Valore 7 Retrofit Easy Install Shower Panel

1. انتهى المنتجview

The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.

This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.

Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.

2. معلومات السلامة

• تأكد من إغلاق جميع خطوط إمداد المياه قبل البدء في التثبيت.
• ارتدِ معدات الحماية الشخصية المناسبة، مثل نظارات السلامة والقفازات، أثناء التثبيت.
• إذا لم تكن متأكدًا من أي جزء من عملية التثبيت، فاستشر سباكًا مؤهلًا.
• Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.

3. محتويات العبوة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

• Shower Panel Unit
• رأس الدش
• Shower Wand (Handheld Shower)
• Shower Cradle for Handheld Shower
• معدات التركيب
• Flexible Hoses for Water Connection
• دليل التثبيت

4. المواصفات

5. أبعاد

Refer to the diagram below for detailed product dimensions.

Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.

6. تعليمات التثبيت

The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.

6.1 التثبيت المسبق

1. إيقاف تشغيل إمدادات المياه: Locate and turn off the main water supply to your bathroom or entire home.
2. Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
3. Inspect Plumbing: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
4. Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.

6.2 تركيب اللوحة

5. التمركز: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
6. ثقوب الحفر: قم بحفر ثقوب توجيهية في المواقع المحددة. أدخل مثبتات الحائط إذا لزم الأمر.
7. أقواس آمنة: قم بتثبيت حوامل التثبيت على الحائط باستخدام البراغي المتوفرة.
8. ملحق اللوحة: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.

6.3 توصيل خطوط المياه

9. ربط الخراطيم: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
10. دش يدوي: Connect the handheld shower hose to its designated outlet on the panel.
11. افتح الماء: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
12. Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.

Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.

7. تعليمات التشغيل

The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.

7.1 التحكم في تدفق المياه

Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.

7.2 Selecting Spray Modes

The panel has a control knob or lever to switch between the three spray modes:

• دش المطر: Provides a wide, gentle rainfall-like spray from the overhead shower head.


Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.

• نفاثات الجسم: Delivers targeted streams of water from the integrated body massage jets.

Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
• دش يدوي: Directs water flow to the brass shower wand for focused rinsing or cleaning.

Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.

8. الصيانة

8.1 التنظيف

• Clean the stainless steel surface regularly with a soft cloth and mild soap or a non-abrasive stainless steel cleaner.
• Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
• For hard water spots, use a solution of white vinegar and water, then rinse thoroughly.
• Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.

8.2 العناية العامة

• Ensure all connections remain tight to prevent leaks.
• If any part becomes loose, gently tighten it. Do not overtighten.

9. استكشاف الأخطاء وإصلاحها

10. الضمان والدعم

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.