FURUNO FUR-IF-NMEA2K2 NMEA 0183 to NMEA 2000 Converter Instruction Manual

1. المقدمة

This manual provides essential information for the proper installation, operation, and maintenance of the FURUNO FUR-IF-NMEA2K2 NMEA 0183 to NMEA 2000 Converter. This device facilitates bidirectional data conversion between NMEA 0183 and NMEA 2000 CAN bus systems, offering selectable high-speed modes for specific data types like heading and AIS.

Please read this manual thoroughly before using the product to ensure safe and efficient operation.

2. معلومات السلامة

Always observe the following precautions to prevent injury and damage to the equipment.

• تأكد من فصل الطاقة قبل التثبيت أو الصيانة.
• لا تعرض الوحدة لدرجات حرارة عالية أو لأشعة الشمس المباشرة لفترات طويلة.
• Consult a qualified technician for any repairs beyond basic troubleshooting.
• استخدم فقط مصادر الطاقة والكابلات المحددة.

3. الإعداد والتثبيت

The FUR-IF-NMEA2K2 converter is designed for straightforward integration into existing marine electronic systems. Proper installation is crucial for optimal performance.

3.1 فك العبوة والتفتيش

Upon receiving the unit, carefully unpack it and inspect for any signs of damage. Ensure all components are present.

3.2 موقع التركيب

Select a mounting location that is dry, protected from direct weather exposure, and allows for adequate ventilation. Avoid areas with high vibration or electromagnetic interference.

3.3 توصيلات الأسلاك

The converter features connections for both NMEA 0183 and NMEA 2000 networks. Refer to the diagram below for proper wiring.

Figure 1: FURUNO FUR-IF-NMEA2K2 NMEA Data Converter. The image displays the converter unit with a circular NMEA 2000 connector on one end and multiple color-coded bare wires for NMEA 0183 connections on the other. The main body of the converter is black with a label indicating "NMEA DATA CONVERTER", "TYPE IF-NMEA2K2", "SER.NO. 001866", and options for "NORMAL" or "HIGH SPEED (CUT ORANGE)" operation.

3.3.1 اتصال NMEA 2000

Connect the circular NMEA 2000 connector to your vessel's NMEA 2000 backbone. Ensure a secure, watertight connection.

3.3.2 اتصال NMEA 0183

The bare wires are for NMEA 0183 input and output. Refer to your NMEA 0183 device's manual for specific wiring requirements. Common connections include:

• Data In (Rx): Connect to the NMEA 0183 Talker's Output (Tx).
• Data Out (Tx): Connect to the NMEA 0183 Listener's Input (Rx).
• أرضي: Connect to the common ground of the NMEA 0183 system.

3.4 High-Speed Mode Selection

The converter supports a high-speed mode for specific data types. To enable high-speed mode (e.g., for heading and AIS data), locate the orange wire and follow the instructions on the converter's label. Typically, this involves cutting or connecting the orange wire as indicated for "HIGH SPEED (CUT ORANGE)" or "NORMAL" operation.

ملحوظة: Incorrect selection may lead to data transmission errors. Consult your system's requirements before altering this setting.

4. تعليمات التشغيل

Once properly installed and powered, the FUR-IF-NMEA2K2 converter operates automatically, translating data between the connected NMEA 0183 and NMEA 2000 networks.

4.1 تشغيل

Ensure all connections are secure. Apply power to the NMEA 2000 network. The converter will power on automatically as it draws power from the NMEA 2000 bus.

4.2 Data Flow

The converter transparently translates NMEA 0183 sentences to NMEA 2000 PGNs (Parameter Group Numbers) and vice-versa. Verify data reception on your connected NMEA 0183 and NMEA 2000 devices.

• NMEA 0183 to NMEA 2000: Data from NMEA 0183 talkers connected to the converter's input will be broadcast on the NMEA 2000 network.
• NMEA 2000 to NMEA 0183: Relevant NMEA 2000 PGNs will be converted into NMEA 0183 sentences and output via the converter's NMEA 0183 output wires.

5. الصيانة

The FUR-IF-NMEA2K2 converter is designed for minimal maintenance. Regular checks can help ensure long-term reliability.

• التفتيش الدوري: Annually inspect all cable connections for corrosion or damage. Ensure connections are tight.
• تنظيف: If necessary, gently wipe the unit with a soft, damp قماش. لا تستخدم مواد كيميائية قاسية أو منظفات كاشطة.
• تحديثات البرامج: Check the FURUNO website periodically for any firmware updates for the converter. Follow specific instructions provided with any updates.

6. استكشاف الأخطاء وإصلاحها

If you experience issues with the converter, refer to the following troubleshooting guide before contacting support.

7. المواصفات

8. الدعم والضمان

For technical assistance or warranty inquiries, please contact FURUNO customer support. Refer to the official FURUNO webللحصول على أحدث معلومات الاتصال وتفاصيل سياسة الضمان، يرجى زيارة الموقع الإلكتروني.

فورونو Webموقع: www.furuno.com