مقدمة
This manual provides essential information for the proper use, setup, operation, and maintenance of your TeeJet AI11005-VS Air Induction Flat Spray Tip. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
The TeeJet AI11005-VS is designed for precision and efficiency in agricultural spraying. It features a durable stainless steel insert and polymer insert holder, crafted to deliver a uniform tapered edge flat spray pattern for consistent coverage.
Image: TeeJet AI11005-VS Air Induction Flat Spray Tip. This image shows the brown-colored spray tip with the model number "AI11005-VS" printed on its side. The tip features a narrow opening at the top for spray dispersion.
يثبت
Before installation, ensure your spraying equipment is clean and free of debris. Verify that the spray tip is compatible with your existing nozzle body and cap.
- Inspect the Tip: Carefully examine the AI11005-VS spray tip for any signs of damage or manufacturing defects.
- Prepare Nozzle Body: Ensure the nozzle body on your sprayer is clean and the gasket or O-ring is in good condition.
- تثبيت نصيحة: Insert the AI11005-VS spray tip into the nozzle body. The tip is designed for a 1/4-inch NPT Female inlet connection.
- Secure with Cap: Place the appropriate nozzle cap over the tip and tighten it securely by hand. Avoid over-tightening, which can damage the tip or cap.
- التحقق من التسريبات: After installation, pressurize the system with water and check for any leaks around the nozzle assembly.
For optimal performance, ensure all components are properly seated and sealed.
تعليمات التشغيل
The TeeJet AI11005-VS is an air induction flat spray tip, designed to produce larger, air-filled droplets for reduced drift while maintaining excellent spray coverage.
Application Rate Chart
Refer to the application rate chart below to determine the appropriate pressure (PSI) and speed (MPH) for your desired flow rate (GPM) and coverage. This chart is crucial for achieving accurate and effective spray applications.
Image: TeeJet Flat Application Rate Chart. This chart provides detailed data for various TeeJet nozzle models, including the AI11005-VS, showing flow rates in Gallons Per Minute (GPM) and Gallons Per Acre (GPA) at different pressures (PSI) and speeds (MPH). It helps users calibrate their sprayers for precise application.
المبادئ التوجيهية العامة للتشغيل:
- نطاق الضغط: Operate within the recommended pressure range for the AI11005-VS tip, which is up to 115 PSI, to ensure proper spray pattern and droplet size.
- Spray Height: Maintain the correct boom height to ensure uniform spray overlap and coverage.
- سرعة: Adjust your ground speed according to the application rate chart to achieve the desired GPA.
- التوافق الكيميائي: Ensure the spray tip material (Stainless Steel, Polymer) is compatible with the chemicals being sprayed.
- Drift Reduction: The air induction design helps reduce drift, but always consider environmental conditions like wind speed and direction.
صيانة
Regular maintenance will extend the life of your TeeJet AI11005-VS spray tip and ensure consistent performance.
- تنظيف: After each use, thoroughly flush the sprayer system with clean water. If chemicals were used, follow the chemical manufacturer's recommendations for cleaning.
- تنظيف الفوهة: If the spray tip becomes clogged, remove it from the nozzle body. Use a soft brush or compressed air to clear any obstructions. Do not use metal objects like wires or pins, as this can damage the orifice and alter the spray pattern.
- تقتيش: Periodically inspect the spray tip for wear, damage, or excessive abrasion, especially the orifice. A worn orifice will result in an altered spray pattern and increased flow rate.
- تخزين: Store spray tips in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| نمط الرش غير المتساوي | Clogged orifice; Worn tip; Incorrect pressure; Incorrect boom height. | Clean the tip; Replace worn tip; Adjust pressure to recommended range; Adjust boom height. |
| انخفاض معدل التدفق | Partial clog; Insufficient pump pressure. | Clean the tip; Check pump and pressure regulator. |
| Excessive Drift | Too high pressure; Too small droplet size; High wind conditions. | Reduce pressure (if possible); Use larger droplet size tips (if applicable); Avoid spraying in high winds. |
| Leaking at Nozzle Body | Damaged or missing gasket/O-ring; Loose cap. | Replace gasket/O-ring; Tighten cap securely. |
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | AI11005-VS |
| ماركة | تيجيت |
| مادة | Stainless Steel, Polymer |
| النهاية الخارجية | الفولاذ المقاوم للصدأ |
| نوع اتصال المدخل | 1/4-inch NPT Female |
| نوع توصيل المنفذ | 1/4-inch NPT Female |
| الحد الأقصى لضغط التشغيل | 115 رطل لكل بوصة مربعة |
| عدد المنافذ | 2 |
| وزن العنصر | 0.16 أونصات |
| رمز المنتج الموحد | 736354001249 |
الضمان والدعم
Specific warranty information for the TeeJet AI11005-VS Air Induction Flat Spray Tip is not provided in the product data. For detailed warranty terms and conditions, please refer to the official TeeJet website or contact TeeJet customer support directly.
For technical support, replacement parts, or further inquiries, please contact TeeJet customer service through their official channels. Always provide your product model number (AI11005-VS) when seeking support.
You can find more information and contact details on the official TeeJet webموقع: www.teejet.com
