1. المقدمة
Thank you for choosing the Aqualux Pool Blaster Max Li. This cordless electric vacuum cleaner is designed for efficient and convenient cleaning of pools and spas. Its powerful suction and battery operation allow for thorough cleaning without the need for hoses or external power sources. Please read this manual carefully before operating the device to ensure proper use and maintenance.
2. معلومات السلامة
- Always disconnect the charger from the unit before use or maintenance.
- Do not operate the vacuum out of water. The motor is designed for underwater use and requires water for cooling.
- أبعد يديك وشعرك وملابسك الفضفاضة عن الأجزاء المتحركة.
- Do not allow children to operate this device. Adult supervision is required.
- Use only the charger supplied with the unit.
- قم بتخزين الوحدة في مكان بارد وجاف عند عدم استخدامها.
- Do not attempt to open or repair the battery pack or motor housing. Refer all servicing to qualified personnel.
3. محتويات العبوة
تأكد من وجود جميع العناصر في العبوة:
- Pool Blaster Max Li Vacuum Unit
- Rechargeable Lithium-Ion Battery (integrated)
- شاحن البطارية
- Reusable Filter Bag
- Adjustable Wide Head
- Pole Adapter (for standard telescopic poles)
4. انتهى المنتجview
Familiarize yourself with the main components of your Pool Blaster Max Li.
Figure 4.1: The Aqualux Pool Blaster Max Li cordless vacuum cleaner, showing its ergonomic design and attachment points.
The unit consists of the main body housing the motor and battery, a removable filter bag compartment, and an adjustable wide head for efficient debris collection. The charging port is located on the main body.
5. الإعداد والشحن
5.1. شحن البطارية
Before first use, fully charge the battery. The charging port is designed for secure connection.
Figure 5.1: Detail of the charging port on the vacuum unit.
Figure 5.2: Connecting the charger to the Pool Blaster Max Li. Ensure a firm connection.
- Locate the charging port on the vacuum unit.
- Connect the charger cable to the port.
- قم بتوصيل الشاحن بمأخذ كهربائي قياسي.
- Allow 8-10 hours for a full charge. The indicator light on the charger will change when charging is complete (refer to charger instructions for specific light behavior).
5.2. التجميع
- Insert the reusable filter bag into its designated compartment. Ensure it is securely seated.
- Attach the adjustable wide head to the front of the vacuum unit. It should click into place.
- If using with a telescopic pole, attach the pole adapter to the vacuum unit, then slide your standard telescopic pole into the adapter.
6. التشغيل
The Pool Blaster Max Li is designed for easy underwater operation.
Figure 6.1: The vacuum unit submerged and actively cleaning the pool floor.
Figure 6.2: The vacuum effectively collecting various debris from the pool bottom.
Figure 6.3: The vacuum in operation, demonstrating the water flow and suction capability.
- تأكد من شحن البطارية بالكامل.
- Submerge the vacuum unit completely in the water. Ensure no air is trapped inside.
- Turn on the unit using the power switch (location may vary, typically near the handle).
- Slowly guide the vacuum across the pool or spa surfaces you wish to clean. Overlap passes to ensure complete coverage.
- The vacuum will collect debris into the filter bag. Monitor the suction power; if it decreases, the filter bag may need emptying.
- After cleaning, turn off the unit before removing it from the water.
- Remove the unit from the water and immediately proceed to maintenance.
7. الصيانة
Regular maintenance ensures optimal performance and extends the life of your Pool Blaster Max Li.
7.1. Cleaning the Filter Bag
The filter bag should be cleaned after each use or when suction power diminishes.
- Remove the filter bag from the vacuum unit.
- Empty collected debris into a waste receptacle.
- Rinse the filter bag thoroughly with a garden hose or under a faucet until clean.
- Allow the filter bag to air dry completely before storing or reinserting.
7.2. Unit Cleaning and Storage
- Rinse the exterior of the vacuum unit with fresh water after each use.
- Wipe down the unit with a soft cloth.
- Ensure the unit is completely dry before charging or storing.
- قم بتخزين المكنسة الكهربائية في مكان بارد وجاف، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- Recharge the battery regularly, even during periods of non-use, to maintain battery health.
8. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يتم تشغيل الفراغ. | البطارية ليست مشحونة. | اشحن البطارية لمدة 8-10 ساعات. |
| مفتاح الطاقة مغلق. | تأكد من أن مفتاح الطاقة في وضع التشغيل. | |
| قوة شفط منخفضة. | Filter bag is full or clogged. | Empty and clean the filter bag thoroughly. |
| Debris lodged in suction intake. | Turn off the unit and remove any obstructions from the intake. | |
| شحن البطارية منخفض. | شحن البطارية. | |
| Unit stops during operation. | نفدت طاقة البطارية. | شحن البطارية. |
| تم تفعيل الحماية من الحرارة الزائدة. | Turn off the unit, remove from water, and allow it to cool down for 30 minutes before restarting. Ensure it is fully submerged during operation. |
9. المواصفات الفنية
- نموذج: ن4382
- ماركة: أكوالوكس
- مصدر الطاقة: تعمل بالبطارية
- نوع البطارية: ليثيوم أيون
- حجم البطاريةtage: 18 فولت
- وقت التشغيل: Up to 1 hour (on full charge)
- وقت إعادة الشحن: 8-10 ساعات
- Cleaning Surface Area: Approximately 164.5 m³/h
- وزن السلعة: 3.2 كيلوغرام
- الأبعاد (الطول × العرض × الارتفاع): 45.97 سم × 27.18 سم × 20.57 سم
- Suction Head Width: 27.3 سم
- عمق المياه الأدنى: 40 سم
- مادة: بلاستيك
- لون: أزرق
- رمز المنتج العالمي: 894331001016
10. الضمان ودعم العملاء
For warranty information or customer support, please refer to the documentation provided with your purchase or contact Aqualux customer service through their official webالموقع الإلكتروني أو المتاجر المعتمدة. احتفظ بإثبات الشراء لأي مطالبات تتعلق بالضمان.
