PROFLO PFWSC6860 Alvord Widespread Bathroom Faucet User Manual

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your PROFLO PFWSC6860 Alvord Widespread Bathroom Faucet. Please read this guide thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.

Image: PROFLO brand logo, a blue oval with 'PROFLO' written in white.

معلومات السلامة

Always observe basic safety precautions when installing or servicing plumbing fixtures. Failure to follow these instructions could result in property damage or personal injury.

• قم بإيقاف تشغيل مصدر المياه الرئيسي قبل التثبيت.
• ارتدِ نظارات وقفازات واقية أثناء التركيب.
• تأكد من استيفاء جميع متطلبات السباكة والبناء المحلية.
• لا تفرط في شد الوصلات، فقد يتسبب ذلك في تلفها.
• إذا كنت غير متأكد من أي جزء من عملية التركيب، فاستشر سباكًا مؤهلًا.

محتويات الحزمة

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact PROFLO customer service.

• مجموعة صنبور الصنبور
• Hot Water Handle Assembly
• Cold Water Handle Assembly
• Pop-Up Drain Assembly
• Mounting Hardware (washers, nuts)
• Water Supply Lines (typically included or purchased separately)

Image: A chrome widespread bathroom faucet with a high-arc spout and two separate lever handles, along with a pop-up drain rod visible behind the spout.

تحديد

تثبيت

This section outlines the general steps for installing your widespread bathroom faucet. Specific details may vary based on your sink and plumbing setup.

1. تجهيز الحوض: Ensure the sink deck has three pre-drilled holes for a widespread faucet. Clean the area around the holes.
2. تثبيت المقابض: Insert the hot and cold water handle assemblies into the outer holes of the sink deck. Secure them from underneath with washers and mounting nuts. Ensure the handles are oriented correctly.
3. تركيب صنبور الماء: Insert the faucet spout assembly into the center hole of the sink deck. Secure it from underneath with the provided washer and mounting nut.
4. ربط خطوط المياه: Connect the hot and cold water supply lines to the corresponding handle assemblies and then to your home's hot and cold water supply valves. Connect the flexible lines from the handles to the faucet spout. Hand-tighten connections, then use a wrench for a final quarter-turn. Do not overtighten.
5. تركيب مصرف منبثق: Follow the instructions provided with the pop-up drain assembly. Typically, this involves placing the drain body into the sink drain hole with a gasket, securing it from underneath, and connecting the lift rod mechanism to the faucet spout.
6. اختبار التسريبات: Once all connections are secure, slowly turn on the main water supply. Check all connections for leaks. If leaks are present, gently tighten the connections until they stop.
7. اسحب السيفون: أزل مهوية الصنبور. افتح الماء الساخن والبارد لبضع دقائق لتنظيف الأنابيب من أي شوائب. أغلق الماء، ثم أعد تركيب مهوية الصنبور.

عملية

Your PROFLO PFWSC6860 faucet features two lever handles for precise control of water temperature and flow, and a pop-up drain for basin يتحكم.

• تدفق المياه: Lift the hot water handle (typically on the left) to increase hot water flow. Lift the cold water handle (typically on the right) to increase cold water flow.
• التحكم في درجة الحرارة: اضبط المقابض الساخنة والباردة في وقت واحد لتحقيق درجة حرارة الماء المطلوبة.
• مصرف منبثق: Push down on the lift rod located behind the faucet spout to close the drain and fill the basin. Pull up on the lift rod to open the drain and allow water to empty.

الصيانة والتنظيف

Proper care will help maintain the finish and performance of your faucet.

• التنظيف المنتظم: نظّف الصنبور بانتظام بقطعة قماش ناعمة وصابون لطيف. اشطفه جيداً بالماء النظيف وجففه بقطعة قماش ناعمة لمنع ظهور بقع الماء.
• تجنب المنظفات القاسية: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.
• صيانة المهوية: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse it before reattaching.
• Drain Cleaning: Periodically remove and clean the pop-up drain stopper to prevent buildup and ensure proper drainage.

استكشاف الأخطاء وإصلاحها

راجع هذا القسم للتعرف على المشكلات الشائعة وحلولها.

الضمان والدعم

PROFLO products are manufactured to high-quality standards. For warranty information or technical assistance, please contact PROFLO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the official PROFLO webالموقع أو الاتصال بخط دعم العملاء الخاص بهم.