دليل مستخدم مصباح الدراجة الخلفي الذكي ANTUSI A6

1. المقدمة

Thank you for choosing the ANTUSI A6 Intelligent Bike Tail Light. This device combines a powerful rear bicycle light with an advanced anti-theft alarm system, a wireless bell, and a remote control for convenient operation. Designed for enhanced safety and security, the A6 model is waterproof and USB rechargeable, making it an ideal accessory for any cyclist.

المميزات الرئيسية:

• Intelligent COB LED Tail Light
• Wireless Anti-Theft Alarm (up to 120dB)
• تشغيل التحكم عن بعد
• Wireless Bicycle Bell Function
• USB Rechargeable Battery (850mAh)
• تصنيف مقاومة الماء IP67
• RF (433MHz) Bicycle Finding Function (up to 100M)

محتويات الحزمة:

• ANTUSI A6 Tail Light Unit
• جهاز التحكم عن بعد
• كابل شحن USB
• Seat Mount Bracket and Accessories
• دليل المستخدم (هذا المستند)

2. انتهى المنتجview

Familiarize yourself with the components of your ANTUSI A6 device.

Figure 2.1: ANTUSI A6 Tail Light and Remote Control Components

• أزرار التحكم عن بعد:
• Lock Button: Arm the alarm.
• Unlock Button: Disarm the alarm.
• Lightning Bolt Button: Mode switch for tail light.
• Bell Button: Activate wireless bell.
• Tail Light Components:
• USB Jack: For charging.
• Tail Light Button: Manual control for tail light.
• Tail Light Screw Deduction: Mounting point.
• الذيل Lamp Base: Mounting bracket.

3. الإعداد والتثبيت

3.1 Charging the Tail Light

Before first use, fully charge the tail light. Connect the provided USB charging cable to the USB jack on the tail light and to a standard USB power adapter (not included). The charging indicator will show the charging status (e.g., red for charging, green for fully charged). A full charge typically takes 2-3 hours.

3.2 تركيب الضوء الخلفي

1. Attach the tail lamp base to the underside of your bicycle seat using the provided screws and accessories. Ensure it is securely fastened.
2. Slide the ANTUSI A6 tail light unit onto the mounted base until it clicks into place. Ensure the tail light is firmly attached and facing rearward.

Figure 3.1: Tail Light Mounted on Bicycle Seat

The tail light is designed for seat mount installation and features IP67 waterproofing and USB charging capabilities.

4. تعليمات التشغيل

4.1 Tail Light Operation

• التحكم اليدوي: Press the Tail Light Button on the device to cycle through different lighting modes (e.g., steady, flashing, pulse) or to turn the light off.
• جهاز التحكم عن بعد: Press the Lightning Bolt Button on the remote control to cycle through the tail light modes.

4.2 Anti-Theft Alarm

• تفعيل الإنذار: اضغط على زر القفل on the remote control. The tail light will emit a confirmation sound, indicating the alarm is armed. Any vibration or movement detected will trigger a loud alarm (up to 120dB).
• تعطيل الإنذار: اضغط على زر فتح القفل on the remote control. The tail light will emit a confirmation sound, indicating the alarm is disarmed.

Figure 4.1: Arming the Anti-Theft Alarm

The alarm can be armed with a single press of the lock button on the remote, providing a high-decibel deterrent against theft.

4.3 Wireless Bell Function

اضغط على زر الجرس on the remote control to activate the wireless bell sound. This can be used to alert pedestrians or other cyclists.

4.4 Bicycle Finding Function (RF 433MHz)

In dark environments or crowded areas, you can use the remote control to locate your bicycle. Press the زر القفل (or a specific finding button if available, otherwise the lock button often doubles) on the remote. The tail light will emit a sound, helping you pinpoint your bike's location up to a measured maximum distance of 100 meters.

Figure 4.2: Using the Bicycle Finding Function

The RF 433MHz technology allows you to locate your bike from up to 100 meters away by triggering an audible signal from the tail light.

5. الصيانة

• تنظيف: Wipe the tail light and remote control with a soft, damp قماش. لا تستخدم مواد كيميائية قاسية أو منظفات كاشطة.
• الشحن: Recharge the tail light regularly, especially if it has not been used for an extended period, to maintain battery health.
• مقاومة الماء: The device has an IP67 waterproof rating, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged submersion and ensure the USB port cover is securely closed.
• تخزين: قم بتخزين الجهاز في مكان بارد وجاف عندما لا يكون قيد الاستخدام.

6. استكشاف الأخطاء وإصلاحها

• Tail Light Not Turning On: Ensure the device is fully charged. Press the tail light button or the remote's lightning bolt button.
• Alarm Not Responding to Remote: Check the remote control's battery. Ensure you are within the effective range (approx. 100M). Re-pair the remote if necessary (refer to manufacturer's specific pairing instructions, if not provided, assume factory paired).
• Alarm Triggering Randomly: The alarm sensitivity might be too high. Ensure the bike is stable when armed.
• مشاكل الشحن: Verify the USB cable and power adapter are working correctly. Ensure the USB port on the tail light is clean and free of debris.

7. المواصفات

8. الضمان والدعم

For warranty information or technical support, please contact ANTUSI customer service through the retailer where you purchased the product or visit the official ANTUSI webيرجى الاحتفاظ بإثبات الشراء الخاص بك للمطالبة بالضمان.