بنتاير 239000034

Pentair 23900-0034 Covered Element 22-Inch Instruction Manual

الموديل: 239000034

1. انتهى المنتجview

The Pentair 23900-0034 Covered Element is a 22-inch replacement component designed for use in Pentair pool and spa filtration systems. This element is crucial for maintaining water clarity and hygiene by effectively filtering out debris and particles from the water.

It is engineered for reliability and energy efficiency, contributing to a cleaner and more enjoyable aquatic environment. This product is sold as a single covered element and requires no assembly prior to installation into the compatible filtration unit.

2. معلومات السلامة

  • Always disconnect power to the pump and filter system before performing any maintenance or installation.
  • Ensure the system is depressurized before opening the filter housing.
  • Wear appropriate personal protective equipment, such as gloves and eye protection, when handling pool chemicals or filter components.
  • Keep children and pets away from the pool equipment area during installation and maintenance.
  • Refer to your main filter system's manual for specific safety instructions and procedures.

WARNING: This product may expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. الإعداد والتثبيت

The Pentair 23900-0034 Covered Element is designed for straightforward installation as a replacement part within compatible Pentair filter systems. No assembly of the element itself is required.

  1. Prepare the Filter System:
    • Turn off the pool pump and disconnect all power to the filter system.
    • Open the air relief valve on top of the filter to release any pressure.
    • Drain the filter tank according to your filter system's instructions.
  2. Access the Filter Elements:
    • Remove the filter tank lid or top section as per your filter system's manual. This usually involves unlatching clamps or unscrewing a collar.
    • Carefully lift out the existing filter elements. Note their orientation for proper reinstallation.
  3. Install the New Element:Pentair 23900-0034 Covered Element, side view

    الصورة 1: الجانب view of the Pentair 23900-0034 Covered Element, showing its elongated, covered design.

    • Inspect the new Pentair 23900-0034 Covered Element for any damage.
    • Carefully slide the new element into its designated position within the filter manifold. Ensure it seats properly.
    • Repeat for all elements if replacing multiple.
  4. Reassemble and Start Up:Pentair 23900-0034 Covered Element, flat view

    Image 2: Flat view of the Pentair 23900-0034 Covered Element, illustrating its surface area and grid pattern.

    • Replace the filter tank lid and secure it according to the manufacturer's instructions.
    • Close the air relief valve.
    • Turn on the pool pump. Once water begins to flow, slowly open the air relief valve until a steady stream of water (not air) emerges, then close it.
    • Check for leaks around the filter tank.

4. التشغيل

The Pentair 23900-0034 Covered Element operates passively within your pool or spa's cartridge filter system. Its primary function is to trap suspended particles as water passes through its filtration media.

  • دورة الترشيح: Water from the pool/spa is pumped into the filter tank, passes through the element, and clean water is returned to the pool/spa.
  • مراقبة الضغط: Monitor the pressure gauge on your filter system. A gradual increase in pressure indicates that the filter element is collecting debris and requires cleaning or replacement.
  • الأداء الأمثل: For optimal filtration, ensure your pump is running for an adequate duration each day, typically 8-12 hours, depending on pool size and usage.

5. الصيانة

Regular maintenance of the Pentair 23900-0034 Covered Element is essential for efficient filtration and extending the life of your filter system.

  1. التنظيف الروتيني:
    • When the filter pressure rises 8-10 PSI above its clean starting pressure, it's time to clean the element.
    • Turn off the pump and depressurize the system as described in the "Setup and Installation" section.
    • Remove the element from the filter tank.
    • Hose off the element thoroughly with a garden hose, working from top to bottom, to remove loose debris.
  2. Deep Cleaning (Chemical Soak):
    • Periodically, or if hosing does not restore pressure adequately, soak the element in a specialized filter cleaning solution to remove oils, scale, and embedded debris. Follow the cleaner manufacturer's instructions carefully.
    • Rinse thoroughly after soaking.
  3. التفتيش والاستبدال:
    • Inspect the element for tears, cracks, or damage to the fabric or end caps during each cleaning.
    • A damaged element will not filter effectively and must be replaced immediately.
    • Filter elements typically last 1-3 years depending on usage, water chemistry, and maintenance. Replace the element when it no longer cleans effectively or shows signs of wear.

6. استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
High Filter Pressureعنصر فلتر مسدود.Clean or replace the filter element.
انخفاض تدفق المياه / ضعف الترشيحClogged filter element, damaged element, or air in the system.Clean or replace element. Bleed air from the system. Check pump and skimmer for blockages.
Water Not ClearingDamaged filter element, improper water chemistry, or insufficient filtration time.Inspect and replace damaged element. Balance pool chemistry. Increase pump run time.
Leaks Around Filter TankImproperly sealed lid, damaged O-ring, or cracked tank.Ensure lid is properly secured. Inspect and replace O-ring if damaged. Consult a professional for tank damage.

If troubleshooting steps do not resolve the issue, contact a qualified pool technician or Pentair customer support.

7. المواصفات

  • رقم الموديل: 239000034
  • نوع المنتج: Covered Element
  • مقاس: 22 بوصة
  • ماركة: بينتير
  • أبعاد المنتج: 19.25 × 0.75 × 19.25 بوصة
  • وزن السلعة: 1.8 رطل
  • الشركة المصنعة: Pentair - Distribution

8. الضمان والدعم

For specific warranty information regarding your Pentair 23900-0034 Covered Element, please refer to the documentation provided with your complete Pentair filtration system or visit the official Pentair webموقع.

For technical support, replacement parts, or further assistance, please contact Pentair customer service or an authorized Pentair dealer. Contact information can typically be found on the Pentair webالموقع أو في عبوة منتجك.

مسؤول شركة بنتاير Webموقع: www.pentair.com

المستندات ذات الصلة - 239000034

قبلview فلتر خرطوشة Pentair Clean and Clear Plus: دليل التركيب والمستخدم
دليل شامل لتركيب وتشغيل وصيانة فلتر خرطوشة Pentair Clean and Clear Plus. يتضمن تعليمات السلامة، واستكشاف الأخطاء وإصلاحها، والبيانات الفنية، ومعلومات عن قطع الغيار.
قبلview Pentair Replacement Parts Price List 2021
Official Pentair 2021 Replacement Parts Price List, detailing part numbers, descriptions, and prices in USD and CAD for a wide range of pool and spa equipment.
قبلview دليل تركيب جهاز تعبئة المسابح الأوتوماتيكي Pentair T40-FN للمسابح ذات الحواف المتلاشية
تعرّف على جهاز تعبئة المسابح الأوتوماتيكي Pentair T40-FN، المصمم خصيصًا للمسابح ذات الحواف المتلاشية. يوفر هذا الدليل تفاصيل التركيب وتحذيرات السلامة لضمان التكامل السليم مع نظام تجميع المياه.asinوحديد التسليح.
قبلview دليل تركيب واستخدام فلتر خرطوشة Pentair Clean and Clear Plus
دليل شامل للتركيب والتشغيل والصيانة لفلتر خرطوشة Pentair Clean and Clear Plus، بما في ذلك تعليمات السلامة واستكشاف الأخطاء وإصلاحها والمواصفات الفنية.
قبلview قائمة قطع غيار فلاتر Pentair Clean & Clear RP
قائمة قطع غيار مفصلة لمرشحات Pentair Clean & Clear RP، تتضمن أرقام القطع وأوصافها لمكونات مثل الأغطية، والحلقات المطاطية، والخراطيش، والوصلات، وصمامات التنفيس. وتتضمن رسمًا توضيحيًا تفصيليًا. view وصف الرسم التخطيطي.
قبلview كيفية صيانة فلتر خرطوشة Pentair Clean & Clear Plus بأمان في أربع خطوات رئيسية
دليلٌ لصيانة فلتر خرطوشة Pentair Clean & Clear Plus بأمان، يُبيّن أربع خطوات أساسية للصيانة والتشغيل السليمين لتجنب الإصابات والأضرار. يتضمن تحذيرات أمان هامة تتعلق بأنظمة الضغط العالي.