on automatically.
6. تعليمات التشغيل
The BT2014 offers various testing modes accessible via the main menu.
6.1. اختبار البطارية
This function assesses the health and charge level of the vehicle's battery.
- From the main menu, select 'Battery Test' using the 'Forward'/'Back' buttons and press 'Enter'.
- Follow the on-screen prompts to input battery type (e.g., Flooded, AGM, Gel) and Cold Cranking Amps (CCA) rating. This information is usually found on the battery label.
- The tester will perform the analysis. Once complete, the results will be displayed, showing voltage, CCA, state of health, and state of charge.
- You will be prompted to 'Print Result?'. Select 'Yes' or 'No' and press 'Enter'.
الشكل 6.1: The Sealey BT2014 tester actively performing a test on a vehicle battery, with the display showing a prompt to print results.
6.2. Alternator Test (Charging System Test)
This function evaluates the vehicle's charging system, including the alternator's performance.
- From the main menu, select 'Alternator Test' and press 'Enter'.
- The tester will guide you through a series of steps, which typically include:
- Starting the vehicle engine.
- Running the engine at idle.
- increasing engine RPM to a specified level (e.g., 2000 RPM).
- Turning on electrical loads (e.g., headlights, fan).
- The tester will analyze the voltage output under various conditions.
- Results will be displayed, indicating the alternator's condition (e.g., 'Good', 'Low Output', 'High Output').
- You will be prompted to 'Print Result?'. Select 'Yes' or 'No' and press 'Enter'.
7. الصيانة
7.1. التنظيف
Wipe the tester with a soft, damp قطعة قماش. لا تستخدم منظفات كاشطة أو مذيبات. تأكد من عدم دخول أي سوائل إلى الجهاز.
7.2. Printer Paper Replacement
When the printer runs out of paper, follow the steps in Section 5.1 to replace the roll. Use only thermal paper compatible with the BT2014.
7.3. التخزين
Store the tester in its protective carry-case in a dry, cool environment, away from direct sunlight and extreme temperatures. Disconnect the battery clamps before storage.
الشكل 7.1: The Sealey BT2014 tester securely stored within its closed, protective carry case, ready for transport or long-term storage.
8. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| جهاز الاختبار لا يعمل. | Poor battery connection; Vehicle battery completely dead. | تحقق clamp connections; Ensure battery has at least 1.5V residual charge. |
| الطابعة لا تطبع. | No paper; Paper inserted incorrectly; Printer malfunction. | Replace paper roll; Re-insert paper correctly; Contact support if issue persists. |
| نتائج اختبار غير دقيقة. | Incorrect battery type/CCA input; Poor clamp connection; Corroded terminals. | Verify battery information; Clean battery terminals and ensure secure connections. |
9. المواصفات
| ميزة | مواصفة |
|---|---|
| رقم الموديل | بي تي 2014 |
| ماركة | سيلي |
| نوع القياس | مقياس متعدد |
| أبعاد المنتج (الطول × العرض × الارتفاع) | 17 × 82 × 17 ملم |
| وزن العنصر | 1566 جرام |
| مصدر الطاقة | AC (for charging/powering, specific details not provided) |
| الحد الأدنى لحجم البطاريةtage for Test | 1.5V residual charge |
10. الضمان والدعم
The Sealey BT2014 Digital Battery and Alternator Tester is covered by a ضمان لمدة 1 سنوات from the date of purchase. This guarantee covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. Terms and conditions apply.
الشكل 10.1: Official Sealey 1 Year Guarantee emblem, indicating product warranty coverage.
For technical support, warranty inquiries, or to order replacement parts (such as printer paper rolls), please contact your authorized Sealey dealer or visit the official Sealey webموقع لمعلومات الاتصال.
