مقدمة
This manual provides essential instructions for the Generac 0J93230SSM Maintenance Kit, designed to facilitate routine upkeep for Generac 20kW to 22kW generators. Regular maintenance using genuine Generac parts is crucial for ensuring the longevity and reliable performance of your generator. This kit includes all necessary components for a standard service interval.
The kit contains genuine OEM Generac parts, specifically chosen to fit Generac engine models requiring this part number.
مكونات المجموعة أكثر منview
The Generac 0J93230SSM Maintenance Kit includes the following items:
- Two (2) Quarts of SAE 5W-30 Full Synthetic Engine Oil
- One (1) Air Filter
- One (1) Oil Filter (Part #: 070185E)
- Two (2) Spark Plugs
- One (1) Service Sticker




إجراءات الصيانة
Regular maintenance is vital for the optimal performance and longevity of your Generac generator. Always refer to your generator's specific owner's manual for detailed safety precautions and procedures.
1. تغيير زيت المحرك
The kit includes two quarts of SAE 5W-30 full synthetic engine oil. This oil is formulated for optimal performance in various temperatures.
- تأكد من إيقاف تشغيل المولد وتبريده.
- Locate the oil drain plug and place a suitable container underneath to collect used oil.
- Remove the drain plug and the oil fill cap/dipstick. Allow all old oil to drain completely.
- قم باستبدال سدادة التصريف بشكل آمن.
- Carefully pour the new SAE 5W-30 synthetic engine oil into the oil fill opening. Refer to your generator's manual for the exact oil capacity.
- Check the oil level with the dipstick, ensuring it is within the recommended range.
- استبدل غطاء تعبئة الزيت/مقياس الزيت.
2. Oil Filter Replacement
The kit includes one Generac oil filter (Part #: 070185E).
- After draining the old engine oil, locate the oil filter.
- Use an oil filter wrench to loosen and remove the old oil filter. Be prepared for some oil spillage.
- ضع طبقة رقيقة من زيت المحرك الجديد على الحشية المطاطية لفلتر الزيت الجديد.
- Screw on the new oil filter by hand until the gasket makes contact with the engine block. Then, tighten an additional 1/2 to 3/4 turn. Do not overtighten.
- After refilling the engine oil, run the generator for a few minutes and check for leaks around the oil filter.
3. استبدال فلتر الهواء
The kit includes one air filter. A clean air filter ensures proper engine breathing and prevents contaminants from entering the engine.
- Locate the air filter housing on your generator.
- افتح المساكن عن طريق الإفراجasing the clips or screws.
- Remove the old air filter. Note its orientation.
- قم بتنظيف أي حطام من داخل غلاف فلتر الهواء.
- Insert the new air filter, ensuring it is seated correctly.
- أغلق غطاء فلتر الهواء وأحكم إغلاقه.
4. استبدال شمعة الإشعال
The kit includes two spark plugs. Replacing spark plugs ensures efficient ignition and optimal engine performance.
- Ensure the generator is off and cooled. Disconnect the spark plug wires.
- Use a spark plug wrench to carefully remove the old spark plugs.
- Inspect the new spark plugs for correct gap (refer to your generator's manual for specifications). Adjust if necessary.
- قم بربط شمعات الإشعال الجديدة في رأس الأسطوانة يدويًا لمنع تلف السن اللولبي.
- Tighten with a spark plug wrench. Do not overtighten; typically, a quarter to half turn after hand-tight is sufficient.
- Reconnect the spark plug wires firmly.
5. Service Sticker
Use the included service sticker to record the date and hours of this maintenance service. This helps track future maintenance intervals.
فيديوهات المنتج
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | جينيراك |
| اسم الموديل | 0J93230SSM |
| موصى به لـ | Generac 20kW-22kW Generators |
| المكونات المضمنة | 2 Quarts of 5W-30 Synthetic Motor Oil, 1 Air Filter, 1 Oil Filter, 2 Spark Plugs, 1 Service Sticker |
| وزن العنصر | 2.76 رطل (تقريبًا) |
| أبعاد المنتج | 27.94 x 27.94 x 27.94 inches (approx. package dimensions) |
| مادة | Plastic (for some components) |
| ميزة خاصة | Maintenance kit, Tune up kit |
الضمان والدعم
For specific warranty information regarding the Generac 0J93230SSM Maintenance Kit or its individual components, please refer to the documentation included with your purchase or visit the official Generac webموقع.
For technical support, troubleshooting assistance, or to locate authorized service centers, please contact Generac customer service directly or consult your generator's owner's manual.





