المنتج انتهىview
The Milescraft Driver Set includes a 3-inch and a 6-inch T20 Torx Star driver. These drivers feature magnetic tips and are designed for compatibility with the Milescraft Connector for quick bit changes. They are engineered to allow pocket screws to align with maximum precision and to handle maximum torque settings without stripping. The 3-inch driver is ideal for tighter or more compact spaces that the 6-inch driver cannot access. Both drivers are compatible with any T20 Torx Screw.
Image: The Milescraft 2308 DriverSet, showing both the 3-inch and 6-inch T20 Torx drivers in their retail packaging.
المميزات الرئيسية:
- Includes 6-inch magnetic T20 Star driver.
- Includes 3-inch magnetic T20 Star driver.
- Designed for maximum torque settings without stripping.
- Enables pocket screws to align with maximum precision.
- 3-inch driver suitable for compact or tight spaces.
- Tips are hardened for extended life expectancy.
يثبت
Setting up your Milescraft DriverSet is straightforward. These bits are designed for use with standard 1/4-inch hex shank compatible drill chucks or impact drivers.
- Select the Appropriate Driver: Choose between the 3-inch driver for confined spaces or the 6-inch driver for extended reach, depending on your application.
- Insert into Tool: Insert the hex shank end of the selected T20 Torx driver bit firmly into your drill's chuck or impact driver's quick-change collar until it is securely seated.
- التحقق من الملاءمة الآمنة: Gently pull on the driver bit to ensure it is locked in place and will not slip during operation.
الصورة: لقطة مقربة view of the T20 Torx driver bit tip, highlighting its star-shaped design for secure fastening.
تعليمات التشغيل
The Milescraft T20 Torx Driver Bits are designed for driving T20 Torx head screws, particularly those used in pocket hole joinery systems. Their magnetic tips help hold screws in place during driving.
- Prepare Your Workpiece: Ensure your workpiece is properly clamped and the pocket holes are drilled according to your project's requirements.
- قم بوضع البرغي: Place a T20 Torx head screw into the pocket hole. The magnetic tip of the driver bit will help hold the screw in alignment.
- قم بتدوير البرغي: With your drill or impact driver set to an appropriate torque, slowly begin driving the screw. Apply steady, even pressure. The T20 Torx design minimizes cam-out (slipping) and allows for maximum torque transfer.
- تحقيق الدقة: Continue driving until the screw is fully seated and the joint is secure. The design of these drivers aids in achieving precise alignment for strong pocket hole joints.
Image: A Milescraft T20 Torx driver bit actively driving a screw into a wooden workpiece, demonstrating its application.
Image: The T20 Torx driver bit being used in conjunction with a pocket hole jig, illustrating its intended use for precise joinery.
صيانة
Proper maintenance will extend the life and performance of your Milescraft DriverSet.
- تنظيف: After each use, wipe down the driver bits with a clean, dry cloth to remove any dust, wood chips, or debris. Avoid using harsh chemicals or abrasive cleaners.
- تخزين: Store the driver bits in a dry environment to prevent rust. The original packaging or a dedicated bit holder is recommended to keep them organized and protected from damage.
- تقتيش: Periodically inspect the tips of the driver bits for signs of wear, such as rounding or chipping. While the tips are hardened for maximum life, excessive wear can lead to stripping screws. Replace bits if significant wear is observed.
- Magnetic Tip Care: Keep the magnetic tips free of metal shavings, as these can reduce the magnetic holding power.
استكشاف الأخطاء وإصلاحها
Here are some common issues and their solutions when using your T20 Torx driver bits:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Screw head stripping (cam-out) | Incorrect bit size, insufficient pressure, worn bit, excessive speed. | Ensure you are using a T20 Torx bit. Apply firm, consistent pressure. Reduce drill speed. Inspect bit for wear and replace if necessary. |
| Bit not holding screw magnetically | Metal shavings on tip, weakened magnet. | Clean the tip thoroughly to remove any metal debris. If the magnet is permanently weakened, consider replacing the bit. |
| Bit slipping in drill chuck/driver | Chuck not tightened sufficiently, worn hex shank. | Ensure the chuck is tightened securely around the hex shank. If the shank is rounded or damaged, the bit may need replacement. |
تحديد
| يصف | التفاصيل |
|---|---|
| ماركة | ميلسكرافت |
| رقم الموديل | 23080003 |
| طول العنصر | 3 Inches and 6 Inches (two bits included) |
| مادة | S2 الصلب |
| نظام القيادة | Star, Torx (T20) |
| عدد القطع | 2 |
| رمز المنتج الموحد | 737888230808 |
| وزن العنصر | 1.6 أونصات |
| مجموعة أدوات التثبيت المتوافقة | مسامير T20 توركس |
| المكونات المضمنة | 3" Magnetic T20 Torx Driver Bit, 6" Magnetic T20 Torx Driver Bit |
معلومات الضمان
The Milescraft 2308 DriverSet comes with a ضمان لمدة 90 يومًا. This warranty covers manufacturing defects and ensures the product meets Milescraft's quality standards. For specific details regarding warranty claims or coverage, please refer to the official Milescraft webالموقع أو الاتصال بخدمة دعم العملاء الخاصة بهم.
الدعم والاتصال
For further assistance, product inquiries, or to explore other Milescraft products, please visit the official Milescraft webالموقع أو متجر علامتهم التجارية.
- Milescraft Official Webموقع: www.milescraft.com
- Milescraft Amazon Store: Visit Milescraft Store on Amazon
Image: The Milescraft brand logo with the slogan "Always the Better Idea," representing the company's commitment to innovative solutions.
