GREENCUT GTC300XE Petrol Tiller Instruction Manual

1. المقدمة

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your GREENCUT GTC300XE petrol tiller. Please read this manual thoroughly before using the machine to ensure proper handling and to prevent injury or damage.

The GREENCUT GTC300XE is a powerful and versatile petrol tiller designed for soil cultivation in gardens and agricultural fields. It features a 212cc 7hp 4-stroke engine with electric start, an 85cm working width, and three operational speeds (two forward, one reverse).

2. تعليمات السلامة

Always prioritize safety when operating machinery. Failure to follow these instructions may result in serious injury or death.

• اقرأ الدليل كاملا: Before assembly, operation, or maintenance, read and understand all instructions and warnings in this manual.
• معدات الحماية الشخصية (PPE): Always wear appropriate PPE, including safety glasses, hearing protection, sturdy footwear, and gloves.
• التعامل مع الوقود: Petrol is highly flammable. Refuel in a well-ventilated area with the engine off and cool. Do not smoke or allow open flames near the machine.
• منطقة العمل: Clear the work area of stones, debris, and other objects that could be thrown by the blades. Keep bystanders, children, and pets away from the operating area.
• Engine Hot: يسخن المحرك ونظام العادم بشدة أثناء التشغيل، ويظلان ساخنين لفترة بعد إيقاف التشغيل. تجنب ملامستهما لمنع الحروق.
• سلامة الشفرة: The tiller blades are sharp and rotate at high speed. Never touch the blades while the engine is running. Disconnect the spark plug wire before performing any maintenance on the blades.
• عملية المنحدر: Exercise extreme caution when operating on slopes. Operate across the face of slopes, never up and down. Avoid excessively steep slopes.
• صيانة: Perform all maintenance as described in this manual. Use only genuine replacement parts.

3. التجميع والإعداد

Follow these steps to assemble your GREENCUT GTC300XE tiller.

3.1 فك الصندوق والتحقق من المكونات

Carefully remove all components from the packaging. Verify that all parts are present according to the packing list. If any parts are missing or damaged, contact customer support.

الشكل 3.1: بشكل عام view of the GREENCUT GTC300XE Petrol Tiller.

3.2 مجموعة المقود

Attach the upper and lower handlebar sections using the provided bolts and nuts. Ensure all connections are secure. Adjust the handlebar height to a comfortable operating position, typically around waist height.

الشكل 3.2: الجبهة view showing the handlebar and engine.

3.3 Blade and Wheel Attachment

Install the hardened steel tiller blades onto the main shaft. Ensure they are correctly oriented for proper soil turning. Secure them with the retaining pins or bolts. Attach the transport wheels to the front or rear as per the design, ensuring they are firmly in place for stability during transport or storage.

الشكل 3.3: مفصل view of the interchangeable hardened steel blades.

Figure 3.4: Detail of the robust transport wheel.

3.4 إضافة الوقود والزيت

Before first use, fill the engine with appropriate 4-stroke engine oil (refer to specifications for type and capacity). Fill the fuel tank with unleaded petrol. Do not overfill. Always check oil and fuel levels before each use.

Figure 3.5: Engine and fuel tank area, showing the electric start controller.

3.5 توصيل بدء التشغيل الكهربائي

Ensure the battery for the electric start system is charged and properly connected. Refer to the specific instructions for battery charging and connection if provided separately.

Figure 3.6: Electric start button and controller for easy engine ignition.

4. تعليمات التشغيل

Familiarize yourself with the controls before starting the engine.

4.1 قائمة التحقق قبل التشغيل

• التحقق من مستوى زيت المحرك.
• التحقق من مستوى الوقود.
• Inspect blades for damage or wear.
• Ensure all nuts, bolts, and fasteners are tight.
• Clear the work area of any obstacles.

4.2 بدء تشغيل المحرك (التشغيل الكهربائي)

1. تأكد من أن صمام الوقود مفتوح.
2. Set the choke lever to the 'CHOKE' position (cold engine).
3. Turn the ignition key or press the electric start button.
4. بمجرد بدء تشغيل المحرك، قم بتحريك ذراع الخانق تدريجياً إلى وضع "التشغيل" مع ارتفاع درجة حرارة المحرك.

4.3 Engaging Gears and Tilling

The GTC300XE features 3 speeds: 2 forward (short and long) and 1 reverse. Select the desired gear using the gear lever. For initial tilling, start with a lower forward speed. The working width is 85cm, and the tilling depth can reach up to 35cm depending on soil conditions and machine adjustment.

Figure 4.1: Dimensions of the tiller, indicating its working capacity.

4.4 إيقاف المحرك

To stop the engine, move the throttle lever to the 'STOP' position or turn the ignition key to 'OFF'. Close the fuel valve if storing for an extended period.

5. الصيانة

Regular maintenance ensures the longevity and optimal performance of your tiller.

• تنظيف: After each use, clean soil and debris from the blades, chassis, and engine cooling fins.
• فحص الشفرة: Regularly inspect the blades for wear, damage, or looseness. Replace worn or damaged blades promptly.
• تغيير زيت المحرك: قم بتغيير زيت المحرك بعد أول 5 ساعة من التشغيل، ثم كل 25-50 ساعة أو سنوياً، أيهما يأتي أولاً.
• فلتر الهواء: نظّف فلتر الهواء بانتظام، وخاصة في الظروف المتربة. استبدله إذا كان تالفاً.
• ولاعة: Inspect the spark plug annually. Clean or replace as necessary.
• تخزين: For long-term storage, drain the fuel tank or add a fuel stabilizer. Clean the machine thoroughly and store in a dry, protected area.

6. استكشاف الأخطاء وإصلاحها

يتناول هذا القسم المشكلات الشائعة التي قد تواجهها.

إذا استمرت المشكلات بعد محاولة هذه الحلول، فيرجى الاتصال بفنيي الخدمة المؤهلين.

7. المواصفات

8. الضمان والدعم

For information regarding warranty coverage, spare parts availability, or technical support, please refer to the documentation provided with your purchase or contact Greencut customer service directly. Keep your proof of purchase for any warranty claims.

Please note that information on spare parts availability was not provided in the product details.