1. المقدمة
This user manual provides comprehensive instructions for the safe and efficient operation of the Showtec Compact Par 7 Q4 7 x 3W RGBW LED Floor PAR Spot. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent damage to the unit or injury to personnel.
The Showtec Compact Par 7 Q4 is a compact RGBW PAR can designed for various lighting applications, offering versatile color mixing and robust performance.
2. تعليمات السلامة
اتبع دائمًا احتياطات السلامة التالية لتقليل خطر الصدمة الكهربائية أو الحريق أو الإصابة:
- تأكد من حجم امدادات الطاقةtage يطابق المجلدtagه المحدد في الوحدة.
- قم دائمًا بتوصيل الوحدة بمأخذ كهربائي مؤرض.
- لا تقم بتشغيل الجهاز إذا كان سلك الطاقة تالفًا.
- افصل الجهاز عن مصدر الطاقة الرئيسي قبل التنظيف أو الصيانة.
- لا تعرض الوحدة للمطر أو الرطوبة.
- Maintain adequate ventilation around the unit to prevent overheating.
- تجنب تعرض العين المباشر لمصدر الضوء.
- هذه الوحدة مخصصة للاستخدام الداخلي فقط.
3. انتهى المنتجview
The Showtec Compact Par 7 Q4 features seven 3W RGBW LEDs, providing a wide spectrum of colors. Its compact design makes it suitable for floor standing or truss mounting.
الشكل 3.1: الجبهة view of the Showtec Compact Par 7 Q4 with red light output, showcasing its seven powerful RGBW LEDs.
Figure 3.2: The PAR spot emitting a bright white light, demonstrating its full spectrum capabilities.
Figure 3.3: The PAR spot displaying a vibrant blue light, highlighting its color mixing versatility.
الشكل 3.4: الصورة عن قرب view of the LED array when the unit is off, showing the individual lenses.
الشكل 3.5: خلفي view of the unit, showing the power input and DMX connections (XLR 3-pin).
الشكل 3.6: بزاوية view of the PAR spot, demonstrating the adjustable mounting bracket for floor or truss applications.
4. الإعداد
4.1 فك التعبئة
Carefully unpack the unit and check for any damage during transit. Retain the packaging material for future transport or storage.
4.2 التركيب
The Compact Par 7 Q4 can be used as a floor spot or mounted to a truss using the integrated bracket. Ensure the mounting surface or truss can support the weight of the fixture. Use appropriate clamps and safety cables when mounting overhead.
4.3 توصيل الطاقة
Connect the power cable to the unit's power input and then to a grounded electrical outlet. Verify that the local voltagيتوافق مع متطلبات الوحدة (240 فولت).
4.4 وصلة DMX (اختياري)
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the fixture. If connecting multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the next.
5. التشغيل
5.1 لوحة التحكم
The unit features a digital display and control buttons (Menu, Up, Down, Enter) on the rear for setting modes and DMX addresses.
أوضاع التشغيل 5.2
The Showtec Compact Par 7 Q4 typically offers several operating modes:
- وضع DMX: Allows control via an external DMX controller. Set the DMX address using the control panel.
- نظام آلي: عروض ضوئية مبرمجة مسبقاً تعمل تلقائياً.
- وضع الصوت النشط: The light reacts to sound via a built-in microphone.
- الوضع الرئيسي / العبد: Link multiple units where one acts as the master and others as slaves, synchronizing their operation.
- وضع اللون الثابت: حدد لونًا ثابتًا واحدًا واعرضه.
5.3 مخطط قناة DMX
Refer to the specific DMX channel chart in the full product manual for detailed information on controlling each function via DMX. Common channels include Dimmer, Red, Green, Blue, White, Strobe, and Program selection.
6. الصيانة
6.1 التنظيف
Regular cleaning of the lenses and housing is recommended to maintain optimal light output and extend the unit's lifespan. Use a soft, lint-free cloth and a mild glass cleaner. Do not use abrasive materials.
6.2 استبدال الصمامات
If the unit does not power on, check the fuse located near the power input. Replace it with a fuse of the same type and rating only.
6.3 التخزين
When not in use, store the unit in its original packaging or a suitable flight case in a dry, dust-free environment.
7. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الوحدة لا تعمل | No power supply; Blown fuse; Damaged power cable | Check power connection; Replace fuse; Replace cable |
| لا تحكم DMX | Incorrect DMX address; Faulty DMX cable; DMX controller issue | Verify DMX address; Check/replace DMX cable; Test controller |
| Lights flicker or behave erratically | Poor DMX signal; Overheating; Internal fault | Check DMX connections; Ensure proper ventilation; Contact support |
| الألوان غير صحيحة | Incorrect DMX channel values; Internal calibration issue | Adjust DMX values; Perform factory reset if available; Contact support |
8. المواصفات
| ميزة | التفاصيل |
|---|---|
| ماركة | شوتك |
| نموذج | Q4 |
| رقم المرجع | LIG0013729-000 |
| مصدر الضوء | 7 × 3 واط RGBW المصابيح |
| قوة | 3 Watts (per LED) |
| المجلدtage | 240 فولت |
| مصدر الطاقة | الكابلات الكهربائية |
| الأبعاد (الطول × العرض × الارتفاع) | 31.5 × 31 × 15.5 سم |
| وزن | 2.73 كيلوغرام |
| ASIN | B01F04U758 |
9. الضمان والدعم
Information regarding specific warranty terms and conditions for the Showtec Compact Par 7 Q4 is not available in the provided product details. Please refer to the retailer or manufacturer's official webموقع للحصول على أحدث معلومات الضمان.
For technical support, service, or spare parts inquiries, please contact your authorized Showtec dealer or the manufacturer directly. Always provide the model number (Q4) and reference number (LIG0013729-000) when seeking support.
