TOPAZ LP38/14/850/FL/D LED Flood Light User Manual

المنتج انتهىview

The TOPAZ LP38/14/850/FL/D is a 14-watt dimmable LED PAR38 flood light designed for various applications, including commercial lighting and hospitals. It provides 1060 lumens of bright daylight white light (5000K) and features a 40-degree beam angle. This energy-efficient bulb has an E26 medium base and an average lifespan of 35,000 hours.

Figure 1: The Topaz LP38/14/850/FL/D LED Flood Light, showing its PAR38 shape and E26 medium screw base.

Figure 2: The retail packaging for the Topaz LP38/14/850/FL/D Dimmable LED Flood Light, highlighting its brightness of 1,060 lumens and estimated energy cost.

معلومات السلامة

يرجى قراءة جميع تعليمات السلامة قبل تركيب أو استخدام هذا المنتج. قد يؤدي عدم اتباع هذه التعليمات إلى صدمة كهربائية أو حريق أو مخاطر أخرى.

• Ensure power is turned off at the circuit breaker before installation, removal, or inspection.
• This product is designed for use with 120V AC circuits.
• لا تقم بفك أو تعديل المصباح. لا يحتوي على أي أجزاء قابلة للصيانة.
• مناسب لـ دamp locations. Do not expose directly to water.
• This bulb is dimmable. Ensure compatibility with your dimmer switch. Incompatible dimmers may cause flickering or damage to the bulb.
• Do not use with emergency exit fixtures or emergency lights.
• Avoid looking directly into the LED light source when illuminated.

الإعداد والتثبيت

1. إيقاف تشغيل الطاقة: Locate the circuit breaker controlling the light fixture and turn off the power. Verify that the power is off by attempting to turn on the light switch.
2. قم بإزالة المصباح القديم (إن وجد): قم بفك المصباح الموجود من مكانه بحرص. اتركه ليبرد إذا كان قد تم استخدامه مؤخراً.
3. تركيب المصباح الجديد: Screw the TOPAZ LP38/14/850/FL/D LED Flood Light into the E26 medium base socket. Ensure it is securely tightened, but do not overtighten.
4. اعادة الطاقة: قم بإعادة تشغيل الطاقة من قاطع الدائرة.
5. وظيفة الاختبار: Turn on the light switch to confirm the bulb illuminates.

ملحوظة: For dimming functionality, ensure your dimmer switch is compatible with LED bulbs. Consult the dimmer manufacturer's instructions for specific compatibility information.

تعليمات التشغيل

This LED flood light operates like a standard incandescent bulb once installed. It is designed for simple on/off operation and dimming capabilities.

• تشغيل/إيقاف: Use your existing wall switch to turn the light on or off.
• يعتم: If connected to a compatible dimmer switch, adjust the dimmer control to achieve the desired light intensity. The bulb is designed to dim smoothly without flickering.

صيانة

The TOPAZ LP38/14/850/FL/D LED Flood Light requires minimal maintenance due to its long lifespan and durable construction.

• تنظيف: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
• الاستبدال: Replace the bulb only when it reaches the end of its operational life.
• تصرف: Dispose of the bulb according to local regulations for electronic waste.

استكشاف الأخطاء وإصلاحها

تحديد

الضمان والدعم

For warranty information or technical support, please contact Topaz customer service. Refer to the product packaging or the official Topaz webالموقع للحصول على تفاصيل الاتصال وشروط الضمان الحالية.

الشركة المصنعة: توباز

رقم القطعة: 78486

رمز المنتج العالمي: 751338098367

أول تاريخ متاح: 1 ديسمبر 2015