YSI 251398Y

دليل مستخدم مسحوق كاشف الكلور الحر YSI 251398Y DPD

الموديل: 251398Y

المنتج انتهىview

The YSI 251398Y DPD Free Chlorine Reagent Powder is designed for accurate measurement of free chlorine in water samples using a compatible colorimeter. Each pack contains 100 individual powder packs, with each pack formulated for a 5ml sample volume and capable of measuring free chlorine in the range of 0 to 3.5 mg/L.

This reagent utilizes the DPD (N,N-Diethyl-p-phenylenediamine) method, which reacts with free chlorine to produce a magenta color, the intensity of which is proportional to the chlorine concentration and measured by a colorimeter.

معلومات السلامة

Always handle chemical reagents with care. Read the Safety Data Sheet (SDS) for this product before use. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling the reagent powder. Avoid ingestion and contact with skin or eyes. In case of contact, rinse thoroughly with water and seek medical attention if irritation persists.

الإعداد والتحضير

Before beginning any measurements, ensure you have the following:

  • YSI 251398Y DPD Free Chlorine Reagent Powder pack
  • Compatible colorimeter or spectrophotometer
  • ينظفample cells/vials
  • Deionized or distilled water for blanks and dilutions (if necessary)
  • المياه قample to be tested
  • الموقت

خطوات التحضير:

  1. Ensure all glassware and sample cells are clean and free from contamination. Rinse with deionized water before use.
  2. Calibrate your colorimeter according to its specific instruction manual before use.

تعليمات التشغيل

Follow these steps to accurately measure free chlorine using the YSI 251398Y DPD Free Chlorine Reagent Powder:

  1. Sampمجموعة لو: Collect a fresh water sample in a clean sample cell. The required volume is 5ml. Ensure the sample is representative of the water being tested.
  2. Add Reagent: Carefully tear open one YSI 251398Y DPD Free Chlorine Reagent Powder pack. Add the entire contents of the powder pack to the 5ml water sampجنيه في sampلو الخلية.
  3. مزج: كاب ال sample cell and invert several times to thoroughly mix the reagent with the sample. Ensure all powder dissolves completely. A magenta color will develop if free chlorine is present.
  4. وقت رد الفعل: Allow a reaction time of 1 minute for the color to fully develop. Do not exceed 6 minutes, as color fading may occur, leading to inaccurate results.
  5. قياس: Insert the prepared sample cell into your calibrated colorimeter. Follow your colorimeter's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  6. سجل النتائج: Record the measured free chlorine concentration.
Close-up of a silver foil reagent powder packet with 'VARIO.LIT Chlorine FREE-DPD' printed on it.

Image: A single YSI DPD Free Chlorine Reagent Powder packet. This silver foil packet contains the pre-measured reagent powder for a single test. The text "VARIO.LIT Chlorine FREE-DPD" is visible on the packet, indicating its contents and purpose.

الصيانة والتخزين

Proper storage and handling are crucial for maintaining the integrity and effectiveness of the reagent powder:

  • تخزين: Store the reagent powder packs in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store near strong acids or bases.
  • مدة الصلاحية: Refer to the expiration date printed on the packaging. Do not use expired reagents, as they may yield inaccurate results.
  • تصرف: Dispose of used reagent and sample solutions according to local environmental regulations. Consult your local authorities for proper chemical waste disposal procedures.
  • نظافة: Always ensure sample cells and equipment are thoroughly cleaned after each use to prevent cross-contamination.

استكشاف الأخطاء وإصلاحها

If you encounter issues during testing, consider the following common problems and solutions:

مشكلةالسبب المحتملحل
No color developmentNo free chlorine present; Expired reagent; Incorrect sampحجم جنيه.Verify sample contains chlorine; Check reagent expiration date; Ensure 5ml sampحجم جنيه.
Fading color or inaccurate readingReaction time exceeded; Contaminated sample cell; Turbidity in sampليه.Adhere strictly to 1-minute reaction time; Clean sample cells thoroughly; Filter turbid sampليه إذا لزم الأمر.
نتائج غير متسقةImproper mixing; Temperature variations; Colorimeter not calibrated.Ensure complete dissolution of powder; Perform tests at consistent temperatures; Recalibrate colorimeter.

