1. المقدمة
The SKYRC B6AC V2 is an advanced, microprocessor-controlled charge/discharge station designed for comprehensive battery management. This upgraded version of the iMAX B6AC offers enhanced accuracy and stability, along with new functionalities. It features an integral equalizer for various Lithium battery types, including LiPo, LiHV, LiFe, and LiIon, supporting up to six cells. Additionally, it is compatible with NiMH, NiCd, and Pb batteries. The charger provides a maximum charge current of 6A and a maximum charge power of 50W, ensuring efficient and safe battery maintenance.
2. معلومات السلامة
تحذير: Failure to follow these safety guidelines may result in property damage, personal injury, or death. Always prioritize safety when operating this device.
- NEVER USE THE CHARGER UNSUPERVISED! Constant monitoring is required during charging and discharging processes.
- LiPo batteries pose a شديد risk of fire if misused. Exercise extreme caution.
- Read the entire operating manual thoroughly before using this charger.
- Operate the charger in a well-cooled and well-ventilated area to prevent overheating.
- This device is intended for indoor use only. Do not expose it to rain or moisture.
- Always disconnect the power supply before making or breaking connections to the battery.
- WARNING: Explosive gases. Prevent flames and sparks near the charging area. Ensure adequate ventilation during charging.
Image: Bottom of the charger displaying critical safety warnings and input/output specifications. Note the fire hazard symbol and warnings about unsupervised use and LiPo battery risks.
3. انتهى المنتجview
3.1. المكونات (ما يوجد في العلبة)
Image: Visual representation of the items included in the product package. This includes the iMAX B6AC V2 charger, an AC power cord, a DC cable with alligator clip charging connector, and several T-plug charging cables with different connectors (Banana, Alligator Clip, XT60, Futaba, JST).
The SKYRC iMAX B6AC V2 package typically includes the following components:
- SKYRC iMAX B6AC V2 Charger/Discharger Unit
- سلك الطاقة المتردد
- DC Cable with Alligator Clip Charging Connector
- Various T-Plug Charging Cables (e.g., with Banana connector, Alligator Clip connector, XT60 connector, Futaba connector, JST connector)
3.2. الميزات الرئيسية
Image: The product packaging illustrating the key new features of the iMAX B6AC V2, including its capabilities as a Lithium Battery Meter, Battery Internal Resistance Meter, and support for PC control and firmware upgrades.
The SKYRC iMAX B6AC V2 offers a range of advanced features for comprehensive battery management:
- Dual Power AC/DC Input: Operates from both AC (100-240V) and DC (11-18V) power sources.
- دعم متعدد الكيمياء: Compatible with LiPo, LiFe, LiIon, LiHV (Lithium High Voltage), NiMH, NiCd, and Pb (Lead-Acid) battery types.
- موازن متكامل: Features an integral equalizer for six-cell Lithium-Polymer (LiPo), Lithium High Voltage, Lithium iron phosphate (LiFe), and Lithium-Ion (LiIon) batteries.
- Adjustable Terminal Voltage: Users can set the terminal voltage for specific battery types.
- PC Control & Firmware Upgrade: Connect to a PC for advanced control and to update the charger's firmware.
- Lithium Battery Meter: Allows for checking the voltage of individual cells in a Lithium battery pack.
- Battery Internal Resistance Meter: Measures the internal resistance of battery cells.
- Re-Peak Mode: Optimized charging mode for NiMH/NiCd batteries.
- مميزات السلامة: Includes Automatic Charging Current Limit, Capacity Limit, Temperature Threshold, and Processing Time Limit for enhanced safety.
صورة: المنتج الرئيسي view of the SKYRC iMAX B6AC V2 charger, showcasing its blue metallic casing, LCD display, and control buttons for navigation and operation.
4. الإعداد
Before operating the charger, ensure it is set up correctly and safely.
- توصيل الطاقة:
- مدخل التيار المتردد: Connect the supplied AC power cord to the charger's AC input port and then to a standard wall outlet (100-240V AC).
- مدخل العاصمة: Alternatively, for DC power, connect the DC input cable (with alligator clips) to a 11-18V DC power source, such as a car battery. Ensure correct polarity.
- توصيل البطارية:
- Connect your battery to the charger's main output port using the appropriate charging cable.
- For Lithium batteries (LiPo, LiFe, LiIon, LiHV), also connect the battery's balance lead to the charger's balance port. Ensure the balance lead is connected correctly, matching the cell count.
- الموقع: Place the charger and battery on a non-flammable surface in a well-ventilated area, away from any combustible materials.
5. تعليمات التشغيل
The SKYRC iMAX B6AC V2 offers various operating modes for different battery types. Navigate through the menus using the "BATT/PROG STOP", "DEC.", "INC.", and "ENTER START" buttons.
5.1. Basic Operation Flow
- تشغيل الطاقة: Connect the charger to a power source. The LCD display will illuminate.
