دليل مستخدم واجهة بيانات Axxess GM مع SWC (AX-GMCL2-SWC)

مقدمة

The Axxess AX-GMCL2-SWC Data Interface is designed for aftermarket head unit installations in select GM vehicles from 2000 to 2013. This interface provides essential functionalities such as accessory power, retention of Retained Accessory Power (RAP), chimes, steering wheel audio controls, and the factory auxiliary input. It also ensures the retention of OnStar and original equipment (OE) Bluetooth capabilities. This unit is compatible with both non-amplified and analog/digital amplified vehicle models.

محتويات الحزمة

• Axxess GM Data Interface (AX-GMCL2-SWC)
• ضفائر الأسلاك الخاصة بالمركبة
• دليل التعليمات (هذا المستند)

Image: The Axxess AX-GMCL2-SWC data interface module (black box) and the accompanying wiring harnesses, including vehicle-specific connectors, RCA cables, and bare wire leads for various connections.

الإعداد والتثبيت

Installation of the AX-GMCL2-SWC requires careful attention to wiring connections. It is recommended that installation be performed by a qualified professional.

التوافق

This interface is designed for specific GM vehicles manufactured between 2000 and 2013. Verify your vehicle's compatibility before proceeding with installation.

توصيلات الأسلاك

Connect the provided wiring harnesses to your aftermarket head unit and the vehicle's factory wiring. Key connections include:

• قوة الملحق: يوفر 12 فولت 10-amp accessory output.
• NAV Outputs: Includes outputs for parking brake, reverse, mute, and speed sense signals, essential for navigation-equipped head units.
• التحكم في عجلة القيادة (SWC): Connect the SWC wire(s) to your aftermarket radio's steering wheel control input. Refer to your radio's manual for specific wiring.
• اتصالات الصوت: Ensure proper connections for audio signals, including retention of balance and fade.
• Chime Module: The interface integrates with the vehicle's chime system. Adjust chime volume using the potentiometer on the module if available.

Always consult the detailed wiring diagram provided with your specific product packaging for precise color-coded connections.

التكوين الأولي

After all connections are made, follow the specific power-up and programming sequence outlined in the product's included quick-start guide to ensure proper communication between the interface and your aftermarket radio. This typically involves turning the ignition on and off in a specific pattern.

تعليمات التشغيل

Once installed and configured, the AX-GMCL2-SWC enables the following retained features:

• الضوابط عجلة القيادة: Operate volume, track/station, mode, and other functions directly from your vehicle's steering wheel buttons.
• Retained Accessory Power (RAP): The radio will remain on for a short period after the ignition is turned off, until a door is opened, mimicking factory behavior.
• أجراس السيارة: All factory warning chimes (e.g., seatbelt, door ajar) will be reproduced through the aftermarket audio system.
• OnStar and OE Bluetooth: If your vehicle is equipped, these features will continue to function through the interface.
• Factory Auxiliary Input: The original auxiliary input, if present, will be retained and accessible through your new head unit.

صيانة

The AX-GMCL2-SWC is designed for long-term reliability and typically requires minimal maintenance. Consider the following:

• اتصالات آمنة: Periodically check that all wiring connections remain secure and free from corrosion.
• تحديثات البرامج الثابتة: The module is Micro B USB updatable. Check the Axxess website for any available firmware updates that may improve performance or address compatibility issues. Use the official PC software for updates.
• العوامل البيئية: Ensure the module is installed in a dry, stable environment within the vehicle's dashboard, away from excessive heat or moisture.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your AX-GMCL2-SWC, review خطوات استكشاف الأخطاء وإصلاحها الشائعة التالية:

• لا يوجد طاقة للراديو:
  • تأكد من أن جميع توصيلات الطاقة والأرضية آمنة.
  • افحص فيوزات السيارة.
  • Ensure the interface module is properly connected to the vehicle's data bus.
• عناصر التحكم في عجلة القيادة لا تعمل:
  • Confirm the SWC wire from the interface is correctly connected to the aftermarket radio's SWC input (e.g., 3.5mm jack or specific wire).
  • Ensure the interface is programmed for your specific radio brand/model. If auto-detection fails, use the PC software for manual configuration.
  • Some steering wheel buttons (e.g., "Source Down" or "OnStar" on older GM models) may not be remappable or supported by all aftermarket radios.
• No Chimes or Incorrect Chime Volume:
  • Verify the chime module connections.
  • Adjust the potentiometer on the AX-GMCL2-SWC module to set the desired chime volume.
• Dimmer Control Issues:
  • Check the dimmer wire connection between the interface and the aftermarket radio.
  • Ensure the aftermarket radio's dimmer settings are correctly configured.
• Vehicle System Malfunctions (e.g., Speedometer erratic, vehicle not starting):
  • Immediately disconnect the interface and revert to factory wiring if possible.
  • These symptoms indicate a serious wiring error or module malfunction. Seek professional assistance.
• مشاكل تحديث البرامج الثابتة:
  • Ensure you are using the correct and latest PC software from Axxess.
  • Use a reliable USB cable and ensure stable power to the module during updates.

If problems persist after following these steps, contact Axxess technical support for further assistance.

تحديد

الضمان والدعم

معلومات الضمان

For detailed warranty information regarding the Axxess AX-GMCL2-SWC Data Interface, please refer to the documentation included with your purchase or visit the official Axxess website. Warranty terms and conditions are subject to change by the manufacturer.

الدعم الفني

If you require technical assistance or have questions not covered in this manual, please contact Axxess technical support directly. Contact information can typically be found on the manufacturer's official webالموقع أو في عبوة المنتج.