مقدمة
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
محتويات الحزمة
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- حامل الماسح الضوئي
- (USB) Connection Cable (sold separately or included depending on package)
- التوثيق (هذا الدليل)
Note: The connection cable is required for operation and may be sold separately.
يثبت
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- فك حزمة الماسح الضوئي: Carefully remove the scanner and its stand from the packaging.
- تجميع الحامل: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- قم بتوصيل الكابل: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- تشغيل الطاقة: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- تثبيت برنامج التشغيل (إذا لزم الأمر): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
تعليمات التشغيل
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
المسح الضوئي باليد
- Pick Up the Scanner: Remove the scanner from its stand.
- الهدف والمسح: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- تأكيد المسح الضوئي: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- مكان العنصر: Position the barcode of the item in front of the scanner's window while it is in its stand.
- الكشف التلقائي: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- تأكيد المسح الضوئي: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
صيانة
تضمن الصيانة المناسبة طول عمر الماسح الضوئي الخاص بك وأدائه الأمثل.
- تنظيف: استخدم قطعة قماش ناعمة وخالية من الوبر وامسحها برفق.ampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- تخزين: عند عدم الاستخدام، قم بتخزين الماسح الضوئي في بيئة نظيفة وجافة، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- العناية بالكابلات: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
استكشاف الأخطاء وإصلاحها
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الماسح الضوئي لا يعمل. | كابل USB غير موصول أو به عطل. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port or cable. |
| الماسح الضوئي لا يقرأ الباركود. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| تظهر البيانات الممسوحة ضوئياً بشكل غير صحيح. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| يصدر الماسح الضوئي صوت تنبيه ولكن لا يتم إرسال أي بيانات. | التطبيق غير مُفعّل أو وضع واجهة المستخدم غير صحيح. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic webموقع.
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | HD3130-BK |
| نوع الماسح الضوئي | 1D ماسح الباركود |
| معدل المسح | 270 مسح/ثانية |
| تكنولوجيا الاتصال | كابل يو اس بي |
| مصدر الطاقة | كهرباء سلكية (عبر USB) |
| الأجهزة المتوافقة | سطح المكتب، الكمبيوتر المحمول |
| وزن العنصر | 1.28 رطل (حوالي 0.58 كجم) |
| أبعاد المنتج | 7.5 × 8.8 × 4.1 بوصة (حوالي 19.05 × 22.35 × 10.41 سم) |
| الشركة المصنعة | داتالوجيك |
| رقم تعريف التجارة العالمية (GTIN) | 05054629213858 |
الضمان والدعم
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic webموقع.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
الموارد المتاحة على الإنترنت: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Webموقع.
