VONETS VAP11G-500 Industrial Wireless Repeater/Bridge User Manual

1. انتهى المنتجview

The VONETS VAP11G-500 is an industrial-grade wireless device designed for various networking applications. It functions as a WiFi repeater, AP client, bridge, booster, and extender, offering 300Mbps high-speed transmission and strong coverage. This device is suitable for challenging environments such as elevators, factories, and farms, facilitating video transmission and long-range WiFi coverage projects.

Image 1.1: The VONETS VAP11G-500 device with its integrated USB power and RJ45 Ethernet cables.

المميزات الرئيسية:

• Professional Intelligent WiFi repeater/extender/bridge, signal booster/ampمكبر.
• High-power mode transmission distance: up to 200 meters (without obstacles and for small data); Video transmission: less than 50 meters.
• Suitable for use in elevators, factories, farms, and similar environments for video transmission or long-range WiFi coverage projects.
• Easy three-step setup process.
• Supports WPA-PSK/WPA2-PSK, 64/128/WEP security mechanisms.
• Supports 2.4Ghz, 802.11b/g/n wireless transmission protocol, 300Mbps high-speed transmission.
• حجم الإدخالtage: DC5V-15V, designed to reduce electronic waste by not requiring a special power source.

2. محتويات العبوة

يرجى التأكد من تضمين جميع العناصر المذكورة أدناه في طردك. في حال وجود أي عناصر مفقودة أو تالفة، يُرجى التواصل مع خدمة العملاء.

• VONETS VAP11G-500 Industrial Wireless Repeater/Bridge device (with integrated USB power and RJ45 Ethernet cables)
• هوائي
• دليل المستخدم (هذا المستند)

3. المواصفات

Image 3.1: The compact size of the VAP11G-500, shown next to a bank card for scale.

4. الإعداد والتكوين

The VAP11G-500 can be configured via a computer or a smartphone. Ensure the device is powered correctly before starting the configuration process.

4.1 تشغيل الجهاز

1. Connect the USB power cable of the VAP11G-500 to a 5V/2A power source (e.g., a computer USB port or a USB power adapter).
2. Observe the LED indicator on the device. It should flash normally, indicating it is powered on.

4.2 Configuration via Computer

1. Connect the VAP11G-500's RJ45 Ethernet cable to your computer's Ethernet port.
2. افتح web المتصفح على جهاز الكمبيوتر الخاص بك.
3. In the address bar, enter the configured domain http://vonets.cfg or the IP address 192.168.254.254 واضغط على Enter.
4. When prompted, enter the User ID and password. Both are typically "مسؤل". Click "Login".
5. Navigate to the "Scan Hotspots" section. The device will search for available WiFi networks.
6. Select the desired WiFi hotspot from the list and click "Next".
7. Enter the password for the selected WiFi hotspot.
8. Click "Apply" and then "Reboot". The device will reboot, which may take about 1 minute. Wait until the LED light flashes normally.
9. Once rebooted, the device should be connected to the internet. You can verify by opening a webالموقع في متصفحك.

4.3 Configuration via Smartphone

1. Ensure the VAP11G-500 is powered on.
2. On your smartphone, go to WiFi settings and search for available networks.
3. Find the WiFi network (SSID) of the VAP11G-500. The SSID typically starts with "VONETS_2.4G_XXXX" where XXXX corresponds to the last four digits of the device's MAC address (found on the back of the device).
4. Connect to this network. The default password is "12345678".
5. افتح web browser on your smartphone.
6. في شريط العناوين، أدخل http://vonets.cfg or 192.168.254.254 واضغط على Enter.
7. Enter the User ID and password, both typically "مسؤل". Click "Login".
8. Navigate to the "Scan Hotspots" section.
9. Select the desired WiFi hotspot from the list and click "Next".
10. Enter the password for the selected WiFi hotspot.
11. Click "Apply" and then "Reboot". The device will reboot.
12. After reboot, reconnect your smartphone to the VAP11G-500's configured WiFi network (the SSID will be the same as the source WiFi SSID, e.g., H3C_VONETS_2.4G_30). The password will be the same as the source WiFi hotspot's password.
13. You can now enjoy WiFi Internet.

5. أوضاع التشغيل

The VAP11G-500 supports multiple operating modes to suit various networking needs:

• مكرر WiFi: Extends the range of an existing WiFi network.
• AP Client: Connects a wired device to a wireless network.
• كوبري: Connects two wired networks wirelessly or extends a wireless network to a wired device.
• Booster/Extender: Enhances WiFi signal strength and coverage.

Image 5.1: Diagram illustrating the high-power WiFi bridge/repeater functionality with a range of up to 200 meters.

Image 5.2: Application of VAP11G-500 in WiFi Bridge mode, connecting a network camera to a router and monitoring display.

Image 5.3: Wireless monitoring application connection diagram (Case 1), showing multiple cameras connected via a switch to the VAP11G-500 for extended range.

Image 5.4: Application diagram demonstrating how two VAP11G-500 devices can extend network coverage between two buildings (House 1 and House 2) to a control center.

6. الصيانة

• قم بتخزين الجهاز في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• تجنب تعريض الجهاز للماء أو الرطوبة.
• Clean the device regularly with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• تأكد من التهوية المناسبة لمنع ارتفاع درجة الحرارة.
• تحقق بشكل دوري من وجود تحديثات للبرامج الثابتة على جهاز الشركة المصنعة webالموقع لضمان الأداء والأمان الأمثل.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your VAP11G-500, refer to the following common troubleshooting steps:

• لا يوجد طاقة/مصابيح LED مطفأة:
  • Ensure the USB power cable is securely connected to a 5V/2A power source.
  • جرب منفذ USB أو محول طاقة مختلفًا.
• لا يمكن الوصول إلى صفحة الإعدادات:
  • Verify that your computer or smartphone is directly connected to the VAP11G-500 via Ethernet (for computer) or its default WiFi SSID (for smartphone).
  • Confirm that you are entering the correct domain (http://vonets.cfg) or IP address (192.168.254.254).
  • تأكد من ضبط محول الشبكة الخاص بجهاز الكمبيوتر الخاص بك للحصول على عنوان IP تلقائيًا (DHCP).
  • حاول مسح ذاكرة التخزين المؤقت للمتصفح الخاص بك أو استخدام متصفح آخر.
• No Internet Connection After Configuration:
  • Double-check the WiFi hotspot password entered during configuration. A single incorrect character will prevent connection.
  • Ensure the source WiFi hotspot is active and providing internet access.
  • Reboot both the VAP11G-500 and your main router.
  • Verify that the VAP11G-500's operating mode (e.g., Repeater, Bridge) is correctly set for your network topology.
• إشارة ضعيفة/سرعة بطيئة:
  • Relocate the VAP11G-500 closer to your main router or the area requiring extended coverage.
  • Minimize obstacles (walls, large metal objects) between the VAP11G-500 and the source WiFi.
  • Check for interference from other 2.4GHz devices (e.g., cordless phones, microwaves).
• Device Not Responding (Hard Reset):
  • If the device becomes unresponsive, you may need to perform a factory reset. Refer to the full product manual or manufacturer's website for specific instructions on how to perform a hard reset, as this will revert all settings to default.

8. الضمان والدعم

For warranty information, technical support, or further assistance, please contact Vonets customer service. Details can typically be found on the product packaging or the official Vonets webموقع.

الشركة المصنعة: Shenzhen Houtian Network Communication Technology Co.,Ltd

Webموقع: www.vonets.com