دليل مستخدم مقعد السيارة جراكو سناج رايد آي-سايز

مقدمة

The Graco SnugRide i-Size Car Seat is designed to provide a safe and comfortable travel solution for your child. This car seat allows for rear-facing installation, suitable for toddlers up to 18 months of age. It features a 7-way adjustable seat, a removable seat reducer for newborns with side foam pads for optimal comfort, and a height-adjustable belt and headrest system. The integrated ISOFIX base ensures secure and straightforward installation in your vehicle, complemented by energy-absorbing foam for enhanced shock protection.

Image: The Graco SnugRide i-Size car seat in Night Black, shown with its ISOFIX base, ready for installation.

معلومات هامة حول السلامة

Please read all instructions carefully before using the car seat. Failure to follow these instructions could result in serious injury or death.

• Always ensure the car seat is correctly installed and secured in the vehicle according to the instructions.
• لا تترك طفلك أبداً دون مراقبة في مقعد السيارة.
• Ensure the harness is properly adjusted and snug against your child's body, with no slack.
• The car seat is designed for rear-facing use for children up to 18 months of age.
• لا تستخدم مقعد السيارة إذا تعرض لحادث، حتى لو لم يكن هناك أي ضرر ظاهر. استبدله فوراً.
• راجع دليل مالك سيارتك للاطلاع على إرشادات تركيب مقعد السيارة المحددة.

عناصر

The Graco SnugRide i-Size Car Seat system includes the following main components:

• SnugRide i-Size Car Seat: The main seat unit with integrated harness system and canopy.
• قاعدة ISOFIX: The base unit that attaches to your vehicle's ISOFIX anchors, providing a secure and stable platform for the car seat.
• Newborn Seat Reducer: Padded insert for infants, providing additional support and comfort.

الصورة: الجبهة view of the Graco SnugRide i-Size car seat, highlighting the seat reducer and harness system.

الإعداد والتثبيت

Follow these steps to correctly install your Graco SnugRide i-Size Car Seat using the ISOFIX base.

Installing the ISOFIX Base:

1. Position the ISOFIX base on the desired vehicle seat. Ensure the vehicle seat is suitable for ISOFIX installation.
2. Extend the ISOFIX connectors from the base.
3. Align the ISOFIX connectors with your vehicle's ISOFIX anchor points. Push the base firmly until the connectors click into place and the indicators turn green.
4. Extend the load leg until it firmly touches the vehicle floor. Ensure the indicator on the load leg also turns green.
5. Wiggle the base to ensure it is securely attached and does not move excessively.

Image: A woman demonstrating the installation of the ISOFIX base into a vehicle's rear seat.

تثبيت مقعد السيارة بالقاعدة:

1. Place the SnugRide i-Size car seat onto the installed ISOFIX base.
2. Push down firmly until you hear an audible click, indicating the car seat is securely latched onto the base.
3. Verify that the indicators on the base confirm correct attachment of the car seat (refer to base indicators for specific color/symbol).

تشغيل مقعد السيارة

Placing Your Child in the Seat:

1. Open the harness buckles and position your child in the car seat.
2. Bring the shoulder straps over your child's shoulders and connect the buckle tongues into the crotch buckle until they click.
3. Pull the harness adjustment strap to tighten the harness until it is snug against your child's body. You should not be able to pinch any slack at the shoulder.
4. تأكد من أن مشبك الصدر موضوع عند مستوى الإبط.

Image: A baby comfortably and securely seated in the Graco SnugRide i-Size car seat, demonstrating proper harness usage.

Adjusting the Headrest and Harness:

The headrest and harness system can be adjusted simultaneously with one hand to accommodate your child's growth.

1. Locate the headrest adjustment lever, typically at the top rear of the car seat.
2. Squeeze the lever and slide the headrest up or down to the desired position. The shoulder straps will adjust automatically.
3. Ensure the shoulder straps are at or just below your child's shoulders for rear-facing use.

Image: A hand demonstrating the one-hand adjustment of the headrest and harness system on the car seat.

Adjusting Seat Recline:

The car seat offers a 7-way adjustable seat for optimal comfort and legroom as your child grows.

1. Locate the recline adjustment handle, usually at the front or side of the base.
2. Press the handle and adjust the seat to one of the 7 available recline positions.
3. Ensure the recline angle is appropriate for your child's age and the vehicle's seating angle, maintaining a safe and comfortable position.

Image: A toddler seated in the Graco SnugRide i-Size car seat, illustrating the extended legroom provided by the adjustable seat.

صيانة

تعليمات التنظيف:

• أغطية قماشية: Machine wash removable fabric covers in cold water on a delicate cycle. Do not bleach. Tumble dry on low heat or hang to dry.
• أحزمة التثبيت: امسح أحزمة الأمان بالإعلانamp cloth and mild soap. Do not machine wash or submerge harness straps in water, as this can weaken the webبنج.
• الأجزاء البلاستيكية والمعدنية: امسح الأجزاء البلاستيكية والمعدنية بالإعلانamp قماش وصابون خفيف. لا تستخدم المنظفات الكاشطة أو المذيبات.

تخزين:

When not in use, store the car seat in a cool, dry place away from direct sunlight and extreme temperatures.

استكشاف الأخطاء وإصلاحها

تحديد

• رقم الموديل: 1986604
• أبعاد المنتج: 54 × 35 × 72 سم
• وزن السلعة: 12.3 كجم
• لون: بلاكون
• نوع المادة: رغوة
• أسلوب: مقعد السيارة
• Manufacturer's Suggested Maximum Weight: 13 كيلوغرام
• الفئة العمرية (الوصف): طفل صغير
• نوع التثبيت: ISOFIX Base (integrated)
• الشركة المصنعة: NEWELL GERMANY GMBH
• تاريخ التوفر الأول: 30 مارس 2017

الضمان والدعم

For warranty information, product registration, or further support, please visit the official Graco webالموقع الإلكتروني أو تواصل مع قسم خدمة العملاء. احتفظ بإثبات الشراء لطلبات الضمان.

شركة جراكو الرسمية Webموقع: www.gracobaby.com