YSI 251401Y

دليل مستخدم مسحوق كاشف الكلور الحر YSI 251401Y DPD

For pHotoFlex and 900 Chlorine Colorimeter

1. انتهى المنتجview

The YSI 251401Y DPD Free Chlorine Reagent Powder is an EPA-approved chemical reagent designed for accurate measurement of free chlorine concentrations. This product is specifically formulated for use with YSI pHotoFlex and 900 Chlorine Colorimeter instruments, providing reliable results within a range of 0.02 to 2 mg/L. Each pack contains 100 individual 10ml volume powder packets, ensuring convenience and consistent dosing for laboratory and field applications.

YSI 251401Y DPD Free Chlorine Reagent Powder Packet

Image 1.1: A single packet of YSI 251401Y DPD Free Chlorine Reagent Powder. The label indicates "Powder Packets," "Part Number: 251401Y," "Lot Code: L 01 A," and "Exp: 01.2017." It also includes safety warnings and manufacturer contact information.

2. Safety Information and Handling

This product is intended for professional laboratory and field use only. Adherence to all safety guidelines is critical for proper and safe operation.

3. الإعداد والتحضير

Before beginning any measurement, ensure you have the necessary equipment and that your colorimeter is calibrated according to its specific user manual.

3.1 المواد المطلوبة (غير مشمولة)

3.2 تحضير الكاشف

The YSI 251401Y DPD Free Chlorine Reagent is provided in pre-measured powder packets, eliminating the need for manual weighing or dilution. Each packet contains the precise amount of reagent for a 10ml sampحجم جنيه.

4. Operating Instructions for Free Chlorine Measurement

Follow these steps for accurate free chlorine measurement using the YSI 251401Y DPD Free Chlorine Reagent Powder with a compatible YSI colorimeter.

  1. يجهزampالخلية: Rinse a clean sample cell thoroughly with deionized water, then with a small amount of the sampجنيه ليتم اختبارها.
  2. املأ سampالخلية: املأ sample cell with 10 ml of the water sample to be analyzed. Ensure the sample volume is precise.
  3. Add Reagent: Carefully open one YSI 251401Y DPD Free Chlorine Reagent Powder packet. Add the entire contents of the powder packet to the 10 ml sampلي في الخلية.
  4. مزج: كاب ال sample cell and invert it gently several times to dissolve the powder completely. Avoid shaking vigorously, which can introduce air bubbles. A pink color will develop if free chlorine is present.
  5. وقت رد الفعل: Allow a reaction time of approximately 1 minute for the color to fully develop. Consult your colorimeter's manual for specific reaction time recommendations.
  6. يقيس: Insert the prepared sample cell into the YSI pHotoFlex or 900 Chlorine Colorimeter. Follow the instrument's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  7. سجل النتائج: Record the measurement results immediately.
  8. تنظيف: After measurement, empty the sample cell and rinse it thoroughly with deionized water.

ملحوظة: For best results, perform measurements promptly after sample collection. The DPD method is sensitive to light and temperature; protect samples and reagents from direct sunlight and extreme temperatures.

5. الصيانة والتخزين

Proper storage of the reagent packets is essential to maintain their integrity and ensure accurate results.

6. استكشاف الأخطاء وإصلاحها

This section addresses common issues that may arise during the use of the DPD Free Chlorine Reagent.

مشكلةالسبب المحتملحل
No color development or faint color when chlorine is expected.
  • Expired reagent.
  • Insufficient mixing.
  • Sample pH outside optimal range.
  • Interfering substances in sampليه.
  • Check expiration date; use fresh reagent.
  • Ensure complete dissolution of powder.
  • Verify sample pH is within the colorimeter's specified range for DPD method.
  • Consult colorimeter manual for known interferences.
قراءات غير متسقة أو غير منتظمة.
  • غير لائق sampحجم جنيه.
  • ملوثةampخلايا لو.
  • Air bubbles in sampلو الخلية.
  • Colorimeter calibration issue.
  • Ensure precise 10 ml sampحجم جنيه.
  • Thoroughly clean sample cells before each use.
  • Gently invert to mix, avoid vigorous shaking.
  • Perform colorimeter calibration as per instrument manual.

7. المواصفات

8. الضمان والدعم

For technical support, product inquiries, or to request a Safety Data Sheet (SDS), please contact YSI directly using the information below.

YSI stands behind the quality of its products. Please refer to the official YSI website or contact customer support for detailed warranty information applicable to this reagent.

المستندات ذات الصلة - 251401 سنة

قبلview دليل تعليمات جهاز قياس الموصلية طراز YSI 32
دليل التعليمات لجهاز قياس التوصيل YSI Model 32، يوضح وصفه العام ومواصفاته وإجراءات التشغيل والصيانة والمعايرة.
قبلview دليل البدء السريع لجهاز YSI Pro20/Pro20i: المعايرة والتشغيل
دليل موجز لمعايرة وتشغيل أجهزة قياس الأكسجين المذاب YSI Pro20/Pro20i، يشمل تركيب الغشاء، وإعداد المستشعر، ومعايرة البارومتر والأكسجين المذاب، وتعويض الملوحة، وأخذ القياسات. يتضمن خطوات التشغيل الأساسية ومعلومات الاتصال.
قبلview ورقة بيانات السلامة (SDS) لمحلول YSI 3821 المنظم بدرجة حموضة 4.00
صحيفة بيانات السلامة الشاملة (SDS) لمحلول YSI 3821 المنظم بدرجة حموضة 4.00، والتي تتضمن تفاصيل تعريف المنتج، والمخاطر، والتركيب، والإسعافات الأولية، والتعامل، والتخزين، والمعلومات التنظيمية.
قبلview دليل مستخدم أجهزة قياس الأكسجين المذاب ودرجة الحرارة YSI EcoSense DO200A/DO200M
يُقدّم دليل المستخدم هذا تعليمات شاملة لتشغيل وتركيب وصيانة واستكشاف أعطال أجهزة قياس الأكسجين المذاب ودرجة الحرارة YSI EcoSense DO200A وDO200M. ويتضمن تفاصيل حول المواصفات والملحقات ومعلومات الضمان.
قبلview دليل تشغيل وصيانة جهاز إرسال الأقمار الصناعية YSIT-1
دليل مستخدم شامل لجهاز إرسال الأقمار الصناعية YSI طراز YSIT-1، يغطي تشغيله وصيانته وإعداد عتاده ومرجع الأوامر التسلسلية. تشمل التفاصيل إدارة الوقت، وتخزين البيانات، وتنسيق بيانات GOES، والتحكم في جهاز الإرسال RF، ومزامنة نظام تحديد المواقع العالمي (GPS).
قبلview YSI IQ Sensor Net MIQ/CHV PLUS دليل التشغيل
يوفر دليل التشغيل هذا تعليمات مفصلة لوحدة صمام YSI IQ Sensor Net MIQ/CHV PLUS، ويغطي التركيب والإعدادات والصيانة وإرشادات السلامة لرؤوس تنظيف المستشعر التي تعمل بالهواء المضغوط.