AMS F5962

دليل مستخدم ساعة الحائط اللاسلكية AMS F5962

الموديل: F5962

1. المقدمة

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. انتهى المنتجview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

الشكل 1: الجبهة view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. محتويات العبوة

يرجى التحقق من محتويات الطرد عند فتحه. تأكد من وجود جميع العناصر وأنها سليمة.

4. الإعداد

4.1 تركيب البطارية

  1. حدد مكان حجرة البطارية على الجزء الخلفي من الساعة.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. أغلق غطاء حجرة البطارية جيدًا.

مهم: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 مزامنة الوقت الأولية

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Place the clock near a window or in an open area, away from electronic devices that may cause interference.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

ملحوظة: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 تركيب الساعة

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. تعليمات التشغيل

Once set up, the AMS F5962 operates automatically.

6. الصيانة

6.1 التنظيف

لتنظيف الساعة، امسح سطحها برفق بقطعة قماش ناعمة وجافة. تجنب استخدام المنظفات الكاشطة أو المذيبات أو البخاخات الكيميائية، لأنها قد تُتلف الطلاء أو المكونات الداخلية.

6.2 استبدال البطارية

عندما تتوقف عقارب الساعة عن الحركة أو يصبح الوقت غير دقيق، فمن المحتمل أن يكون الوقت قد حان لاستبدال البطارية.

  1. قم بإزالة البطارية القديمة من الحجرة.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

ملاحظة بيئية: Please dispose of used batteries responsibly according to local regulations.

7. استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
عقارب الساعة لا تتحرك ولا تتوقف.بطارية فارغة.استبدل البطارية بأخرى جديدة.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • التداخل من الأجهزة الإلكترونية الأخرى.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • تأكد من أن البطارية جديدة.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. المواصفات

ماركةأ.م.س
رقم الموديلف5962
نوع العرضتماثلي
ميزة خاصةRadio-Controlled Time Synchronization
مادةمعدن مطلى
لونBeige (dial), Brown (housing)
أسلوبعتيق
أبعاد المنتج35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
وزن العنصر1.22 كجم
مصدر الطاقةتعمل بالبطارية
الاستخدام الداخلي والخارجيداخلي

9. الضمان والدعم

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS webالموقع للحصول على مزيد من المساعدة.

المستندات ذات الصلة - ف5962

قبلview دليل مستخدم ساعة AMS 5898 / 5893 التي تعمل بالتحكم اللاسلكي
تعليمات مفصلة لإعداد وتشغيل الساعات التي يتم التحكم فيها لاسلكيًا AMS 5898 و AMS 5893، بما في ذلك ضبط الوقت ووظائف الإنذار وعرض درجة الحرارة والصيانة.
قبلview تعليمات تشغيل ساعة الحائط من AMS
تعليمات تشغيل ساعات الحائط من AMS، تغطي تركيب البطارية واستبدالها والاستخدام العام بلغات متعددة.
قبلview دليل مجموعة تقييم لوحة محول ams AS5600L
يوفر هذا الدليل معلومات شاملة عن لوحة محول ams AS5600L-WL_EK_AB، بما في ذلك محتويات المجموعة، ووصف اللوحة، وتعليمات التركيب، وتفاصيل توصيل الدبابيس، وتشغيل وضع I2C، ومخططات الأجهزة، وتصميم لوحة الدوائر المطبوعة، ومعلومات الطلب.
قبلview دليل مستخدم مستشعر موضع الدوران 14 بت AS5048 ams
يقدم دليل المستخدم هذا معلومات مفصلة عن مستشعر موضع الدوران ams AS5048، وهو مستشعر زاوية رقمي بدقة 14 بت ومخرج PWM. يغطي الدليل لوحة محول AS5048، وطريقة التركيب، وتوصيل الدبابيس، وحالات التشغيل (SPI، وDaisy Chain)، وترميز البرامج الثابتة.ampالملفات ومخططات الأجهزة. ضرورية للمهندسين الذين يدمجون هذا المستشعر في أنظمتهم.
قبلview دليل تقييم مجموعة أدوات لوحة محول ams AS5048
يُفصّل هذا الدليل لوحة محول ams AS5048 (AS5048-EK-AB)، وهي مجموعة تقييم لمستشعر تحديد المواقع المغناطيسي AS5048. ويغطي الدليل المكونات المادية، وأنماط التشغيل (SPI، I2C)، والبرمجيات.amples، ومعلومات الاتصال الخاصة بشركة ams AG.
قبلview تعليمات تشغيل ساعة AMS ودليل استبدال البطارية
تعليمات تشغيل واستبدال البطارية في ساعات نظام التوقيت الآسيوي، مع إرشادات متعددة اللغات.