دليل مستخدم جهاز Verifone MX915 متعدد المسارات

1. المقدمة

This manual provides essential information for the safe and efficient operation of your Verifone MX915 Multi Lane Terminal. Please read this manual thoroughly before using the device and retain it for future reference.

The Verifone MX915 is a PCI 3.X compliant terminal designed for multi-lane retail environments, featuring a secure chip card reader (SC), touch screen (TCH), Ethernet connectivity, and contactless payment capabilities (CTLS).

2. معلومات السلامة

• Do not expose the terminal to extreme temperatures, humidity, or direct sunlight.
• تجنب إسقاط الجهاز أو تعريضه لصدمة شديدة.
• Only use accessories and power supplies approved by Verifone.
• Do not attempt to open or modify the terminal. This will void the warranty and could compromise security.
• تأكد من التهوية المناسبة حول الجهاز أثناء التشغيل.
• افصل الطاقة قبل التنظيف.

3. محتويات العبوة

Carefully unpack the box and verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

• Verifone MX915 Multi Lane Terminal
• قلم
• Mounting Bracket (optional, may vary by package)
• Cables (Ethernet, USB, etc. - Note: Power supply and certain cables may not be included and must be acquired separately.)

الشكل 3.1: Contents of the Verifone MX915 package, including the terminal, stylus, various cables, and a mounting bracket. Please note that specific accessories may vary.

الشكل 3.2: عن قرب view of the mounting bracket and additional cables that may be included or required for the Verifone MX915 terminal setup.

4. الإعداد

4.1 Connecting the Terminal

1. Connect I/O Module: The Verifone MX915 requires an I/O module for connectivity. Connect the appropriate cable from the terminal to the I/O module.
2. توصيل الطاقة: Connect the power supply (not included) to the I/O module, then plug the power supply into a suitable electrical outlet.
3. ربط الشبكة: For Ethernet connectivity, connect an Ethernet cable from your network router or switch to the RJ-45 port on the I/O module.
4. التثبيت الآمن (اختياري): If using a mounting bracket, securely attach the terminal to the bracket according to the bracket's instructions.

الشكل 4.1: أمام view of the Verifone MX915 terminal, showing the display screen, integrated keypad, and stylus.

4.2 التمهيد الأولي

Once power is connected, the terminal will automatically begin its boot-up sequence. This process may take a few moments. The display will show the Verifone logo and system information as it initializes.

الشكل 4.2: The Verifone MX915 display during initial boot-up, showing the Verifone branding and indicating its Linux-based operating system.

Note: Key injection is required to accept debit or credit card payments. This process is typically performed by your payment processor or a certified technician.

5. تعليمات التشغيل

The Verifone MX915 operates primarily through its touch screen and integrated keypad. Specific transaction flows will depend on the payment application loaded onto the device by your payment processor.

5.1 استخدام شاشة اللمس

• Use your finger or the provided stylus to interact with the touch screen.
• Tap to select options or buttons.
• Follow on-screen prompts for transaction processing.

5.2 استخدام لوحة المفاتيح

• The keypad is used for entering PINs, amounts, or other numerical data.
• The green button typically confirms an entry.
• The red button typically cancels an entry or transaction.
• The yellow button typically corrects the last entered digit.

5.3 Accepting Payments

• بطاقة الشريحة (EMV): Insert the chip card into the slot at the bottom of the terminal with the chip facing up. Leave the card in until prompted to remove it.
• بدون تلامس (تقنية الاتصال قريب المدى): Tap the contactless card or mobile device near the contactless logo on the terminal's display. Wait for the confirmation beep or visual cue.
• الشريط المغناطيسي: Swipe the card through the magnetic stripe reader on the side of the terminal.

6. الصيانة

6.1 تنظيف الجهاز

• Disconnect the terminal from power before cleaning.
• استخدم قطعة قماش ناعمة وخالية من الوبر وامسحها برفق.ampاغسلها بالماء أو بمنظف خفيف غير كاشط.
• Do not spray cleaners directly onto the terminal.
• Avoid using solvents, harsh chemicals, or abrasive materials.
• Clean the screen and keypad regularly to ensure optimal performance and hygiene.

6.2 تحديثات البرامج

Software updates are typically managed by your payment processor or IT department. Do not attempt to update the firmware or software independently unless instructed by a certified professional.

7. استكشاف الأخطاء وإصلاحها

For issues not listed here, or if solutions do not resolve the problem, please contact your technical support provider.

8. المواصفات

الشكل 8.1: Product label on the back of the Verifone MX915, displaying model information, PCI compliance details, FCC ID, and manufacturing origin.

9. الضمان والدعم

9.1 معلومات الضمان

Verifone products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Verifone webللاطلاع على شروط وأحكام الضمان المفصلة، ​​يُرجى الاحتفاظ بإيصال الشراء لتقديم مطالبات الضمان.

9.2 الدعم الفني

For technical assistance, troubleshooting beyond this manual, or service requests, please contact your payment processor or the authorized Verifone reseller from whom you purchased the device. They are equipped to provide specific support for your terminal's configuration and payment application.

You may also visit the official Verifone support portal for general product information and resources: www.verifone.com/support