مقدمة
Welcome to the Delta 40-694 20-inch Variable Speed Scroll Saw. This manual provides essential information for the safe and efficient operation, maintenance, and setup of your new scroll saw. Please read it thoroughly before use to ensure proper handling and to maximize the lifespan of your tool. This scroll saw is designed for precision cutting in various materials, primarily wood, offering variable speed control for optimal performance.
تعليمات السلامة العامة
Always follow basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and serious personal injury. Keep this manual for future reference.
- ارتداء حماية العين: ارتدِ دائمًا نظارات أو نظارات واقية تتوافق مع المعايير المعمول بها.
- تأمين قطعة العمل: Ensure the material being cut is firmly secured to prevent movement during operation.
- إبقاء الأيدي نظيفة: Never place hands or fingers near the blade while the saw is running.
- التهوية المناسبة: Operate the saw in a well-ventilated area to avoid inhaling dust.
- افصل قبل التعديلات: Always disconnect the saw from the power source before changing blades, making adjustments, or performing maintenance.
- Maintain Awareness: Stay alert and use common sense. Do not operate the saw when tired or under the influence of drugs, alcohol, or medication.
- استخدم الشفرة الصحيحة: Select the appropriate blade for the material and type of cut.
الإعداد والتجميع
فك التعبئة والتفتيش
Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Report any damage immediately to your dealer. Ensure all parts listed in the packing list are present before proceeding with assembly.
Blade Installation and Tensioning
The Delta 40-694 features a single-lever, tool-free blade tensioning system for quick and easy blade changes. The upper arm lifts and locks in the raised position, providing ample space for blade access, especially for fretwork.
- Lift the upper arm to its fully raised position and engage the locking mechanism.
- قم بفك الشفرة clamps on both the upper and lower arms.
- Insert the new scroll saw blade, ensuring the teeth are pointing downwards.
- Securely tighten the blade clamps.
- Release the upper arm and apply tension using the blade tensioning lever. Adjust until the blade is taut but not over-stressed.
التفاصيل view of the scroll saw's upper arm, highlighting the blade tensioning lever, variable speed dial, and flexible dust blower. This area is crucial for blade changes and precise adjustments.
تعديل الجدول
The large, cast-iron table can be tilted from 0° to 45° left and right for angled cuts. Use the angle scale and locking knob located beneath the table to set the desired angle. Ensure the table is securely locked before operation.
ضبط منفاخ الغبار
The flexible dust blower helps keep the cutting line clear of sawdust. Position the nozzle directly over the cutting area for optimal visibility.
انتهىview of the Delta 40-694 scroll saw, showing its main components including the table, arm, and base.
تعليمات التشغيل
تشغيل/إيقاف التشغيل والتحكم في السرعة
The On/Off switch and electronic variable speed dial are conveniently located on the arm for easy access. Turn the dial to adjust the Strokes Per Minute (SPM) from 400 to 1,750, allowing you to match the speed to the material and blade type for optimal cutting results.
قدرات القطع
- At 90°: 2-1/8 inches
- At 45° (Left and Right): 1-5/8 inches
General Cutting Techniques
Always feed the workpiece slowly and steadily into the blade. Avoid forcing the material, as this can cause the blade to break or result in an uneven cut. For intricate cuts, use a finer blade and a slower speed. For thicker materials, a coarser blade and moderate speed may be more effective.
صيانة
Regular maintenance ensures the longevity and optimal performance of your scroll saw.
- تنظيف: After each use, unplug the saw and use a brush or vacuum to remove sawdust from the table, blade area, and motor vents.
- العناية بالشفرة: Proper blade tensioning is crucial for maximizing blade life and accuracy. Replace dull or damaged blades promptly.
- تقتيش: Periodically check all fasteners and moving parts for tightness and wear. Tighten any loose screws and replace worn components as needed.
A view of the integrated blade storage compartment located on the scroll saw, designed for convenient access to different blade types.
استكشاف الأخطاء وإصلاحها
This section addresses common issues you might encounter with your scroll saw.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الشفرة تنكسر بشكل متكرر | Incorrect blade tension, wrong blade type for material, forcing workpiece, worn blade. | Adjust blade tension, select appropriate blade, reduce feed rate, replace blade. |
| اهتزاز مفرط | Loose components, saw not securely mounted, unbalanced workpiece. | Check and tighten all fasteners, ensure saw is stable, support workpiece properly. |
| Poor cut quality (rough edges, inaccurate cuts) | Dull blade, incorrect blade type, improper feed rate, incorrect table angle. | Replace blade, use finer blade for detail, adjust feed rate, verify table angle. |
| المنشار لا يبدأ | لا يوجد طاقة، مفتاح معيب، مشكلة في المحرك. | Check power connection, ensure switch is ON, consult qualified service personnel. |
تحديد
Key technical specifications for the Delta 40-694 20-inch Variable Speed Scroll Saw:
- Ampإيراج: 1.3 Amps
- السرعات: 400-1,750 ضربة في الدقيقة
- سعة: 20 بوصة
- طول الضربة: 3/4 بوصة
- حجم الجدول: 16 بوصة × 24 بوصة
- إمالة الجدول: 0° – 45°, Left and Right
- أبعاد المنتج: 30 بوصة طول × 20 بوصة عرض × 13 بوصة ارتفاع
- وزن السلعة: 60 رطل
- المجلدtage: 120 فولت
- واتtage: 156 واط
- مادة الشفرة: الفولاذ عالي السرعة
- توصية السطح: خشب
- مصدر الطاقة: كابل كهربائي
الضمان والدعم
معلومات الضمان
This Delta 40-694 Scroll Saw is covered by a ضمان محدود لمدة عامين. Please refer to the warranty card included with your product for full terms and conditions, or visit the official Delta Power Tools webموقع للحصول على معلومات الضمان التفصيلية.
دعم العملاء
For technical assistance, replacement parts, or warranty claims, please contact Delta Power Tools customer service. Contact information can typically be found on the manufacturer's webالموقع أو على عبوة المنتج.
