Powell Twin Over Full Pewter Bunk Bed Instruction Manual

تحذيرات السلامة

WARNING: To help prevent serious or fatal injuries from entrapment or falls:

• Never allow a child under 6 years old on the upper bunk.
• استخدم دائمًا المرتبة ذات الحجم الموصى به أو دعامة المرتبة ، أو كليهما ، للمساعدة في منع احتمالية الانزلاق أو السقوط.
• Use only a mattress which is 74"-75" long and 37-1/2"-38-1/2" wide on the upper bunk, 74"-75" long and 53-1/2"-54-1/2" wide on the lower bunk.
• Ensure thickness of mattress does not exceed 8" and surface of mattress is at least 5" below upper edge of guardrails.
• استخدم دائمًا حواجز الحماية على كلا الجانبين الطويل للسرير العلوي.
• If bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
• Prohibit horseplay on or under bed(s) and prohibit jumping on the bed.
• منع أكثر من شخص في الطابق العلوي.
• Use ladder for entering and leaving upper bunk.
• Maximum total weight is not to exceed 300 lbs. on the upper bunk.
• تحقق دوريًا وتأكد من أن الدرابزين والسلم والمكونات الأخرى في وضعها الصحيح ، وخالية من التلف ، وأن جميع الموصلات مشدودة.
• Do not use substitute parts. Replacement parts, including additional guardrails, may be obtained from our customer service department.
• Use of water or sleep flotation mattresses is prohibited.
• قد يوفر استخدام الضوء الليلي احتياطات أمان إضافية لطفل يستخدم السرير العلوي.
• اتبع المعلومات الخاصة بالتحذيرات التي تظهر على الهيكل العلوي للطابقين وعلى الكرتون.
• احتفظ بهذه التعليمات للرجوع إليها في المستقبل.

STRANGULATION HAZARD: Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for example ، على سبيل المثال لا الحصر ، الخطافات والأحزمة وحبال القفز.

انتهى السلامةview فيديو

يوفر هذا الفيديو عرضًا مرئيًاview of the bunk bed and highlights key safety considerations. It demonstrates the bed's structure and features from various angles, reinforcing the importance of proper setup and adherence to safety guidelines.

قائمة الأجزاء

قبل التجميع، تأكد من وجود جميع الأجزاء وسلامتها. راجع الرسم التخطيطي أدناه للتعرف عليها.

Image showing the side profile of the Powell Twin Over Full Pewter Bunk Bed, illustrating the upper and lower bunk frames and the integrated ladder. This view helps in identifying the main structural components.

For a detailed visual breakdown of parts, please refer to the assembly video below, specifically the segment from 0:13 to 0:19.

• Left End Frame
• Right End Frame
• Upper Guardrail (Long)
• Upper Guardrail (Short)
• Upper Bed Base
• Lower Bed Base
• سُلُّم
• Support Legs (for lower bed base)

قائمة الأجهزة:

تعليمات التجميع

اتبع هذه الخطوات بعناية لضمان التركيب الصحيح. يُنصح بوجود شخصين بالغين لإتمام عملية التركيب.

دليل فيديو التجميع

This video provides a step-by-step visual guide for assembling the Powell Twin Over Full Pewter Bunk Bed, demonstrating each connection and hardware usage.

Step 1: Attach Bed Bases to End Frames

Connect the upper bed base (5) and lower bed base (6) to the left end frame (1) and right end frame (2). Use 16 sets of Bolt (C), Spring Washer (G), and Flat Washer (E) for these connections. Ensure all connections are finger-tight at this stage.

Diagram illustrating the attachment of the upper and lower bed bases to the main end frames using specified bolts and washers. This forms the primary structure of the bunk bed.

Step 2: Install Support Legs for Lower Bed Base

Attach the two support legs (8) to the center of the lower bed base (6). Secure these with 2 sets of Bolt (B), Spring Washer (H), and Flat Washer (F).

Image showing the installation of the central support legs for the lower bunk, providing additional stability to the bed base.

Step 3: Attach Ladder

Secure the ladder (7) to the lower bed base (6) using 2 sets of Bolt (A), Spring Washer (G), and Flat Washer (E). Attach the top of the ladder to the upper bed base (5) using 2 sets of Bolt (B), Spring Washer (H), and Flat Washer (F).

Illustration detailing how to securely attach the ladder to both the upper and lower bunk frames, ensuring safe access to the top bunk.

Step 4: Install Guardrails

Attach the long upper guardrail (3) and short upper guardrail (4) to the upper end frames (1 and 2) and upper bed base (5). Use 7 sets of Bolt (D), Spring Washer (H), and Flat Washer (F) for these connections. Use the Allen Key (I) to tighten all bolts securely from all previous steps.

Diagram showing the final step of attaching the safety guardrails to the upper bunk, emphasizing the importance of secure fastening for user safety.

تعليمات التشغيل

• وضع المرتبة: Place a Twin size mattress (74"-75" L x 37-1/2"-38-1/2" W) on the upper bunk and a Full size mattress (74"-75" L x 53-1/2"-54-1/2" W) on the lower bunk.
• سمك المرتبة: The thickness of the upper bunk mattress should not exceed 8 inches. The surface of the upper mattress must be at least 5 inches below the top edge of the guardrails.
• قدرة الوزن: The upper bunk has a maximum static weight capacity of 300 lbs. The lower bunk also supports up to 400 lbs. Do not exceed these limits.
• استخدام السلم: Always use the integrated ladder for safe entry and exit from the upper bunk.
• حواجز الحماية: Ensure guardrails are always in place on both long sides of the upper bunk.

A lifestyle image of the bunk bed fully assembled with mattresses and bedding, demonstrating its intended use in a bedroom setting.

صيانة

• التفتيش الدوري: Periodically check all bolts, screws, and connectors to ensure they are tight. Retighten as necessary to maintain structural integrity.
• فحص المكونات: Inspect guardrails, the ladder, and all other components for any signs of damage, wear, or loose connections. Replace any damaged parts immediately.
• تنظيف: نظف الإطار المعدني بقطعة قماش ناعمة و...amp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the pewter finish.
• استبدال الجزء: Do not use substitute parts. For replacement parts, including additional guardrails, contact the manufacturer's customer service department.

استكشاف الأخطاء وإصلاحها

• التذبذب أو عدم الاستقرار: If the bunk bed feels unstable, re-check all assembly bolts and ensure they are fully tightened. Ensure the bed is placed on a flat, level surface.
• اجزاء مفقودة: If any parts are missing upon unboxing, refer to the parts list and contact customer service for replacements.
• صعوبة في التجميع: Review the assembly video and step-by-step instructions. Ensure correct hardware is used for each step. Do not force parts together.

تحديد

الضمان والدعم

For warranty information or customer support, please refer to the documentation included with your purchase or contact Powell customer service directly. Keep your proof of purchase for any warranty claims.