جهاز قياس الأراضي بنظام تحديد المواقع العالمي (GPS) من نويفا NF-178: دليل المستخدم

1. المقدمة

The Noyafa NF-178 is a versatile GPS land measuring instrument designed for accurate area and distance calculations. It features a 2.8-inch display and supports both manual and automatic measurement methods, making it suitable for various outdoor land surveying tasks.

Figure 1: Noyafa NF-178 GPS Land Measuring Instrument. This image displays the device with its screen showing GPS coordinates and date, set against a background of fields and mountains, indicating its outdoor use.

المميزات الرئيسية:

• 2.8-inch 320 x 240 display for clear data visualization.
• Measures any shape of land area and girth (excluding upland and slope).
• Capable of testing length or distance between any two points.
• Displays test data, graphic trajectory, and total calculation amount on screen.
• Supports both manual and automatic measurement methods.
• Multiple unit options: mu, square, hectare, and kilometers.

2. Safety Precautions and Important Notes

To ensure accurate measurements and safe operation, please observe the following guidelines:

• الاستخدام الخارجي: This device is designed for outdoor use in open areas. Avoid operating near tall obstructions such as buildings or dense trees, as these can interfere with GPS signal reception.
• الحصول على بيانات الأقمار الصناعية: The device requires a minimum of 6 satellites to be acquired before it can begin measurement operations. Ensure sufficient satellite lock for accurate results.
• Minimum Measurement Area: Do not attempt to measure land areas smaller than 0.3 mu (approximately 200 square meters), as accuracy may be compromised.
• Measurement Trajectory: When measuring, avoid crossing or overlapping your trajectory. Maintain a clear, non-intersecting path for precise area calculation.
• Coordinate Stability: Before initiating any measurement, verify that the Latitude and Longitude coordinates displayed on the device are stable. Unstable coordinates indicate poor GPS signal and will lead to inaccurate readings.

3. انتهى المنتجview

Familiarize yourself with the components and controls of your Noyafa NF-178 instrument.

Figure 2: Labeled components of the Noyafa NF-178. This diagram highlights the LCD screen, signal strength indicator, backlight button, LED light, length button, up/down navigation, OK/Enter button, Save button, Power button, Back button, charging port, and laser.

تحديد المكون:

• شاشة LCD: Displays measurement data, coordinates, and menu options.
• مؤشر قوة الإشارة: Shows the current GPS signal reception quality.
• زر الإضاءة الخلفية: Activates or deactivates the screen backlight.
• ضوء LED: يوفر الإضاءة.
• Length Button: Initiates distance measurement.
• Area Button: Initiates area measurement.
• Up/Down Navigation Buttons: Used for menu navigation and value adjustment.
• Enter/OK Button: يؤكد التحديدات أو الإجراءات.
• زر حفظ: يحفظ بيانات القياس.
• زر الطاقة: يقوم بتشغيل الجهاز أو إيقاف تشغيله.
• زر الرجوع: للعودة إلى القائمة أو الشاشة السابقة.
• منفذ الشحن: لتوصيل كابل الشحن USB.
• الليزر: Integrated laser for specific measurement tasks.
• Money Detection Light: (If applicable, based on image label)

4. الإعداد

4.1. تركيب البطارية وشحنها

The Noyafa NF-178 comes with a pre-installed 3.7V/1000mAh lithium battery. Ensure the battery is properly seated before first use.

Figure 3: Battery compartment and USB charging port. This image illustrates the internal 3.7V/1000mAh lithium battery and the common USB charging port, highlighting the device's power solution.

• الشحن: Connect the device to a standard USB power adapter using a common USB charging cable. The device supports multiple charging modes.
• عمر البطارية: A fully charged battery provides extended operation for outdoor measurements.

4.2. التشغيل الأولي

اضغط مع الاستمرار على قوة button until the screen illuminates. The device will perform a self-check and attempt to acquire GPS satellite signals.

