دليل مستخدم قارئ Promag PCR-330M USB RFID

مقدمة

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Promag PCR-330M USB RFID Reader. The PCR-330M is a 13.56 MHz (MIFARE) keyboard-mode RFID reader designed for various applications requiring efficient and reliable card reading. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

الشكل 1: Promag PCR-330M USB RFID Reader. This image shows the top view of the white Promag PCR-330M RFID reader. It features a prominent oval-shaped blue button in the center, flanked by two small indicator lights (one grey, one green). A white USB cable extends from the top edge of the device. The "PROMAG" logo is subtly embossed near the top. The device has a sleek, slightly curved design with blue accents on its sides.

يثبت

Follow these steps to set up your Promag PCR-330M RFID Reader:

1. فك الجهاز: Carefully remove the PCR-330M reader from its packaging. Ensure all components are present.
2. الاتصال بجهاز الكمبيوتر: Plug the USB cable of the PCR-330M into an available USB port on your computer. The device is plug-and-play and typically does not require additional driver installation for standard keyboard-mode operation.
3. تشغيل الطاقة: The device will draw power directly from the USB port. The indicator lights on the reader will illuminate briefly upon successful connection.
4. وظيفة الاختبار: Open a text editor (e.g., Notepad, Word) or any application where text input is possible. Place a compatible 13.56 MHz RFID card (e.g., MIFARE) near or on the reader's sensing area. The card's ID should appear as typed text in the open application.

تعليمات التشغيل

The Promag PCR-330M operates in keyboard emulation mode, meaning it sends card data as if it were typed on a keyboard.

• وضع البطاقة: Position the RFID card directly on the reader's surface or within close proximity (typically 0-5 cm) for optimal reading.
• إخراج البيانات: Once a card is read, its unique identifier (UID) or programmed data will be outputted to the active cursor position in any open application.
• أضواء المؤشر:
  • الصمام الأخضر: Indicates successful card reading.
  • Grey LED: Indicates power or standby status.
• Multiple Reads: To read the same card again, remove it from the sensing area and then place it back.

صيانة

To ensure the longevity and optimal performance of your PCR-330M reader, follow these maintenance guidelines:

• تنظيف: Use a soft, dry, lint-free cloth to clean the exterior of the device. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface.
• تخزين: قم بتخزين الجهاز في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• التعامل: Avoid dropping the device or subjecting it to strong impacts. Do not attempt to open the casinز، لأن هذا سيؤدي إلى إبطال الضمان.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your Promag PCR-330M, refer to the following common problems and solutions:

إذا استمرت المشكلة بعد تجربة هذه الحلول، فيرجى الاتصال بدعم العملاء.

تحديد

معلومات الضمان

Promag products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official Promag webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة مطالبات الضمان.

دعم العملاء

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Promag customer support.

• الشركة المصنعة: Promag
• Webموقع: www.promag.com.tw (Note: This is a general placeholder for a manufacturer's website. Please refer to your product packaging for the most accurate support contact information.)
• البريد الإلكتروني/رقم الهاتف: الرجوع إلى المسؤول website or product documentation for specific contact details.