Anderic RR7096T Thermostatic Remote Control Instruction Manual

1. المقدمة

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Anderic RR7096T Thermostatic Remote Control. This remote is designed as a direct replacement for original Hampton Bay and Harbor Breeze ceiling fan remotes, specifically those with FCC IDs such as CHQ7096T, UC7096T, CHQ8BF7096T, and CHQ8BT7096T.

The RR7096T offers control over fan speeds, light functions (including dimming), and thermostatic settings. It is important to note that this remote operates only the down-lights of a ceiling fan and does not include a 'Reverse' key for fan direction. For proper light dimming functionality, incandescent bulbs are required.

2. معلومات السلامة

• احتفظ بالبطاريات بعيدًا عن متناول الأطفال.
• لا تخلط بين البطاريات القديمة والجديدة أو أنواع مختلفة من البطاريات.
• تخلص من البطاريات المستخدمة وفقا للوائح المحلية.
• Avoid exposing the remote control to extreme temperatures, moisture, or direct sunlight.

3. محتويات العبوة

تأكد من أن الحزمة الخاصة بك تحتوي على العناصر التالية:

• Anderic RR7096T Thermostatic Remote Control
• حامل التثبيت على الحائط
• Two screws for wall mount installation

4. الإعداد

4.1. تركيب البطارية

1. قم بإزالة غطاء حجرة البطارية الموجود على الجزء الخلفي من جهاز التحكم عن بعد.
2. أدخل أربع (4) بطاريات AAA، مع التأكد من صحة القطبية (+/-).
3. قم باستبدال غطاء حجرة البطارية.

4.2. Dip-Switch Matching

The RR7096T remote control operates by matching its dip-switch settings to those of your ceiling fan's receiver. This is the primary method of pairing the remote with your fan.

1. Locate the dip-switches inside the battery compartment of your new RR7096T remote.
2. Identify the dip-switches on your existing ceiling fan receiver or original remote control. The receiver is typically located in the ceiling fan's canopy.
3. Carefully match the position of the dip-switches (ON/OFF or UP/DOWN) on the new RR7096T remote to the exact pattern of your fan's receiver or original remote.
4. Once the dip-switches are matched, the remote should operate your ceiling fan without further programming.

الشكل 1: Back of the Anderic RR7096T remote control, illustrating the battery compartment and the internal dip-switches that must be matched to your ceiling fan receiver for proper operation.

4.3. تركيب التثبيت على الحائط

The included wall mount bracket allows for convenient storage of your remote control.

1. Choose a suitable location on a wall, away from direct heat or moisture.
2. Use the two provided screws to securely attach the wall mount bracket to the wall.
3. Slide the remote control into the bracket for storage.

الشكل 2: The Anderic RR7096T remote control securely placed in its transparent wall mount bracket, demonstrating how it can be stored when not in use.

5. تعليمات التشغيل

The Anderic RR7096T remote control features a clear LCD display and dedicated buttons for various functions. Refer to the image below for button identification.

الشكل 3: أمام view of the Anderic RR7096T remote control, displaying its LCD screen and various control buttons for fan and light functions.

5.1. التحكم في المروحة

• تشغيل / إيقاف تشغيل المروحة: Press the blue fan button to cycle through fan speeds (Low, Medium, High) and turn the fan off.
• مروحة أوتوماتيكية: Activates the thermostatic fan control. The fan will automatically adjust its speed based on the room temperature and your set temperature.
• مؤقت المروحة: Sets a timer for the fan to operate for a specified duration.
• TEMP./SET HOUR (Up/Down Arrows): Adjusts the desired temperature for FAN AUTO mode or sets the hour for timer functions.

5.2. التحكم في الضوء

• تشغيل / إيقاف / تعتيم الضوء: Press the yellow light button to turn the down-lights on or off. Hold the button to dim or brighten the lights.
• LIGHT TIMER: Sets a timer for the light to turn off after a specified duration.
• LIGHT DELAY: Activates a delay for the light to turn off, allowing time to exit the room.

ملاحظة هامة: This remote control is designed to operate only the down-lights of your ceiling fan. It will not control separate up-lights if your fan is equipped with them. For proper dimming functionality, ensure your fan uses incandescent bulbs.

6. الصيانة

6.1. استبدال البطارية

When the remote's display becomes dim or its response time slows, it is time to replace the batteries. Follow the battery installation steps in Section 4.1.

6.2. التنظيف

امسح جهاز التحكم عن بعد بقطعة قماش ناعمة وجافة. لا تستخدم منظفات كاشطة أو تغمر جهاز التحكم في الماء.

7. استكشاف الأخطاء وإصلاحها

• جهاز التحكم عن بعد لا يستجيب:
  • تحقق من مستويات البطارية واستبدلها إذا لزم الأمر.
  • Verify that the dip-switches in the remote match the settings of your ceiling fan receiver (refer to Section 4.2).
  • Ensure there are no obstructions between the remote and the fan receiver.
• Lights not dimming properly:
  • Confirm that your ceiling fan uses incandescent bulbs. LED or CFL bulbs may not dim correctly with this remote.
• Fan not operating at desired speed in AUTO mode:
  • Check the set temperature on the remote's display and adjust using the TEMP./SET HOUR buttons.

8. المواصفات

9. معلومات الضمان

The Anderic RR7096T Thermostatic Remote Control comes with a ضمان استبدال لمدة عامين. Please retain your proof of purchase for warranty claims. For details on how to claim your warranty, refer to the manufacturer's official webالموقع أو الاتصال بخدمة دعم العملاء الخاصة بهم.

10. الدعم

For further assistance, troubleshooting tips, or to inquire about compatible receivers (such as UC7067FCRX or UC70960TX if needed), please visit the official Anderic website or contact their customer support department. Contact information can typically be found on the product packaging or the manufacturer's webموقع.