User Manual for FERMAX Loft Basic 3390 Home Telephone

1. انتهى المنتجview

The FERMAX Loft Basic 3390 is a home telephone designed for VDS wiring systems, featuring a surface-mounted construction. This device facilitates audio communication between the outside and the apartment, and allows for door opening. Its design emphasizes simplicity and functionality, combining quality with a modern aesthetic. Constructed from impact-resistant ABS plastic, it boasts a textured, easy-to-clean surface and UV protection for enhanced durability and resistance to light exposure. Installation is quick and straightforward.

Figure 1: FERMAX Loft Basic 3390 Home Telephone. This image shows the white, rectangular unit with the brand name 'FERMAX' at the top right, a blue circular door release button, and a coiled telephone cord extending from the bottom.

2. الميزات الرئيسية

• نموذج: FERMAX Loft Basic Home Telephone (3390)
• نوع الأسلاك: VDS system compatibility
• بناء: Surface-mounted for easy installation
• الوظائف: Audio connection for communication and door release
• مادة: Durable ABS plastic with textured, easy-to-clean surface
• حماية: UV protection to prevent discoloration from light exposure

3. دليل التثبيت

3.1 احتياطات السلامة

• Always disconnect power to the intercom system before beginning installation.
• Ensure all wiring is performed by a qualified individual if you are unsure.
• اتبع القوانين واللوائح الكهربائية المحلية.

3.2 تركيب الوحدة

1. Choose a suitable location on the wall, typically near the entrance or in a central area of the apartment.
2. Mark the drilling points on the wall using the unit's mounting holes as a template.
3. قم بحفر الثقوب وإدخال المقابس الجدارية المناسبة (إذا لزم الأمر).
4. Secure the mounting bracket or the unit directly to the wall using screws.

3.3 Wiring (VDS System)

The FERMAX Loft Basic 3390 uses a VDS wiring system, which typically requires a simple 3-wire connection. Refer to the specific wiring diagram provided with your product packaging for precise connections, as configurations may vary slightly.

1. Identify the incoming VDS bus wires from your building's intercom system.
2. Connect the wires to the corresponding terminals on the FERMAX 3390 unit. Typically, these are data, power, and ground.
3. تأكد من أن جميع التوصيلات آمنة ومعزولة بشكل صحيح.

3.4 Testing the System

1. Restore power to the intercom system.
2. Test the audio communication by initiating a call from the outdoor panel.
3. Verify that the door release function operates correctly when the button on the unit is pressed.

4. التشغيل

4.1 تلقي مكالمة

When someone calls from the outdoor panel, the FERMAX Loft Basic 3390 will ring. Lift the handset to establish audio communication with the visitor.

4.2 فتح الباب

During an active conversation or after receiving a call, press the blue circular button on the unit to activate the door release mechanism. The door will unlock, allowing the visitor to enter.

4.3 Private Communication

The system is designed to provide private communication between the indoor unit and the outdoor panel, ensuring your conversations are not overheard by other units in the building.

5. الرعاية والصيانة

• تنظيف: استخدمي قطعة قماش ناعمةamp cloth to clean the surface of the unit. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the ABS plastic and its UV protective coating.
• إزالة الغبار: Regularly wipe down the unit to prevent dust buildup, especially around the handset and buttons.
• الظروف البيئية: While the unit has UV protection, prolonged exposure to direct sunlight or extreme temperatures should be avoided to ensure longevity.

6. استكشاف الأخطاء وإصلاحها

6.1 No Audio During Call

• التحقق من الأسلاك: Ensure all 3 wires are securely connected to the terminals on the unit and at the main system connection point.
• قوة النظام: Verify that the entire intercom system has power.
• Handset Placement: Ensure the handset is properly seated on the base when not in use.

6.2 الباب لا يفتح

• وظيفة الزر: Press the door release button firmly. Listen for a click or hum from the door lock mechanism.
• التوصيلات الكهربائية: Check the wiring specifically for the door release function.
• حالة النظام: Ensure the intercom system is active and not in a fault state.

6.3 No Ringing Sound

• إعدادات الصوت: Check if there are any volume controls or mute switches on the unit (though this model is basic, some systems have this).
• اتصال النظام: Confirm the unit is properly registered and connected to the building's intercom system.

If issues persist after performing these checks, it is recommended to contact a qualified technician or FERMAX customer support.

7. المواصفات الفنية

8. الضمان والدعم

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official FERMAX webقد تختلف شروط وأحكام الضمان حسب المنطقة والتاجر.

For technical support, spare parts, or service inquiries, please contact FERMAX customer service directly. Contact details can typically be found on the manufacturer's webالموقع أو في عبوة منتجك.