NUUO NE-4160-US

دليل المستخدم لمسجل فيديو الشبكة NUUO NVRmini2 NE-4160

Model: NE-4160-US

1. المقدمة

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the NUUO NVRmini2 NE-4160 Network Video Recorder. The NE-4160 is a 16-channel NVR designed for robust surveillance systems, featuring 4 drive bays and a 4TB storage capacity, compatible with various IP cameras.

Please read this manual thoroughly before operating the device to ensure proper setup and optimal performance.

2. احتياطات السلامة

3. محتويات العبوة

تأكد من وجود جميع العناصر في العبوة:

4. انتهى المنتجview

The NUUO NVRmini2 NE-4160 is a robust network video recorder designed for professional surveillance applications. It supports up to 16 IP camera channels and features four hot-swappable drive bays for extensive storage, pre-installed with 4TB capacity.

أمام view of the NUUO NVRmini2 NE-4160 NVR unit

الشكل 4.1: الجبهة view of the NUUO NVRmini2 NE-4160 NVR unit. This image shows the compact black chassis with the NUUO logo on the left side, status indicator lights, and a lockable front panel for drive bay access.

بزاوية view of the NUUO NVRmini2 NE-4160 NVR unit

الشكل 4.2: بزاوية view of the NUUO NVRmini2 NE-4160 NVR unit. This perspective highlights the sleek design and the textured finish of the front panel, providing a better sense of the unit's dimensions.

مؤشرات اللوحة الأمامية:

5. الإعداد والتثبيت

5.1 تركيب الأجهزة

  1. فك التعبئة: Carefully remove the NVR from its packaging.
  2. Hard Drive Installation (if not pre-installed):
    • Unlock the front panel and open the drive bay door.
    • Slide the hard drive trays out.
    • Secure 3.5-inch SATA hard drives into the trays using the provided screws.
    • Slide the trays back into the bays until they click into place.
    • أغلق وأغلق اللوحة الأمامية.
  3. إتصال شبكة: Connect one end of the Ethernet cable to the NVR's LAN port and the other end to your network router or switch.
  4. توصيل الطاقة: قم بتوصيل محول الطاقة بمدخل الطاقة الخاص بجهاز التسجيل الشبكي (NVR)، ثم قم بتوصيله بمأخذ كهربائي. سيتم تشغيل جهاز التسجيل الشبكي تلقائيًا.

5.2 التكوين الأولي للبرنامج

Upon first boot, the NVR will acquire an IP address via DHCP (if available). You can access the NVR's web interface using its IP address or by using the NUUO Finder utility.

  1. Discovering the NVR:
    • Install the NUUO Finder utility from the provided CD or NUUO webموقع على جهاز كمبيوتر متصل بنفس الشبكة.
    • Run NUUO Finder to scan for the NVRmini2 NE-4160 on your network.
    • Note down the NVR's IP address.
  2. الوصول Web الواجهة:
    • افتح web browser (e.g., Chrome, Firefox) and enter the NVR's IP address in the address bar.
    • Log in using the default username (e.g., "admin") and password (e.g., "admin"). It is highly recommended to change the default password immediately after the first login.
  3. تهيئة النظام: Follow the on-screen wizard for initial setup, which typically includes:
    • ضبط التاريخ والوقت
    • Network Settings (Static IP configuration, if desired)
    • Hard Drive Formatting (if required)
    • مضيفا كاميرات IP

6. تشغيل جهاز تسجيل الفيديو الشبكي (NVR)

6.1 مباشر View

البث المباشر View interface allows you to monitor all connected cameras in real-time. You can customize the layout, view multiple cameras simultaneously, and access various controls.

6.2 إدارة التسجيل

The NVRmini2 NE-4160 supports various recording modes:

Configure recording settings for each camera in the "Recording" section of the web واجهة.

6.3 التشغيل والتصدير

لإعادةview تم تسجيل فوtage:

  1. Navigate to the "Playback" section.
  2. حدد الكاميرا (الكاميرات) المطلوبة ونطاق التاريخ/الوقت.
  3. استخدم المخطط الزمني للتنقل بين التسجيلات.
  4. لتصدير footage, select the desired segment and choose the export format (e.g., AVI, MP4).

