مقدمة
The Alpena 77259 Dash Litz Blue LED lighting kit provides custom accent lighting for your vehicle's interior. This kit includes four micro LEDs designed for easy installation and operation, enhancing the aesthetic appeal of your vehicle's dashboard or footwell areas.
معلومات السلامة
- Ensure your vehicle's engine is off and the ignition is in the "OFF" position before installation.
- Do not obstruct driver's view or interfere with vehicle controls, airbags, or safety features.
- Avoid installing in areas exposed to extreme heat or moisture.
- Use only with a 12-volt DC power source.
- إذا كنت غير متأكد من أي خطوة من خطوات التثبيت، فاستشر فني سيارات مؤهل.
محتويات الحزمة
Verify that all components are present in your Alpena 77259 Dash Litz kit:
- 4 x Micro Blue LEDs with wiring
- 1 x 12-Volt Power Plug (cigarette lighter adapter) with ON/OFF switch
- Self-adhesive 3M™ foam tape (pre-applied or included for attachment)
Image: Alpena 77259 Dash Litz product packaging, showing the four micro LEDs and the 12V power plug.
Image: The four micro LEDs, their connecting wires, and the 12-volt power plug with an integrated ON/OFF switch, laid out unlit.
الإعداد والتثبيت
- وضع الخطة: Determine the desired locations for the four micro LEDs within your vehicle's interior. Common areas include under the dashboard, footwells, or along console edges. Ensure the wiring can reach the 12-volt power outlet without obstruction.
- سطح نظيف: Thoroughly clean the chosen installation surfaces with an alcohol wipe to remove any dust, dirt, or grease. Allow the surface to dry completely. This ensures optimal adhesion of the foam tape.
- قم بتوصيل مصابيح LED: Peel the backing from the self-adhesive 3M™ foam tape on each micro LED. Carefully press each LED firmly onto the cleaned surface for at least 30 seconds to secure it.
- أسلاك المسار: Neatly route the wiring from each LED to the central 12-volt power plug. Use cable ties or clips (not included) to secure the wires and prevent them from interfering with vehicle operation or being damaged.
- توصيل الطاقة: Insert the 12-volt power plug into your vehicle's cigarette lighter or auxiliary power outlet.
تعليمات التشغيل
- تشغيل الطاقة: Once the 12-volt power plug is inserted into the vehicle's outlet, locate the ON/OFF switch on the power plug. Slide the switch to the "ON" position. The micro LEDs will illuminate with a blue light.
- إيقاف التشغيل: To turn off the LEDs, slide the switch on the 12-volt power plug to the "OFF" position.
Image: The four micro LEDs illuminated with a blue light, connected to their wiring and the 12-volt power plug.
Image: The Alpena Dash Litz LEDs installed in a vehicle, casting a blue glow on the dashboard gauges and surrounding area.
صيانة
- تنظيف: To clean the LED units, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- التصاق: If an LED unit becomes loose, re-secure it using new automotive-grade double-sided adhesive tape. Ensure the surface is clean and dry before re-application.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| المصابيح لا تضيء. |
|
|
| One or more LEDs flicker or are dim. |
|
|
تحديد
- نموذج: Alpena 77259 Dash Litz
- حجم الإدخالtage: 12 فولت تيار مستمر
- نوع المصباح: LED (Micro LEDs)
- لون: أزرق
- الأبعاد (التغليف): حوالي 5.1 × 4 × 1.3 بوصة
- Weight (total package): حوالي 4 أونصة
الضمان والدعم
For warranty information or technical support regarding your Alpena 77259 Dash Litz Blue LED lighting kit, please refer to the contact information provided on the product packaging or visit the official Alpena webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.
You can visit the Alpena Store for more information: Alpena Official Store
