دليل مستخدم وحدة الاتصال Paradox PCS250 GSM/GPRS

1. المقدمة

The Paradox PCS250 is a GSM/GPRS communication module designed to enhance the connectivity of Paradox alarm systems. It enables communication via the GSM/GPRS network, providing advanced features such as remote system management, voice alerts, and SMS notifications. This manual provides detailed instructions for the installation, operation, and maintenance of your PCS250 module.

2. معلومات السلامة

Please read all safety instructions carefully before installing and operating the PCS250 module. Failure to follow these instructions may result in damage to the device, property, or personal injury.

• يوصى بالتركيب الاحترافي: This device is designed for professional hard-wired installation.
• مصدر الطاقة: Ensure the module is connected to a stable power source. An external supplementary power supply is recommended.
• التعامل مع بطاقة SIM: Handle SIM card slots with care as they can be fragile.
• وضع الهوائي: Consider signal quality when placing the module. An antenna extension may be required in areas with weak GSM signal.
• الظروف البيئية: Do not expose the module to extreme temperatures, humidity, or direct sunlight.

3. انتهى المنتجview

The Paradox PCS250 is a compact and elegant communication module designed to integrate seamlessly with compatible Paradox alarm control panels.

3.1 الميزات الرئيسية

• GSM/GPRS communication capability.
• Direct connection to MAGELLAN MG5000/MG5050 (v4.0+), Spectra SP (v3.42+), and DIGIPLEX EVO (v2.02+) control panels.
• Supports SIA and Contact ID formats for central station monitoring.
• Voice message alerts (with VDMP3 module) to up to 5 phone numbers (8 with DIGIPLEX EVO) for various events (alert, aggression, fire, power failure, low battery).
• Remote system arm/disarm, output activation, and status check via VDMP3 voice menu.
• SMS notifications for alarms (with zone name), arm/disarm (with user name), and system troubles/restorations to up to 8 phone numbers (16 with DIGIPLEX EVO).
• SMS arm/disarm and confirmation messages.
• SIM card credit and expiry information.
• Remote management of the control panel via GPRS using WinLoad, NEware, and BabyWare software.
• Module status and GSM/GPRS signal level display.
• Firmware updates for both the control panel and PCS250 module via GPRS.
• Report transmission to digital receiver over IP network for PARADOX IPR512 and IPRS-7 software.
• Can be installed up to 300m from the control panel via CVT485 module.

3.2 محتويات العبوة

• Paradox PCS250 GSM/GPRS Communication Module
• VDMP3 Voice Communication Module (if included in package)
• دليل التثبيت (هذا المستند)

3.3 مخطط المنتج

الشكل 1: أمام view of the Paradox PCS250 module. The left side features a series of LED indicators for status and signal strength, while the right side is a smooth, white panel. The bottom edge shows the Paradox logo and a mounting screw hole.

4. الإعداد والتثبيت

The PCS250 module requires careful installation to ensure optimal performance. It is recommended that installation be performed by a qualified professional.

4.1 التحقق من التوافق

Ensure your Paradox control panel is compatible with the PCS250 module:

• MAGELLAN MG5000/MG5050: Version 4.0 or higher
• Spectra SP: Version 3.42 or higher
• DIGIPLEX EVO: Version 2.02 or higher

4.2 إدخال بطاقة SIM

1. Power off the control panel and the PCS250 module before inserting the SIM card.
2. Locate the SIM card slot(s) on the PCS250 module. There are two possible slots.
3. Carefully insert the activated SIM card into one of the slots. Ensure it is fully seated.
4. ملحوظة: SIM card slots can be fragile. Handle with extreme care.

4.3 الأسلاك والتوصيلات

1. Connect the PCS250 module directly to the control panel using the provided wiring. Refer to the control panel's manual for specific connection points.
2. If installing the module up to 300m from the control panel, use the optional CVT485 module.
3. Connect the external supplementary power supply to the PCS250 module as recommended.
4. Securely mount the PCS250 module in a location with good GSM signal reception.

5. تعليمات التشغيل

Once installed and powered, the PCS250 module will begin communicating with your Paradox control panel and the GSM/GPRS network.

5.1 مؤشرات الحالة

The LEDs on the module indicate its operational status and GSM/GPRS signal strength. Refer to the specific LED guide in the full technical manual for detailed interpretations.

5.2 SMS Notifications and Control

• استقبال الرسائل النصية القصيرة: The module sends SMS alerts for alarms, arm/disarm events, and system troubles to pre-programmed phone numbers.
• Sending SMS Commands: You can arm or disarm the system by sending specific SMS commands to the module's phone number. A confirmation message will be sent back.

5.3 Voice Communication (with VDMP3)

• التنبيهات الصوتية: In case of an alarm or specific event, the module will dial pre-programmed numbers and play a voice message describing the event.
• Voice Menu Control: By calling the module's number, you can access a voice menu (via VDMP3) to arm/disarm the system, activate outputs, or check the system status using voice commands.

5.4 Remote Management via GPRS

The PCS250 allows remote management of your control panel using Paradox software via the GPRS network:

• WinLoad: For professional installers to program and manage the control panel.
• NEware: For end-users to manage their alarm system.
• BabyWare: Another software option for system management.

Refer to the respective software manuals for detailed instructions on remote management.

6. الصيانة

Regular maintenance ensures the longevity and optimal performance of your PCS250 module.

6.1 تحديثات البرامج الثابتة

The firmware of both the control panel and the PCS250 module can be updated remotely via the GPRS network. Consult your installer or Paradox technical support for information on available updates and the update procedure.

6.2 SIM Card Management

• Credit Monitoring: The module can provide information on remaining SIM card credit and expiry. Regularly check this to ensure continuous service.
• SIM Card Replacement: If replacing the SIM card, ensure the module is powered off and handle the SIM card slot carefully.
• Operator Compatibility: Be aware that some mobile operators may have restrictions on using standard SIM cards in alarm systems. Verify compatibility with your chosen operator.

6.3 التنظيف

Clean the exterior of the module with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with the PCS250 module.

8. المواصفات

9. الضمان والدعم

Specific warranty information for the Paradox PCS250 module is typically provided at the point of purchase or within the product packaging. Please refer to your purchase documentation or contact your authorized Paradox dealer for details regarding warranty coverage and terms.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your professional installer or Paradox customer support directly. Contact information can usually be found on the Paradox official webالموقع أو على عبوة منتجك.