7. الصيانة

7.1 الشيكات المنتظمة

7.2 النسخ الاحتياطي للبيانات

While the NVR records continuously, it is advisable to back up critical footage regularly to external storage or a network location.

8. استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
NVR not powering onNo power, faulty power adapterCheck power cable connection; try a different power outlet; test power adapter.
لا يمكن الوصول web واجهةIncorrect IP address, network issue, firewallVerify NVR's IP address using NUUO Finder; check network cable; temporarily disable firewall on PC.
No video from camerasCamera not connected, incorrect camera settings, network issueEnsure cameras are powered and connected; verify camera IP addresses and credentials in NVR settings; check network connectivity.
لم يتم اكتشاف القرص الصلبImproper installation, faulty drive, incorrect formatRe-seat the hard drive; try a different drive bay; ensure drive is compatible and formatted correctly.

If the problem persists after attempting the above solutions, please contact NUUO technical support.

9. المواصفات

ميزةالتفاصيل
رقم الموديلNE-4160-US
ماركةنووو
القنوات المدعومة16
حجرات القيادة4
Pre-installed Storage4 تيرابايت (4000 جيجابايت)
الاتصالإيثرنت
الأجهزة المتوافقةكاميرات IP
أول تاريخ متاح9 ديسمبر 2013

10. معلومات الضمان

NUUO products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official NUUO website for detailed warranty terms and conditions specific to the NE-4160-US model. Keep your proof of purchase for warranty claims.

11. الدعم الفني

For technical assistance, software updates, or further inquiries, please contact NUUO technical support through their official channels:

When contacting support, please have your product model number (NE-4160-US) and serial number ready.

المستندات ذات الصلة - NE-4160-US

قبلview دليل البدء السريع لـ NUUO Crystal
دليل البدء السريع لإعداد وتثبيت حل المراقبة NUUO Crystal، والذي يغطي فك العبوة، وتثبيت الأجهزة، وإعداد البرنامج، والتكوين الأولي.
قبلview دليل تثبيت برنامج نظام الإدارة المركزية NUUO
يوفر هذا الدليل تعليمات مفصلة لتثبيت نظام إدارة NUUO المركزي (NCS)، ويغطي متطلبات النظام، والتثبيت خطوة بخطوة لـ SQL Server 2005 Express، وNCS Server، وNCS Client، وNCS Matrix، بالإضافة إلى خطوات التكوين وإدارة المناطق الزمنية المتقاطعة.
قبلview دليل مستخدم NUUO NVRmini 2: حل المراقبة الذكي
دليل المستخدم لجهاز تسجيل الفيديو الشبكي NUUO NVRmini 2. يوفر إرشادات شاملة حول التثبيت والإعداد وتكوين الكاميرا والتسجيل والتخزين وإعدادات الشبكة وتكامل نقاط البيع والبث المباشر. view، التشغيل، واستكشاف الأخطاء وإصلاحها لأنظمة المراقبة الذكية.
قبلview دليل المستخدم NUUO NVRsolo Plus (عن بعد)
Comprehensive user manual for the NUUO NVRsolo Plus, detailing installation, configuration, settings, remote access, and advanced features for intelligent surveillance solutions. Learn to set up and manage your surveillance system effectively.
قبلview إجراء ترقية NUUO Titan NVR إلى Crystal
دليل خطوة بخطوة لترقية أنظمة NUUO Titan NVR إلى البرامج الثابتة Crystal V.2.x، بما في ذلك البرامج المطلوبة fileالإجراءات واللوائح.
قبلview قائمة توافق NUUO NVRsolo الإصدار 2.1.5
توفر هذه الوثيقة قائمة توافق شاملة لجهاز NUUO NVRsolo v2.1.5، وتفصّل محركات الأقراص الصلبة (HDD) والشاشات ولوحات اللمس وأجهزة UPS ووحدات تخزين DAS وموجهات UPnP وعصي التحكم المدعومة، و web browsers. It also includes a document history of firmware updates.