تحديد

  • اسم المنتج: YSI DPD Free Chlorine Reagent Powder
  • رقم الموديل: 251398 سنة
  • Reagent Type: DPD (N,N-Diethyl-p-phenylenediamine)
  • Analyte: الكلور الحر (Cl2)
  • Sampلو الحجم: 5 مل
  • نطاق القياس: 0 إلى 3.5 ملغم/لتر (جزء في المليون)
  • التغليف: Powder packs, 100 per pack
  • الشركة المصنعة: YSI
  • ASIN: B00CMX0PDK
  • أبعاد الحزمة: 8.1 × 6.9 × 1.2 بوصة
  • وزن السلعة: 3.2 أونصات

الضمان والدعم

For information regarding product warranty, technical support, or to purchase additional reagents, please contact YSI customer service or visit the official YSI webراجع وثائق الشراء للاطلاع على شروط وأحكام الضمان المحددة.

YSI Contact Information:

  • Webموقع: www.ysi.com (Please note: This is a placeholder link, refer to official YSI documentation for exact contact details.)

المستندات ذات الصلة - 251398 سنة

قبلview دليل تعليمات جهاز قياس الموصلية طراز YSI 32
دليل التعليمات لجهاز قياس التوصيل YSI Model 32، يوضح وصفه العام ومواصفاته وإجراءات التشغيل والصيانة والمعايرة.
قبلview دليل البدء السريع لجهاز YSI Pro20/Pro20i: المعايرة والتشغيل
دليل موجز لمعايرة وتشغيل أجهزة قياس الأكسجين المذاب YSI Pro20/Pro20i، يشمل تركيب الغشاء، وإعداد المستشعر، ومعايرة البارومتر والأكسجين المذاب، وتعويض الملوحة، وأخذ القياسات. يتضمن خطوات التشغيل الأساسية ومعلومات الاتصال.
قبلview ورقة بيانات السلامة (SDS) لمحلول YSI 3821 المنظم بدرجة حموضة 4.00
صحيفة بيانات السلامة الشاملة (SDS) لمحلول YSI 3821 المنظم بدرجة حموضة 4.00، والتي تتضمن تفاصيل تعريف المنتج، والمخاطر، والتركيب، والإسعافات الأولية، والتعامل، والتخزين، والمعلومات التنظيمية.
قبلview دليل مستخدم أجهزة قياس الأكسجين المذاب ودرجة الحرارة YSI EcoSense DO200A/DO200M
يُقدّم دليل المستخدم هذا تعليمات شاملة لتشغيل وتركيب وصيانة واستكشاف أعطال أجهزة قياس الأكسجين المذاب ودرجة الحرارة YSI EcoSense DO200A وDO200M. ويتضمن تفاصيل حول المواصفات والملحقات ومعلومات الضمان.
قبلview دليل تشغيل وصيانة جهاز إرسال الأقمار الصناعية YSIT-1
دليل مستخدم شامل لجهاز إرسال الأقمار الصناعية YSI طراز YSIT-1، يغطي تشغيله وصيانته وإعداد عتاده ومرجع الأوامر التسلسلية. تشمل التفاصيل إدارة الوقت، وتخزين البيانات، وتنسيق بيانات GOES، والتحكم في جهاز الإرسال RF، ومزامنة نظام تحديد المواقع العالمي (GPS).
قبلview YSI IQ Sensor Net MIQ/CHV PLUS دليل التشغيل
يوفر دليل التشغيل هذا تعليمات مفصلة لوحدة صمام YSI IQ Sensor Net MIQ/CHV PLUS، ويغطي التركيب والإعدادات والصيانة وإرشادات السلامة لرؤوس تنظيف المستشعر التي تعمل بالهواء المضغوط.