دليل مستخدم مقعد بيديه دائري من لوتس ATS-800

1. المقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of your Lotus ATS-800 Round Bidet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

الصورة 1.1: من أعلى إلى أسفل view of the Lotus ATS-800 Round Bidet Seat with its control panel.

2. معلومات السلامة

Observe the following safety precautions to reduce the risk of electric shock, fire, injury, or property damage.

• المتطلبات الكهربائية: The unit requires a 120V GFCI (Ground Fault Circuit Interrupter) outlet. Ensure your electrical outlet meets this specification.
• قوة: The bidet operates at 120 volts and consumes 660 watts.
• تثبيت: Installation must comply with all local plumbing and electrical codes. If you are unsure, consult a qualified professional.
• ضغط الماء: Ensure water pressure is within acceptable limits for bidet operation.
• أطفال: قم بالإشراف على الأطفال للتأكد من أنهم لا يلعبون بالجهاز.
• تنظيف: Disconnect power before cleaning the unit. Do not immerse the unit in water.
• شهادة: This product is cUL certified, ensuring compliance with safety standards.

3. محتويات العبوة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

• Lotus ATS-800 Round Bidet Seat Unit
• T-Valve for water connection
• خرطوم إمداد المياه
• لوحة التركيب
• مسامير وصواميل التثبيت
• دليل المستخدم (هذا المستند)

4. التثبيت

The Lotus ATS-800 is designed for easy DIY installation. All necessary installation parts are included. Follow these general steps:

1. تحضير المرحاض: أغلق مصدر المياه إلى المرحاض واسحب السيفون لتفريغ الخزان. ثم انزع غطاء المرحاض الموجود.
2. Install T-Valve: Disconnect the toilet's water supply hose from the fill valve. Install the T-valve between the fill valve and the water supply hose.
3. تصاعد لوحة: Secure the mounting plate onto the toilet bowl using the provided bolts and washers.
4. تركيب مقعد بيديه: Slide the bidet seat onto the mounting plate until it clicks into place.
5. قم بتوصيل خرطوم الماء: Connect one end of the bidet's water supply hose to the T-valve and the other end to the bidet unit.
6. استعادة المياه والطاقة: Turn on the water supply to the toilet. Check for leaks. Plug the bidet into a 120V GFCI outlet.

Image 4.1: Diagram illustrating the measurement differences between round and elongated toilet seats for proper bidet fit. The ATS-800 is designed for round toilets, typically 19.4 inches or less from the seat bolts to the front rim.

Image 4.2: The Lotus ATS-800 Bidet Seat shown installed on a toilet within a contemporary bathroom setting.

5. التشغيل

The Lotus ATS-800 offers various functions for enhanced hygiene and comfort. Refer to the control panel for specific button layouts.

Image 5.1: Close-up of the bidet's control panel, displaying buttons for various wash modes, temperature settings, and other functions.

5.1. Wash Functions

• الغسيل الخلفي: Provides a standard posterior cleansing.
• الغسول الأنثوي: Offers a gentler, dedicated wash for feminine hygiene.
• Turbo Wash: A stronger wash setting for thorough cleansing.
• موضع الفوهة: Adjust the nozzle's position (5 levels) for optimal cleansing.
• ضغط الماء: Adjust water pressure (5 levels) to your preference.
• درجة حرارة الماء: Select from 3 heated water temperature settings.

5.2. ميزات الراحة

• مقعد ساخن: Enjoy a warm seat with 3 adjustable temperature settings.
• مجفف الهواء الدافئ: A warm air dryer with 5 temperature settings helps reduce toilet paper usage.
• Soft Closing Seat: The seat and cover close gently, preventing slamming.

5.3. توفير الطاقة

• وضع توفير الطاقة: Activates to reduce electricity consumption when the bidet is not in active use.

6. الصيانة

Regular maintenance ensures the longevity and hygienic operation of your bidet seat.

6.1. تنظيف الفوهة

The bidet features a self-cleaning nozzle, which automatically rinses before and after each use. The nozzle is fully encased in stainless steel for improved hygiene and durability.

الصورة 6.1: عن قرب view of the bidet's self-cleaning nozzle, showing water spraying for cleansing. The nozzle tip is designed for easy replacement.

6.2 تنظيف بشكل عام

To clean the exterior of the bidet seat:

1. افصل الوحدة عن المخرج الكهربائي.
2. مسح الأسطح بمادة ناعمة، دamp قطعة قماش ومنظف خفيف وغير كاشط.
3. Do not use harsh chemicals, abrasive pads, or spray water directly onto the unit.
4. تأكد من أن الوحدة جافة تمامًا قبل توصيلها مرة أخرى بالكهرباء.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your Lotus ATS-800, refer to the following common problems and solutions:

If these steps do not resolve the issue, please contact Lotus customer support for assistance.

8. المواصفات

9. الضمان والدعم

Your Lotus ATS-800 Bidet Seat is covered by a ضمان الشركة المصنعة لمدة سنة واحدةيغطي هذا الضمان عيوب المواد والصناعة في ظل الاستخدام العادي.

For warranty claims, technical support, or any questions not addressed in this manual, please contact Lotus Hygiene Systems directly. Refer to the product packaging or the official Lotus webالموقع للحصول على معلومات الاتصال الحالية.