Unitech MS840 Rugged Handheld Laser Scanner
Model: MS840-SUBBGC-SG
1. المقدمة
The Unitech MS840 is a high-performance, rugged handheld laser scanner designed for demanding environments. It offers reliable and accurate barcode scanning capabilities, making it ideal for various applications including retail, logistics, and inventory management. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MS840 scanner.
Image 1.1: The Unitech MS840 Rugged Handheld Laser Scanner. This image shows the dark blue and light blue scanner from a slight angle, highlighting its ergonomic design and the laser scanning window at the front.
2. معلومات السلامة
Please read all safety instructions carefully before using the Unitech MS840 scanner to prevent injury or damage to the device.
- سلامة الليزر: This device uses a Class 1 laser. Do not stare directly into the laser beam or point it at others.
- السلامة الكهربائية: Use only the provided USB cable. Do not expose the device to water or extreme temperatures.
- التعامل: The MS840 is rugged, but avoid dropping it from excessive heights or subjecting it to severe impacts.
- تصرف: تخلص من الجهاز ومكوناته وفقًا للوائح البيئية المحلية.
3. محتويات العبوة
تأكد من وجود جميع العناصر في الحزمة الخاصة بك:
- Unitech MS840 Handheld Laser Scanner
- كابل توصيل USB
- دليل البدء السريع (إن وجد)
4. الإعداد
Follow these steps to set up your Unitech MS840 scanner:
- قم بتوصيل كبل USB:
Insert the smaller end of the USB cable into the port at the base of the MS840 scanner. Connect the larger end of the USB cable to an available USB port on your computer (Laptop or Desktop).
- تثبيت برنامج التشغيل:
The MS840 is typically a plug-and-play device and should be recognized automatically by most operating systems. If prompted, allow your system to install the necessary drivers. No additional software installation is usually required for basic operation.
- الاختبار الأولي:
Open a text editor or a program where you can input text (e.g., Notepad, Word). Scan a known barcode. If the setup is successful, the barcode data should appear in the opened application.
5. تشغيل الماسح الضوئي
The Unitech MS840 is designed for simple and efficient barcode scanning.
- تشغيل الطاقة: The scanner powers on automatically when connected to a powered USB port.
- الهدف: Hold the scanner with the scanning window facing the barcode. Press the trigger button located on the handle. A red laser line will project from the scanning window.
- مسح: Position the laser line across the entire barcode. Ensure the barcode is flat and well-lit.
- مؤشر نجاح المسح: Upon a successful read, the scanner will typically emit an audible beep and/or an LED indicator will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
- الباركود المدعومة: The MS840 is a laser scanner, primarily designed for 1D (linear) barcodes.
6. الصيانة
Proper maintenance ensures the longevity and optimal performance of your MS840 scanner.
- تنظيف نافذة المسح الضوئي:
نظّف نافذة المسح الضوئي بانتظام بقطعة قماش ناعمة وخالية من الوبر. لإزالة الأوساخ العنيدة، امسحها برفق.ampen the cloth with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials.
- النظافة العامة:
امسح الجزء الخارجي من الماسح الضوئي بقطعة قماش ناعمة و...amp القماش. تجنب دخول الرطوبة إلى أي فتحات.
- العناية بالكابلات:
تجنب ثني أو ليّ كابل USB بشكل مفرط. خزّن الكابل بشكل منظم عند عدم استخدامه لمنع تلفه.
- تخزين:
قم بتخزين الماسح الضوئي في بيئة نظيفة وجافة بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى عندما لا يكون قيد الاستخدام.
7. استكشاف الأخطاء وإصلاحها
If you encounter issues with your MS840 scanner, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الماسح الضوئي لا يعمل. | كابل USB غير متصل بشكل صحيح أو منفذ USB معيب. | تأكد من توصيل كابل USB بإحكام بكل من الماسح الضوئي والكمبيوتر. جرب منفذ USB آخر على جهاز الكمبيوتر الخاص بك. |
| الماسح الضوئي لا يقرأ الباركود. | Barcode damaged, poor lighting, incorrect aiming, or unsupported barcode type. | Ensure the barcode is clear and undamaged. Provide adequate lighting. Aim the laser line directly across the barcode. Verify it's a 1D barcode. Clean the scanning window. |
| Scanned data not appearing on screen. | Application not in focus, incorrect keyboard layout, or driver issue. | Click into the text field of the application where you want the data to appear. Restart the application or computer. Check device manager for driver status. |
| Scanner beeps but no data. | Data transmission issue or application not ready. | Ensure the cursor is active in the target application. Try scanning into a simple text editor like Notepad to isolate the issue. |
If the problem persists after trying these solutions, please contact Unitech customer support.
8. المواصفات
Detailed technical specifications for the Unitech MS840 scanner:
| ميزة | وصف |
|---|---|
| ماركة | يونيتك |
| نموذج | MS840-SUBBGC-SG |
| نوع الماسح الضوئي | Hand-held Laser Scanner |
| نوع عنصر المسح الضوئي | الليزر |
| Scan Speed / Rate | 100 scans/second (100 fps) |
| تكنولوجيا الاتصال | كابل (USB) |
| نوع الواجهة | USB |
| الأجهزة المتوافقة | كمبيوتر محمول ، سطح المكتب |
| أبعاد المنتج (الطول × العرض × الارتفاع) | 2.54 × 2.54 × 2.54 سم (25 × 25 × 25 مليمترًا) |
| وزن العنصر | 454 جرام (453.59 جرام) |
| البطاريات المطلوبة | لا |
| ASIN | B00C4OGY2I |
| رقم تعريف التجارة العالمية (GTIN) | 00132017875439 |
| أول تاريخ متاح | 30 أبريل 2013 |
9. الضمان والدعم
Unitech products are manufactured to high quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Unitech webموقع.
For technical support, service, or further inquiries, please contact Unitech customer service through their official channels. Have your model number (MS840-SUBBGC-SG) and ASIN (B00C4OGY2I) ready when contacting support.
Note: Contact information for Unitech can typically be found on their official webالموقع أو في عبوة المنتج.
