دليل تعليمات وصلة خرطوم بانجو HM150 مقاس 1-1/2 بوصة × 1-1/2 بوصة

مقدمة

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Banjo HM150 1-1/2" Hose Barb X 1-1/2" Hose Barb fitting. Please read this manual thoroughly before use to ensure safe and effective application of the product.

المنتج انتهىview

الميزات الرئيسية

• مقاس: 1-1/2" nominal diameter for hose connections.
• مادة: Constructed from glass-reinforced polypropylene for enhanced durability and chemical resistance.
• متانة: Heavy-duty design, comparable to Schedule 80 piping standards.
• وزن: Lightweight construction combined with excellent strength characteristics.
• تصنيف الضغط: Capable of withstanding pressure up to 150 P.S.I. at 70°F (21°C).

عناصر

The Banjo HM150 is a single-piece hose barb fitting designed to connect two 1-1/2 inch hoses. It features barbed ends on both sides for secure hose attachment.

Image: A black Banjo HM150 1-1/2 inch hose barb fitting, showing the ribbed barb ends on both sides and the central body with 'BANJO' embossed.

الإعداد والتثبيت

1. تحضير: Ensure that the hoses to be connected are of the correct 1-1/2 inch inner diameter and are clean and free of debris.
2. التشحيم (اختياري): For easier installation, a small amount of water or a compatible lubricant can be applied to the barb ends of the fitting and the inside of the hose. Avoid petroleum-based lubricants if not compatible with hose material.
3. مرفق خرطوم: Firmly push one end of the hose onto one barb of the fitting until it is fully seated past all barbs. Repeat for the second hose on the other barb.
4. اتصال آمن: استخدم خرطومًا مناسبًاamps (e.g., worm gear clampق، الفرقة clamps) on both ends of the connection, positioned over the hose and behind the last barb, to prevent accidental disconnection and ensure a leak-free seal. Tighten clamps according to manufacturer specifications.
5. تقتيش: Visually inspect both connections to ensure the hoses are fully seated and the clampيتم تأمينها بشكل صحيح.

تعليمات التشغيل

Once installed, the Banjo HM150 hose barb fitting functions as a passive connector within a fluid transfer system. Ensure that the system's operating pressure and temperature do not exceed the fitting's rated limits (150 P.S.I. at 70°F). Regular monitoring of the connections during operation is recommended to detect any leaks or signs of stress.

صيانة

• التفتيش الدوري: Periodically inspect the fitting and hose connections for any signs of wear, cracks, discoloration, or leaks.
• تنظيف: Clean the fitting as needed using mild soap and water. Avoid harsh chemicals that may degrade polypropylene.
• تخزين: If removed from service, store the fitting in a clean, dry place away from direct sunlight and extreme temperatures.
• الاستبدال: Replace the fitting if any damage or significant wear is observed to prevent system failure.

استكشاف الأخطاء وإصلاحها

Leaks at Connection Points

• سبب: Improperly seated hose, loose or incorrect hose clamp, damaged hose, or damaged fitting.
• حل: Ensure hose is fully seated over all barbs. Tighten hose clamps securely. Inspect hose and fitting for damage; replace if necessary.

Difficulty Attaching Hose

• سبب: Hose inner diameter is too small, or insufficient lubrication.
• حل: Verify hose size. Apply water or compatible lubricant to the barb and hose interior.

تحديد

الضمان والدعم

For information regarding product warranty, technical support, or replacement parts, please contact Banjo Corporation directly or refer to their official webموقع. احتفظ بإيصال الشراء الخاص بك لمطالبات الضمان.