ADTRAN NetVanta 3140 Router User Manual

مقدمة

This manual provides essential information for the installation, operation, and maintenance of the ADTRAN NetVanta 3140 Router. The NetVanta 3140 is a fixed-port, high-performance Ethernet router designed to support converged access and high-quality Voice services. It features three routed, autosensing Gigabit Ethernet interfaces, making it suitable for enterprise-class Internet access and secure corporate connectivity.

معلومات السلامة

Always observe basic safety precautions to reduce the risk of fire, electric shock, and injury to persons, including the following:

• اقرأ كافة التعليمات بعناية قبل تشغيل الجهاز.
• لا تعرض الجهاز للمطر أو الرطوبة.
• لا تفتح الجهازasinز. إحالة جميع أعمال الصيانة إلى فنيي صيانة مؤهلين.
• تأكد من التهوية المناسبة حول الجهاز.
• استخدم فقط محول الطاقة المرفق مع الجهاز.

محتويات الحزمة

تأكد من أن الحزمة الخاصة بك تحتوي على العناصر التالية:

• ADTRAN NetVanta 3140 Router (Model: 1700341F1)
• محول الطاقة
• الوثائق (دليل البدء السريع، معلومات الضمان)

Note: Rack-mounting hardware may be sold separately.

انتهى الماديview

The ADTRAN NetVanta 3140 features various ports and indicators on its front and rear panels. Familiarize yourself with these components before installation.

Figure 1: Front Panel of NetVanta 3140 Router
This image displays the front panel of the ADTRAN NetVanta 3140 router. From left to right, it shows status LEDs (STAT, USB), three Gigabit Ethernet ports labeled GIG 0/1, GIG 0/2, and GIG 0/3, two USB ports, and a CONSOLE port (DB9 serial connector). The ADTRAN logo is visible on the left, and "NetVanta 3140" is printed on the right.

مكونات اللوحة الأمامية:

• STAT LED: يشير إلى حالة النظام.
• يو اس بي ال اي دي: Indicates USB activity.
• GIG 0/1, GIG 0/2, GIG 0/3 Ports: Three autosensing Gigabit Ethernet interfaces for network connections.
• منافذ USB: لتوصيل أجهزة USB المتوافقة.
• منفذ وحدة التحكم: A DB9 serial port for local management and configuration via a terminal emulator.

يثبت

1. تحديد مستوى

Place the NetVanta 3140 on a flat, stable surface or install it in a standard 19-inch equipment rack (rack-mounting hardware not included). Ensure adequate ventilation and avoid placing the device near heat sources or in direct sunlight.

2. توصيل الطاقة

1. Connect the provided power adapter to the power input on the rear panel of the router.
2. قم بتوصيل الطرف الآخر من محول الطاقة بمأخذ كهربائي مناسب.
3. The device will power on automatically. Observe the STAT LED for boot-up sequence.

3. اتصالات الشبكة

1. Connect your Internet service provider's (ISP) modem or network uplink to one of the Gigabit Ethernet ports (e.g., GIG 0/1).
2. Connect your local area network (LAN) devices (e.g., computers, switches) to the remaining Gigabit Ethernet ports.
3. تأكد من توصيل جميع كابلات الإيثرنت بشكل آمن.

4. Initial Configuration (Console Access)

For initial configuration or advanced management, connect a computer to the CONSOLE port using a serial cable (DB9). Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings:

• معدل باود: 9600
• بتات البيانات: 8
• التكافؤ: لا أحد
• نقطة التوقف: 1
• التحكم في التدفق: لا أحد

Refer to the ADTRAN OS documentation for detailed command-line interface (CLI) configuration instructions.

تعليمات التشغيل

System Boot-up

Upon power-on, the router will perform a self-test and load the ADTRAN OS. The STAT LED will blink during this process and become solid green once the system is operational.

مؤشرات LED

عمليات الشبكة الأساسية

Once configured, the NetVanta 3140 will route traffic between its Gigabit Ethernet interfaces according to its configuration. It supports features such as Quality of Service (QoS) for prioritizing traffic and Voice over IP (VoIP) readiness for voice services.

صيانة

تحديثات البرامج الثابتة

التحقق بشكل دوري من دعم ADTRAN website for firmware updates. Keeping the router's firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package carefully.

تنظيف

To clean the device, power it off and disconnect the power adapter. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners, as they may damage the device.

الاعتبارات البيئية

Ensure the operating environment remains within specified temperature and humidity ranges to prevent damage and ensure reliable operation.

استكشاف الأخطاء وإصلاحها

لا يوجد طاقة

• Verify the power adapter is securely connected to both the router and a working electrical outlet.
• تأكد من أن منفذ الطاقة يعمل عن طريق توصيل جهاز آخر.
• Ensure the power adapter is the correct one supplied with the device.

لا يوجد اتصال بالشبكة

• Check the Ethernet cable connections to the GIG ports. Ensure they are firmly seated.
• Observe the GIG port LEDs. If they are off, there might be no link. Try a different cable or port.
• Verify the configuration of the router using the console port.
• Restart the router and connected network devices.

Console Access Issues

• Ensure the serial cable is correctly connected to the CONSOLE port and your computer.
• Verify the terminal emulation software settings (baud rate, data bits, parity, stop bits, flow control) match the recommended settings.
• Check if the correct COM port is selected in your terminal software.

تحديد

الضمان والدعم

معلومات الضمان

ADTRAN products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official ADTRAN webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.

الدعم الفني

For technical assistance, product documentation, or firmware downloads, please visit the official ADTRAN support portal. You can typically find support resources, FAQs, and contact information for technical support there.

ADTRAN Official Webموقع: www.adtran.com