مقدمة
This manual provides instructions for the setup, operation, and maintenance of your myTouchSmart Digital Bar Outlet Timer, Model 26745. Please read these instructions carefully before use and retain them for future reference.
The myTouchSmart Digital Bar Outlet Timer is designed to automate the ON/OFF cycles of indoor lights, lamps, small appliances, and electronics. It features a space-saving design, a digital display, and two programmable custom ON/OFF times.
تعليمات السلامة الهامة
- للاستخدام الداخلي فقط.
- Do not exceed electrical ratings: 125V AC, 60Hz, 15A (1875W) General Purpose/Resistive, 5A (625W) Tungsten, 1/2 HP.
- Do not use with appliances that have heating elements, such as coffee makers, toasters, or heaters, as this may create a fire hazard.
- Ensure the timer is fully inserted into the outlet.
- Do not immerse in water or use in wet locations.
- Keep children away from the timer.
- لا تقم بتفكيك الوحدة. لا توجد أجزاء قابلة للصيانة من قبل المستخدم في الداخل.
مميزات المنتج
- Space-saving slim bar design.
- One (1) polarized outlet.
- Digital display for easy programming.
- Two custom daily ON/OFF times.
- Backup battery to save settings during power outagإِسْ
- Compatible with CFL, LED, incandescent, and halogen light sources.
وصف الصورة: A detailed diagram of the myTouchSmart Digital Bar Outlet Timer, highlighting its components such as the custom ON/OFF time buttons, clock/set mode indicator, active program indicator, AM/PM indicator, and scroll buttons. This image helps users identify the different parts of the timer for programming.
الإعداد والتكوين الأولي
1. Charging the Backup Battery
Before initial use, plug the timer into a live electrical outlet for at least 30 minutes to charge the internal backup battery. This battery retains your settings during power outages or when the timer is unplugged.
2. ضبط الوقت الحالي
- اضغط مع الاستمرار على ساعة زر.
- بينما يحمل ساعةاضغط على ▲ (أعلى) أو ▼ (down) button to adjust the hour. The AM/PM indicator will change accordingly.
- أطلق سراح ساعة button when the correct hour is set.
- اضغط مع الاستمرار على ساعة الزر مرة أخرى.
- بينما يحمل ساعةاضغط على ▲ (أعلى) أو ▼ (down) button to adjust the minutes.
- أطلق سراح ساعة button when the correct minute is set.
وصف الصورة: This image illustrates the "Simple Setup" process for the timer. It shows the digital display and buttons, with arrows pointing to the scroll buttons for setting the current time and the "my on time" and "my off time" buttons for custom programming. The image emphasizes the ease of setting up the device.
تعليمات التشغيل
Programming Custom ON/OFF Times
The timer allows for two custom daily ON/OFF programs. Follow these steps to set your desired schedules:
البرنامج 1:
- اضغط على أنا في الموعد المحدد button (left side) once. The display will show "1 ON".
- اضغط على ▲ (أعلى) أو ▼ (down) button to adjust the desired ON hour for Program 1.
- اضغط على أنا في الموعد المحدد اضغط على الزر مرة أخرى لتأكيد الساعة والانتقال إلى الدقائق.
- اضغط على ▲ (أعلى) أو ▼ (down) button to adjust the desired ON minutes for Program 1.
- اضغط على أنا في الموعد المحدد button again to save the ON time.
- اضغط على وقت فراغي button (left side) once. The display will show "1 OFF".
- اضغط على ▲ (أعلى) أو ▼ (down) button to adjust the desired OFF hour for Program 1.
- اضغط على وقت فراغي اضغط على الزر مرة أخرى لتأكيد الساعة والانتقال إلى الدقائق.
- اضغط على ▲ (أعلى) أو ▼ (down) button to adjust the desired OFF minutes for Program 1.
- اضغط على وقت فراغي button again to save the OFF time.
البرنامج 2:
Repeat the steps above using the أنا في الموعد المحدد و وقت فراغي الأزرار الموجودة على الجانب الأيمن of the timer. The display will show "2 ON" and "2 OFF" respectively.
وصف الصورة: This image displays two examples of how to program the timer. Program 1 is set to turn ON at 6:00 A.M. and OFF at 9:00 A.M. Program 2 is set to turn ON at 4:00 P.M. and OFF at 10:00 P.M. This visual guide helps users understand how to set their own custom schedules.
Connecting an Appliance
Once programmed, plug the appliance or light you wish to control into the polarized outlet on the side of the timer. Ensure the appliance's power switch is in the ON position for the timer to control its power cycle.
وصف الصورة: The image shows the myTouchSmart Digital Bar Outlet Timer plugged into a standard wall outlet. A lamp's power cord is then plugged into the polarized outlet on the side of the timer, demonstrating how to connect a device for timed operation. The slim design of the timer is visible, not obstructing the second wall outlet.
صيانة
- تنظيف: Disconnect the timer from the power outlet before cleaning. Wipe with a dry, soft cloth. Do not use liquid or abrasive cleaners.
- بطارية: The internal backup battery is not user-replaceable. If the display becomes dim or settings are not retained after charging, the unit may need replacement.
- تخزين: قم بتخزين المؤقت في مكان بارد وجاف عند عدم استخدامه.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الجهاز لا يعمل/يتوقف في الأوقات المبرمجة. |
|
|
| العرض باهت أو فارغ. |
|
|
| تُفقد الإعدادات بعد انقطاع التيار الكهربائيtage or unplugging. | Backup battery is not sufficiently charged or has reached end of life. | Plug the timer into a live outlet for at least 30 minutes. If the issue persists, the internal battery may need replacement (unit replacement). |
تحديد
- نموذج: 26745
- تصنيف الكهرباء: 125V AC، 60Hz
- أقصى حمل: 15A (1875W) General Purpose/Resistive
- Tungsten Load: 5A (625W)
- تحميل المحرك: 1 / 2 HP
- المنافذ: 1 Polarized
- أبعاد: حوالي 2 × 2.5 × 1.25 بوصة
- شهادة: CSA
الضمان والدعم
This product is backed by a one-year limited warranty. For warranty claims or technical support, please contact myTouchSmart customer service. Refer to the product packaging or the manufacturer's webموقع لمعلومات الاتصال.
الشركة المصنعة: شركة جاسكو للمنتجات ذ.م.م