- حدد نوع البطارية: Use the "BATT/PROG STOP" button to cycle through the main menu options until you find the desired battery type (e.g., LiPo, NiMH).
- Select Program Mode: Once the battery type is selected, use "DEC." or "INC." to choose the desired program mode (e.g., Charge, Balance Charge, Fast Charge, Storage, Discharge, Cycle).
- تعيين المعلمات: Use "DEC." and "INC." to adjust parameters such as charge current (Amps), cell count (for Lithium batteries), and discharge current. Press "ENTER START" to confirm a parameter and move to the next.
- بدء العملية: After setting all parameters, press and hold "ENTER START" for a few seconds. The charger will perform a battery check and prompt for confirmation. Confirm to begin the operation.
- مراقبة التقدم: The display will show real-time charging/discharging data. Monitor the process closely.
- إيقاف العملية: Press "BATT/PROG STOP" at any time to stop the current operation.
5.2. Specific Modes
- شحن الرصيد (LiPo/LiFe/LiIon/LiHV): This mode charges the battery while simultaneously balancing the voltage of each cell, ensuring optimal performance and longevity.
- تكلفة: Standard charging mode for all supported battery types.
- Fast Charge (LiPo/LiFe/LiIon/LiHV): Charges the battery faster but may not achieve full balance.
- Storage (LiPo/LiFe/LiIon/LiHV): Charges or discharges the battery to a specific voltage level ideal for long-term storage, preserving battery health.
- تسريح: يفرغ البطارية إلى مستوى جهد محددtage.
- Cycle (NiMH/NiCd): Performs charge/discharge or discharge/charge cycles to optimize battery capacity and eliminate memory effect.
5.3. PC Control and Firmware Upgrade
The charger can be connected to a personal computer via a mini-USB cable (not included). This allows for advanced control, data logging, and firmware updates using the dedicated SKYRC software. Refer to the SKYRC official website for software downloads and detailed instructions on PC connectivity and firmware upgrades.
6. الصيانة
Proper maintenance ensures the longevity and reliable operation of your SKYRC iMAX B6AC V2 charger.
- تنظيف: Regularly clean the charger's exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners. Ensure no dust or debris accumulates in the ventilation openings.
- تخزين: When not in use, store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect all batteries and power sources before storage.
- فحص الكابلات: Periodically inspect all cables and connectors for any signs of wear, damage, or corrosion. Replace damaged cables immediately.
- تحديثات البرامج الثابتة: Check the official SKYRC website periodically for new firmware updates. Keeping the firmware updated can improve performance and add new features.
7. استكشاف الأخطاء وإصلاحها
This section provides general guidance for common issues. For detailed troubleshooting, refer to the comprehensive manual available on the manufacturer's webموقع.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الشاحن لا يعمل. | لا يوجد مصدر طاقة؛ توصيل الطاقة غير صحيح. | Ensure AC or DC power cable is securely connected and power source is active. Check power outlet/DC source. |
| خطأ "انقطاع الاتصال". | Battery not connected; poor connection; incorrect balance lead connection. | Verify all battery connections (main and balance leads) are secure and correctly inserted. |
| "خطأ في الخلية" أو "حجمtagخطأ هـ". | Incorrect cell count setting; damaged battery cell. | Confirm the cell count setting matches your battery. Inspect battery for damage. |
| يصبح الشاحن ساخنًا أثناء التشغيل. | Normal operation; insufficient ventilation. | Some heat is normal. Ensure adequate ventilation around the charger. Do not block air vents. Reduce charge current if excessive. |
8. المواصفات
Image: Dimensional drawing of the SKYRC iMAX B6AC V2 charger, indicating its physical size.
| ميزة | التفاصيل |
|---|---|
| حجم الإدخالtage | AC 100-240V (1A Max), DC 11-18V (5A Max) |
| قوة الشحن | ماكس. 50W |
| التفريغ السلطة | ماكس. 5W |
| نطاق تيار الشحن | 0.1-6.0 أمبير |
| نطاق تيار التفريغ | 0.1-2.0 أمبير |
| LiPo/LiFe/LiIon/LiHV Cell Count | خلايا شنومكس-شنومكس |
| NiMH/NiCd Cell Count | خلايا شنومكس-شنومكس |
| جهد بطارية الرصاصtage | 2-20 فولت |
| أبعاد المنتج (الطول × العرض × الارتفاع) | 144 ملم × 135 ملم × 36 ملم (5.67 × 5.31 × 1.42 بوصات) |
| وزن العنصر | 632 جم (1.39 رطل) |
| رقم الموديل | 43227-562 |
9. الضمان والدعم
For information regarding product warranty, please refer to the documentation provided with your purchase or contact the seller directly. The manufacturer, SKYRC, provides support for their products. For technical assistance, firmware updates, or detailed operational guides, please visit the official SKYRC webموقع.
While RotorLogic is an authorized reseller, direct product support and warranty claims are typically handled by the manufacturer, SKYRC, or through the point of purchase.
