مقدمة
شكرا لك على الشراءasing the SHARP Handy Ultrasonic Washer UW-A1-S. This portable ultrasonic device is designed to effectively remove various stains from fabrics using high-frequency vibrations. Please read this manual thoroughly before use to ensure proper operation, maintenance, and to maximize the lifespan of your device.
المنتج انتهىview
This image shows the SHARP Handy Ultrasonic Washer UW-A1-S in its upright, cylindrical form, highlighting its sleek silver finish and compact design.
This image displays the ultrasonic washer with its protective cap removed, revealing the specialized head responsible for generating ultrasonic vibrations for stain removal.
This image illustrates the ultrasonic washer being used on a white shirt, demonstrating the process of applying the device directly to a stained area to loosen dirt particles.
احتياطات السلامة
- لا تغمر الوحدة الرئيسية في الماء.
- يحفظ بعيدًا عن متناول الأطفال.
- لا تقم بتفكيك الجهاز أو تعديله.
- استخدم فقط كابل الشحن والمحول المقدمين.
- Avoid direct contact with the ultrasonic head when the device is operating, as it may become warm.
- Do not use on delicate fabrics without testing on an inconspicuous area first.
يثبت
شحن الجهاز
The SHARP UW-A1-S comes with a rechargeable NiMH battery. Before first use, fully charge the device.
- Connect the provided USB power cord to the charging port on the device.
- Plug the other end of the USB cable into a compatible USB wall adapter (included) or a powered USB port.
- The power button will illuminate to indicate charging status. Refer to the indicator light section for details.
- تستغرق عملية الشحن الكاملة عادةً حوالي [Insert Charging Time if available, otherwise omit].
التحضير الأولي
- تأكد من أن الجهاز مشحون بالكامل.
- Prepare a small basin or container with clean water. For best results, use lukewarm water.
- For stubborn stains, a small amount of laundry detergent can be added to the water or applied directly to the stain.
This image displays the accessories that come with the ultrasonic washer, including the charging stand, a travel sponge for spot soaking, and the USB charging cable with its wall adapter.
تعليمات التشغيل
- Prepare the Stain: Place the stained area of the fabric over a flat, non-absorbent surface, such as the bottom of a basin or a clean, hard surface. Ensure the fabric is slightly damp or wet the stained area with water. For optimal results, apply a small amount of liquid laundry detergent directly to the stain.
- قم بتنشيط الجهاز: Press and hold the power button for approximately 3 seconds until the indicator light glows white, indicating the device is active.
- Apply to Stain: Gently press the ultrasonic head of the device onto the wet, stained area. You will observe small bubbles forming around the head, which signifies the ultrasonic vibrations are working.
- Move the Device: Slowly move the ultrasonic head over the entire stained area in small, circular motions or back and forth. The ultrasonic vibrations will help to dislodge dirt and grime from the fabric fibers.
- مراقبة التقدم: Continue until the stain visibly fades or disappears. For stubborn stains, repeat the process or allow the detergent to soak for a few minutes before re-applying the device.
- Rinse and Wash: After treating the stain, rinse the fabric thoroughly with clean water. For best results, follow up with a normal laundry wash cycle.
- Deactivate Device: Press and hold the power button again for 3 seconds to turn off the device. The indicator light will turn off.
Tips for Effective Stain Removal
- Treat stains as soon as possible for the best outcome.
- Always test on an inconspicuous area of the fabric first to ensure colorfastness and fabric compatibility.
- For dried-on stains, pre-soak the fabric in water with detergent before using the ultrasonic washer.
- The device works best when the fabric is wet and there is a small amount of water or detergent to facilitate the ultrasonic waves.
صيانة
تنظيف الجهاز
- After each use, wipe the ultrasonic head and the body of the device with a soft, damp قطعة قماش لإزالة أي بقايا.
- Do not use abrasive cleaners or solvents, as these can damage the device's surface.
- تأكد من أن الجهاز جاف تمامًا قبل تخزينه أو شحنه.
تخزين
- قم بتخزين الجهاز في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- Keep the protective cap on the ultrasonic head when not in use to prevent damage.
- في حالة التخزين لفترة طويلة، تأكد من شحن البطارية جزئيًا (حوالي 50٪) لإطالة عمر البطارية.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الجهاز لا يعمل. | نفدت طاقة البطارية. لم يتم الضغط على زر الطاقة لفترة كافية. | اشحن الجهاز بالكامل. اضغط مع الاستمرار على زر الطاقة لمدة 3 ثوانٍ. |
| No bubbles or weak vibration. | Insufficient water/detergent. Device not making proper contact with fabric. البطارية منخفضة. | Ensure fabric is wet and apply detergent. Press the ultrasonic head firmly onto the fabric. اشحن الجهاز. |
| Stain not removed. | Stain type is not suitable for ultrasonic cleaning. Stain is old/set. Insufficient treatment time. | Some stains (e.g., permanent ink) may not be removable. Pre-soak stubborn stains. Increase treatment time or repeat the process. |
| يسخن الجهاز أثناء الاستخدام. | التشغيل العادي للاستخدام المطول. | This is normal. If it becomes excessively hot, turn off the device and allow it to cool down. |
تحديد
- نموذج: UW-A1-S
- الشركة المصنعة: حاد
- مصدر الطاقة: بطارية NiMH قابلة لإعادة الشحن (متضمنة)
- المجلدtage: 4.8 فولت
- أبعاد: 1.57 × 1.57 × 6.61 بوصة (تقريبًا)
- وزن: 8.1 أونصة (تقريبًا)
- لون: فضي
- مادة: معدن
- المميزات الخاصة: محمول
الضمان والدعم
Please note that this product is a Japan Import and may not come with a manufacturer's warranty valid outside of Japan. For any support inquiries or issues, please contact your original point of purchase or the seller directly.
For additional information or to explore other Sharp products, visit the official متجر Sharp على أمازون.
