1. انتهى المنتجview
The Schlage F51A Georgian 505 is a single cylinder entry door lock knobset designed for residential use. This lock provides security with a key entry from the outside and a turn-button for locking/unlocking from the inside. The interior knob always remains free for immediate exit (panic-proof function). The unit is non-handed and field reversible, allowing for flexible installation on left or right-handed doors.
2. محتويات العبوة
تأكد من وجود جميع المكونات قبل البدء بالتثبيت. في حال وجود أي أجزاء مفقودة أو تالفة، لا تتابع عملية التثبيت وتواصل مع خدمة العملاء.
- Exterior Knob Assembly (with key cylinder)
- Interior Knob Assembly (with turn-button)
- مجموعة مزلاج القفل
- Strike Plate (Part 10-063, supplied with Square Corner and Round Corner Full Lip Strike Plates, Dimensions: 2-1/4" x 1-5/8")
- Faceplates (Part 16-211, supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates)
- مسامير التثبيت
- مفاتيح (عادةً 2)
- قالب التثبيت (إذا كان متضمنًا)
3. معلومات السلامة
اقرأ جميع التعليمات بعناية قبل التركيب والاستخدام. احتفظ بهذا الدليل للرجوع إليه مستقبلًا.
- احرص دائمًا على ارتداء معدات السلامة المناسبة، مثل نظارات السلامة، أثناء التركيب.
- Use the correct tools for the job to prevent damage to the lock or injury.
- Ensure the door is properly prepared and aligned before installing the lock.
- لا تُجبر المكونات على التركيب. إذا لم تتناسب القطع، فأعد مراجعة التعليمات.
- أبقِ الأجزاء الصغيرة بعيدًا عن متناول الأطفال لمنع مخاطر الاختناق.
- مهم: Do not use prints made from this website or any digital source to mark distances for drilling. Due to individual printers and display settings, dimensions on installation instructions may not print or display at an accurate scale. Always use the physical template provided with the product or measure carefully.
4. دليل التثبيت
This section provides general steps for installing the Schlage F51A Georgian 505 entry door lock. For detailed, step-by-step instructions, refer to the specific installation template and guide included in your product packaging.
4.1 تحضير الباب
- Ensure the door is properly bored for a standard door lock (typically 2-1/8 inch cross bore and 1 inch edge bore).
- Measure the backset (distance from the door edge to the center of the cross bore). Adjust the latch bolt if necessary to fit 2-3/8 inch or 2-3/4 inch backsets.
- Chisel out a mortise for the latch faceplate and strike plate on the door edge and frame, respectively, if not already present.
4.2 Install the Latch Bolt
- Insert the latch bolt into the edge bore of the door, ensuring the bevel of the latch faces the door frame.
- Secure the latch bolt with the provided screws. Choose the appropriate faceplate (1/4" Round Corner, Square Corner, or Drive-In) to match your door preparation.
4.3 Install the Knobs
- Insert the exterior knob assembly through the cross bore, ensuring the spindle engages with the latch mechanism.
- Place the interior knob assembly onto the spindle, aligning the mounting posts with the holes in the exterior assembly.
- Secure the interior and exterior assemblies together using the provided mounting screws. Tighten screws evenly to prevent binding.
- ملحوظة: The unit is non-handed and field reversible, meaning it can be installed on either left or right-handed doors without modification.
4.4 Install the Strike Plate
- Close the door and mark the position where the latch bolt strikes the door frame.
- Install the strike plate (Part 10-063) on the door frame, aligning it with the latch bolt. Use the appropriate strike plate (Square Corner or Round Corner Full Lip) for your frame.
- Secure the strike plate with the provided screws.
4.5 عملية الاختبار
After installation, test the lock's function with the door open and closed to ensure smooth operation.
5. التشغيل
5.1 Locking and Unlocking from the Exterior
- To unlock: Insert the key into the keyway and turn it.
- To lock: Turn the key to the locked position and remove it. The exterior knob will then be rigid.
5.2 القفل والفتح من الداخل
- To unlock: Rotate the turn-button on the interior knob.
- To lock: Rotate the turn-button on the interior knob to the locked position.
- Panic-Proof Feature: The interior knob always remains free, allowing for immediate exit even when the lock is engaged. Turning the interior knob will retract the latch bolt.
6. الصيانة
Proper maintenance ensures the longevity and smooth operation of your Schlage lock.
- تنظيف: قم بتنظيف الجزء الخارجي من القفل باستخدام قطعة قماش ناعمة.amp القماش. تجنب استخدام المنظفات الكاشطة أو المذيبات أو المواد الكيميائية القاسية، لأنها قد تؤدي إلى إتلاف الطبقة النهائية.
- تشحيم: Periodically apply a small amount of graphite-based lubricant (do not use oil-based lubricants) into the keyway and the latch mechanism to ensure smooth operation.
- تقتيش: Regularly check all mounting screws for tightness. If the lock feels loose, gently tighten the screws.
- العناية النهائية: The Lifetime Bright Brass finish is designed for durability. However, prolonged exposure to harsh weather or chemicals can affect its appearance.
7. استكشاف الأخطاء وإصلاحها
If you encounter issues with your Schlage F51A Georgian 505 lock, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| المفتاح لا يدور أو أنه صلب. | Dirt in keyway, worn key, or misaligned cylinder. | Clean keyway with compressed air. Apply graphite lubricant. Try a spare key. If issue persists, contact support. |
| المقبض مرتخي أو مهتز. | براغي التثبيت فضفاضة. | قم بربط براغي التثبيت على مجموعة المقبض الداخلي. |
| Latch bolt does not retract fully or binds. | Misalignment of lock components or strike plate. | Check alignment of latch bolt and strike plate. Ensure mounting screws are not overtightened, causing binding. Lubricate latch mechanism. |
| الباب لا يُغلق أو يُحكم إغلاقه بشكل صحيح. | Strike plate misalignment or door sag. | Adjust the strike plate position on the door frame. Check door hinges for sag. |
8. المواصفات
- رقم الموديل: F51A GEO 505
- ماركة: شلاج
- يكتب: Single Cylinder Entry Door Lock Knobset
- ينهي: Lifetime Bright Brass
- مادة: نحاس
- أسلوب: Traditional (Georgian)
- المميزات الخاصة: Key Lock, Panic-Proof Interior Knob
- أبعاد المنتج: حوالي 4 × 6 × 5 بوصة
- وزن السلعة: حوالي 1.2 رطل
- البطاريات المطلوبة: لا
- بلد المنشأ: المكسيك
9. الضمان والدعم
Schlage products are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty information included with your product packaging or visit the official Schlage webموقع.
If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact Schlage Customer Support. Contact information can typically be found on the Schlage webالموقع أو في وثائق المنتج الخاص بك.
الموارد المتاحة على الإنترنت: www.schlage.com