5. تعليمات التشغيل

5.1. Manual Area Measurement

Follow these steps for manual area measurement:

1. Acquire Satellites: Ensure the device has acquired at least 6 satellite signals. The signal strength indicator on the screen will confirm this.
2. Enter Manual Testing Mode:
   • Navigate to the "Set" menu.
   • Select "Manual Testing".
   • العودة إلى القائمة الرئيسية.
3. Start Area Measurement: From the main menu, select "Area" to begin.
4. نقاط مارك:
   • Walk along the perimeter of the land you wish to measure.
   • اضغط على يحفظ button at each corner or significant point (e.g., A, B, C, D).
   • The device will record the GPS coordinates for each point.
5. Complete Measurement: After marking all points, return to the starting point (Point A). Press the OK button to finalize the measurement.
6. View نتائج: The calculated area and length will be displayed on the screen.
7. حفظ البيانات: اضغط على يحفظ button to store the measurement data.

Figure 4: Manual testing procedure. This graphic illustrates the four steps for manual area measurement: satellite acquisition, entering manual testing mode, marking points (A, B, C, D), and viewing the final area and length results on the device screen.

The land graph can also be checked later from the saved data.

5.2. قياس المسافة

To measure the distance between two points:

1. From the main menu, select "Length".
2. Walk from the starting point to the end point.
3. The device will continuously display the distance covered.
4. يضعط يحفظ to record the final distance.

5.3. إعدادات النظام

لتخصيص إعدادات الجهاز:

1. Navigate to the "Set" menu.
2. استخدم أعلى/أسفل buttons to select options such as:
   • Area Unit Set: Choose between mu, square, hectare, etc.
   • Length Unit Set: Choose between kilometers, meters, etc.
   • Area Unit Price Set: (If applicable) Set a price per unit of area for automatic calculation.
3. يضعط أدخل/موافق لتأكيد اختيارك.
4. استخدم أعلى/أسفل buttons to adjust the value, then press أدخل/موافق للحفظ.

Figure 5: System settings interface. This image shows examples of the "Area unit set" and "Area unit price set" screens, demonstrating how users can customize measurement units and pricing within the device's settings.

5.4. إدارة البيانات

• حفظ البيانات: بعد كل قياس، اضغط على يحفظ button to store the results.
• Viewالتاريخ: Access saved measurements and graphic trajectories through the "History Data" option in the menu.
• Total Calculation: The device can display the total amount of calculation for accumulated measurements.

6. الصيانة

• تنظيف: استخدم قطعة قماش ناعمة وجافة لتنظيف الجهاز. لا تستخدم منظفات أو مذيبات كاشطة.
• تخزين: قم بتخزين الجهاز في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• العناية بالبطارية: If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan. Recharge periodically.
• تجنب التأثير: احمِ الجهاز من السقوط والصدمات، التي قد تتلف المكونات الداخلية أو الشاشة.

7. استكشاف الأخطاء وإصلاحها

• لا يوجد إشارة GPS:
  • Ensure you are in an open outdoor area, away from tall buildings or dense foliage.
  • Wait for the device to acquire at least 6 satellites. This may take a few minutes.
• قياسات غير دقيقة:
  • Verify that the GPS coordinates are stable before starting measurement.
  • Ensure your measurement trajectory does not cross or overlap.
  • Confirm the area being measured is not smaller than 0.3 mu.
• الجهاز لا يعمل:
  • Check battery charge level. Connect to a charger and attempt to power on again.
  • تأكد من تركيب البطارية بشكل صحيح.
• الشاشة لا تستجيب:
  • حاول إعادة تشغيل الجهاز بالضغط مع الاستمرار على زر الطاقة.
  • إذا استمرت المشكلة ، فاتصل بدعم العملاء.

8. المواصفات

Figure 6: Contents of the Noyafa NF-178 package. This image shows the retail box, the NF-178 device, a user manual, and a protective carrying pouch, indicating the items included with the product.

9. الضمان والدعم

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Noyafa customer service directly. Contact details are typically available on the manufacturer's official webموقع.