Claber Idris Spike 8052

دليل مستخدم نظام الري الأوتوماتيكي Claber Idris Spike 8052

Model: Idris Spike 8052

1. المقدمة

The Claber Idris Spike is designed to provide automatic, hassle-free watering for potted plants. This system ensures a continuous water supply for up to 20 days, making it ideal for maintaining plant hydration when you are away. It is easy to install and suitable for various home and office plant watering needs.

2. معلومات السلامة

  • يحفظ بعيدًا عن متناول الأطفال والحيوانات الأليفة.
  • Always follow installation instructions carefully to prevent accidents.
  • Do not connect to a water source without proper precautions to avoid leaks or water damage.

3. محتويات العبوة

تأكد من وجود جميع المكونات:

  • 1 x Claber Idris Spike unit
  • 1 x 10cl dripper (e.g., orange)
  • 1 x 15cl dripper (e.g., blue)
Claber Idris Spike unit with two drippers

Image 1: The Claber Idris Spike unit shown with the two interchangeable drippers (orange and blue) that regulate water flow.

4. الإعداد

  1. Choose the Dripper: Select either the 10cl dripper or the 15cl dripper based on your plant's watering needs and the desired duration. The 10cl dripper provides 10 centiliters of water per day, and the 15cl dripper provides 15 centiliters per day.
  2. Attach Water Bottle: Fill a standard plastic drinks bottle with water. Screw the bottle onto the BSP thread connection at the top of the Idris Spike unit. Ensure a secure fit to prevent leaks.
  3. Create Air Hole (Recommended): To ensure consistent water flow and prevent vacuum lock, it is recommended to make a small hole in the base of the inverted water bottle (which will be at the top once installed). This allows air to enter as water is dispensed.
  4. Insert Spike into Soil: Carefully insert the spike end of the unit into the soil next to the plant you wish to water. Ensure the spike is firmly anchored in the soil to prevent tipping. When inserting, gently move the spike to ensure the dripper holes do not become completely blocked by compacted soil.
  5. Dripper Adjustment (Important): The colored threaded drippers should not be screwed in completely flush with the main unit. Leave approximately one and a half turns of threading visible. Screwing them in too tightly can restrict water flow.
Claber Idris Spike in retail packaging, showing assembly with a water bottle

Image 2: The Claber Idris Spike in its packaging, illustrating how a water bottle attaches to the unit and its placement in a plant pot.

المقطع العرضي view of Claber Idris Spike in soil, showing water delivery to roots

Image 3: A cross-section view demonstrating the Claber Idris Spike inserted into soil, illustrating how water is delivered directly to the plant's root system.

5. التشغيل

Once set up, the Claber Idris Spike will automatically provide a continuous supply of water to your plant. The chosen dripper will regulate the daily water output. Monitor the water level in the bottle periodically to determine when a refill is needed. The system is designed to provide watering for up to 20 days, depending on bottle size and dripper selection.

Claber Idris Spike in use with a potted plant

Image 4: The Claber Idris Spike in active use, providing water to a potted plant.

6. الصيانة

  • تنظيف: Periodically clean the drippers and the spike tip to prevent mineral buildup or soil blockages that could impede water flow. Ensure all components are dry and clean before reassembly to prevent air bubbles that could block water.
  • تخزين: When not in use, clean the unit thoroughly and store it in a dry, cool place away from direct sunlight.

7. استكشاف الأخطاء وإصلاحها

  • لا تدفق المياه:
    • Check if the chosen dripper is screwed in too tightly. Loosen it slightly (ensure about 1.5 turns of thread are visible).
    • Ensure there is an air hole in the inverted water bottle to allow air to enter as water exits.
    • Inspect the dripper and spike tip for any blockages from soil or debris. Clean if necessary.
    • Verify that the bottle is securely attached and not leaking from the connection point.
  • Spike Not Stable:
    • Ensure the spike is inserted deeply enough into the soil and that the soil is firm around it.
    • For larger bottles, ensure the pot is stable and the soil can support the weight.

8. المواصفات

ميزةالتفاصيل
اسم الموديلإدريس سبايك
رقم موديل العنصرidris spike
أبعاد المنتج6.3 × 1.57 × 11.81 بوصة
وزن العنصر2.12 أونصات
الشركة المصنعةكلابر
مادةالبلاستيك
مدة الريUp to 20 days (depending on bottle size and dripper)

9. الضمان والدعم

For warranty information or technical support, please refer to the official Claber webالموقع أو تواصل مع التاجر المحلي. احتفظ بإيصال الشراء كإثبات للشراء.

المستندات ذات الصلة - Idris Spike 8052

قبلview دليل مستخدم Claber Idris Spike ودليل ري النباتات
تعليمات وتوصيات مفصلة لاستخدام جهاز كلابر إدريس سبايك، وهو جهاز ري ذاتي للنباتات المزروعة في الأصص. يغطي هذا الدليل التركيب والصيانة واحتياجات الري الخاصة بكل نبات.
قبلview مؤقت الري Claber Dual Select 8488 - دليل المستخدم والدليل
دليل مستخدم شامل لمؤقت الري التلقائي Claber Dual Select 8488. تعرّف على كيفية التركيب والبرمجة والميزات والصيانة واستكشاف الأخطاء وإصلاحها لنظام ري حديقتك.
قبلview دليل يوتينتي كلابر أكوا ماجيك سيستم 8063
دليل التثبيت والتكوين واستخدام Claber Aqua-Magic System، وهو عبارة عن مجموعة أدوات أوتوماتيكية تعمل بالطاقة الشمسية للحديقة والأواني.
قبلview Claber RAIN SENSOR RF 90831 - دليل المستخدم ودليل التركيب
دليل شامل لجهاز استشعار المطر Claber RF (طراز 90831)، يوضح بالتفصيل كيفية التركيب، وتحديد المكونات، واستبدال البطارية، والتوافق مع أنظمة الري Claber.
قبلview دليل تركيب واستخدام مستشعر المطر Claber 90916
دليل شامل لجهاز استشعار المطر Claber (الطراز 90916)، يغطي التركيب والتشغيل وتوصيلات الأسلاك لأنظمة الري.
قبلview دليل تعليمات جهاز Claber Tempo myAquaSolar 8497 - مؤقت الري الشمسي الذكي
دليل تعليمات مُفصّل لجهاز Claber Tempo myAquaSolar 8497، وهو مؤقت مياه ذكي يعمل بالطاقة الشمسية. تعرّف على كيفية تركيب جهازك وإعداده وتشغيله وصيانته باستخدام تطبيق myAquaSolar واتصال بلوتوث. يتضمن هذا الدليل المواصفات الفنية، واستكشاف الأخطاء وإصلاحها، ومعلومات الضمان.