مقدمة
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your LUXOR FP4000 Adjustable-Height Large-Capacity LCD TV Stand. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
The LUXOR FP4000 is designed to accommodate large flat-panel TVs from 40" to 80", supporting up to 200 lbs. It features adjustable viewing heights, an integrated cable management system, a convenient accessory shelf, and mobile casters with locking brakes for versatile display solutions.
معلومات السلامة
- تأكد من وجود جميع المكونات وعدم تعرضها للتلف قبل التجميع.
- Do not exceed the maximum weight capacity of 200 lbs for the TV mount and 25 lbs for the accessory shelf.
- Always use two or more people for assembly and moving the stand with a TV mounted.
- تأكد من إحكام ربط جميع البراغي قبل الاستخدام. لا تفرط في إحكام الربط.
- Engage the locking brakes on all casters when the stand is in a stationary position.
- أبقِ الأطفال والحيوانات الأليفة بعيدًا عن منطقة التجمع.
- تخلص من مواد التغليف بطريقة مسؤولة.
محتويات الحزمة
Please verify that all parts are included in your package. If any parts are missing or damaged, contact Luxor customer support.
- Base Assembly with Casters
- Vertical Support Columns (2)
- حامل تثبيت التلفزيون
- رف ملحق
- Hardware Kit (screws, washers, tools)
- دليل التعليمات
الصورة: أكثر منview of the LUXOR FP4000 Adjustable-Height Large-Capacity LCD TV Stand, showing its main components including the base, vertical columns, TV mount, and accessory shelf.
الإعداد والتجميع
اتبع هذه الخطوات بعناية لضمان التركيب الصحيح. يُنصح بوجود شخصين على الأقل لإتمام عملية التركيب.
Step 1: Attach Vertical Support Columns to Base
- Place the base assembly on a flat, stable surface.
- Align the vertical support columns with the mounting points on the base.
- Secure the columns using the provided screws and tools. Ensure they are firmly attached.
الصورة: أ view of the TV stand during assembly, showing the vertical support columns being attached to the mobile base. This image highlights the structural connection points.
Step 2: Install TV Mounting Bracket
- Attach the TV mounting bracket to the top of the vertical support columns.
- Use the designated screws and ensure the bracket is level and secure.
- Refer to your TV's manual for specific VESA mounting patterns and screw sizes.
Image: The TV stand with the mounting bracket installed at the top of the vertical columns, ready to receive a television. This shows the upper part of the stand.
Step 3: Attach Accessory Shelf
- Position the accessory shelf at your desired height on the vertical support columns.
- Secure the shelf using the provided hardware. Ensure it is level and stable.
Image: The LUXOR FP4000 TV Stand with the accessory shelf attached to the vertical columns, positioned below the TV mounting bracket. This illustrates the shelf's placement.
Step 4: Mount the Television
- Carefully lift your television and align its VESA mounting holes with the bracket on the stand.
- Secure the TV to the bracket using the appropriate screws and spacers from the hardware kit.
- Ensure the TV is securely fastened and level before releasinشخص سخيف.
Image: A fully assembled LUXOR FP4000 TV Stand, viewed from the front, with a television mounted on its bracket and the accessory shelf in place. This shows the complete product.
تعليمات التشغيل
ضبط ارتفاع التلفزيون
The TV mounting bracket can be adjusted in 2-inch increments from 48" to 65" (measured from the floor to the center of the TV). To adjust the height:
- With two people, carefully lift the TV slightly to relieve pressure on the locking pins.
- Locate the height adjustment pins on the vertical columns.
- Pull out the pins, adjust the TV to the desired height, and re-insert the pins securely into the corresponding holes.
- Ensure both sides are adjusted to the same height and pins are fully engaged before releasinز التلفزيون.
نقل الحامل
The stand is equipped with four 3" full-swivel casters for mobility.
- To move the stand, ensure all caster brakes are disengaged.
- Push the stand carefully to its new location. Avoid sudden movements or pushing over uneven surfaces.
- Once in the desired position, engage the locking brakes on all four casters to secure the stand.
إدارة الكابلات
Utilize the integrated cable management system within the steel columns to keep cables organized and out of sight. Route TV and accessory cables through the designated openings in the columns for a clean and professional appearance.
صيانة
- تنظيف: مسح الأسطح بمادة ناعمة، دamp القماش. تجنب استخدام المنظفات أو المذيبات الكاشطة.
- فحص الأجهزة: افحص جميع البراغي والصواميل دوريًا للتأكد من إحكام ربطها. أعد ربطها إذا لزم الأمر.
- فحص العجلات: Inspect casters for debris or damage. Clean as needed to ensure smooth operation.
- حدود الوزن: Always adhere to the specified weight limits for the TV and accessory shelf.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الحامل متذبذب أو غير مستقر. | مسامير فضفاضة أو سطح غير مستو. | Check and tighten all assembly screws. Move stand to a level surface. Ensure caster brakes are engaged. |
| لا تتحرك العجلات بسلاسة. | Debris in casters or engaged brakes. | Clear any debris from the caster wheels. Ensure all caster brakes are disengaged. |
| TV height adjustment is difficult. | Weight on pins or pins misaligned. | Ensure two people are lifting the TV slightly to relieve pressure. Verify pins are correctly aligned with holes. |
| Accessory shelf is not level. | التثبيت غير السليم. | Re-install the accessory shelf, ensuring it is properly seated and secured at both attachment points. |
تحديد
- نموذج: FP4000
- ماركة: الأقصر
- مادة: سبائك الفولاذ
- لون: أسود
- أحجام التلفزيون المتوافقة: أجهزة تلفزيون مسطحة من 40 إلى 80 بوصة
- الحد الأقصى لوزن التلفزيون: 200 رطل
- أبعاد الحامل: 39.25"W x 28.25"D x 48" to 65"H (adjustable in 2" increments)
- Accessory Shelf Dimensions: 19.625 بوصة عرض × 11 بوصة عمق
- Accessory Shelf Weight Capacity: 25 رطل
- عجلات: Four 3" full-swivel casters, all with locking brakes
- نوع التركيب: قابل للتعديل
- رمز المنتج العالمي: 847210034896
Image: The LUXOR FP4000 TV Stand, illustrating its overall dimensions and key features. This image provides a visual reference for the product's size and design.
الضمان والدعم
For warranty information, technical support, or to order replacement parts, please contact Luxor customer service. Refer to the official Luxor webللحصول على أحدث معلومات الاتصال وسياسات الضمان، يرجى زيارة الموقع الإلكتروني.
Luxor Customer Service: Visit Luxor Contact Us Page
Please have your model number (FP4000) and purchase date available when contacting support.
