1. المقدمة
This manual provides essential information for the proper installation, operation, and maintenance of the Urmet DOMUS 201082/20 2-Wire Power Supply. This unit is designed for use with Urmet 2GO video intercom systems, facilitating power supply and data distribution.
يرجى قراءة هذا الدليل جيداً قبل التثبيت والاستخدام لضمان التشغيل الآمن والفعال.
2. معلومات السلامة
تحذير: Electrical installation should only be performed by qualified personnel in accordance with local electrical codes and regulations.
- افصل الطاقة دائمًا قبل إجراء أي عملية تركيب أو صيانة أو استكشاف أعطال.
- Install the power supply in a dry location, protected from weather influences, moisture, and direct sunlight.
- تأكد من التهوية المناسبة حول الوحدة لمنع ارتفاع درجة الحرارة.
- لا تفتح الوحدة جasinز. لا توجد أجزاء قابلة للصيانة من قبل المستخدم بالداخل.
- تأكد من أن حجم العرضtage matches the specifications of the device (230 V AC).
3. انتهى المنتجview
The Urmet DOMUS 201082/20 is a dedicated power supply unit for the 2GO system. It provides system power and distributes data across multiple terminals.
Figure 1: Urmet DOMUS 201082/20 Power Supply and Packaging.
This image displays the Urmet DOMUS 201082/20 2-wire power supply unit, a grey rectangular device with multiple terminal blocks and a red DIP switch, alongside its blue and white Urmet branded packaging box. The box indicates 'ALIMENTATORE 2 FILI' (2-WIRE POWER SUPPLY) and the model number '201082/20'. The power supply unit itself shows input/output specifications and connection points.
المميزات الرئيسية:
- Power supply for the 2GO system.
- Data distribution on 5 pairs of terminals.
- Supports connection of up to 5 bus lines.
- Provides power to indoor units, video distributors, and outdoor units in video or intercom installations.
- Suitable for DIN rail or wall mounting.
4. التثبيت (الإعداد)
4.1 التركيب
The power supply unit can be mounted in two ways:
- تركيب السكك الحديدية DIN: Snap the unit onto a standard DIN rail.
- التثبيت على الحائط: Secure the unit to a wall using appropriate screws and plugs (not supplied). Ensure the mounting surface is stable and suitable for the unit's weight.
Always install the unit in a dry, protected environment, away from direct weather exposure.
4.2 توصيلات الأسلاك
Refer to the wiring diagram on the unit and the 2GO system documentation for specific connection details. The unit features terminals for:
- مدخلات الطاقة: Connect 230 V AC ± 10% 50 Hz to the designated input terminals.
- Bus Lines (LINE0-LINE4): Connect up to 5 bus lines for data and power distribution to indoor and outdoor units. The back rails are functionally identical, allowing flexible connections.
- VPE 0-1: Specific connections for video distribution.
Ensure all connections are secure and correctly polarized. Incorrect wiring can damage the unit or connected devices.
4.3 تكوين مفتاح DIP
The unit includes a DIP switch for configuration. As indicated on the unit, any unused terminals (or corresponding switches) MUST BE SET TO ON. Consult the 2GO system installation manual for detailed configuration requirements based on your specific system setup.
5. التشغيل
Once properly installed and configured, the Urmet DOMUS 201082/20 power supply operates automatically. It provides the necessary power and data signals to the connected 2GO system components. No user interaction is typically required during normal operation.
The unit's status indicators (if present, refer to unit markings) provide visual feedback on its operational state.
6. الصيانة
The Urmet DOMUS 201082/20 power supply is designed for maintenance-free operation. To ensure longevity and reliable performance:
- حافظ على نظافة الجهاز وخلوه من الغبار. استخدم قطعة قماش ناعمة وجافة للتنظيف.
- Ensure the installation environment remains dry and within the specified operating temperature and humidity ranges.
- قم بفحص جميع توصيلات الأسلاك بشكل دوري للتأكد من إحكامها ووجود علامات التآكل.
Do not use liquid cleaners or solvents on the unit.
7. استكشاف الأخطاء وإصلاحها
If the 2GO system or connected components are not functioning correctly, consider the following troubleshooting steps:
- لا يوجد طاقة:
- Check the main power supply to the unit.
- Verify all power input connections are secure.
- عطل في النظام:
- Inspect all bus line connections for proper seating and integrity.
- Review the DIP switch configuration against the 2GO system manual to ensure correct settings.
- Ensure all unused DIP switches are set to ON as per the unit's instructions.
- Consult the specific troubleshooting guide for your 2GO indoor/outdoor units.
If problems persist, contact a qualified technician or Urmet support for assistance.
8. المواصفات
| المعلمة | قيمة |
|---|---|
| نموذج | 201082/20 |
| حجم الإدخالtage | 230 فولت تيار متردد ± 10% |
| تكرار | 50 هرتز |
| استهلاك الطاقة | 71 فولت أمبير |
| Output Line Voltage | 28 فولت تيار مستمر |
| تيار الخرج | 1 A + 0.8 A (internal) |
| درجة حرارة التشغيل | -5 درجة مئوية إلى +45 درجة مئوية |
| رطوبة | 95% max at 30 °C |
| التركيب | DIN rail or Wall mount |
9. الضمان والدعم
For warranty information, please refer to the documentation provided at the time of purchase or contact your authorized Urmet dealer. Technical support can be obtained through your installer or by contacting Urmet customer service directly.
احتفظ بإيصال الشراء الخاص بك كدليل على الشراء في حالة مطالبات الضمان.
