بيكو 35267

PIKO G Scale Reed Switch Assembly (Model 35267) Instruction Manual

الشركة المصنعة: بيكو

مقدمة

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your PIKO G Scale Reed Switch Assembly, Model 35267. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

الإعداد والتثبيت

The PIKO G Scale Reed Switch Assembly (35267) is designed for use with G scale model train layouts to detect the presence of a train. It typically works by sensing a magnet attached to the underside of a locomotive or rolling stock.

عناصر:

خطوات التثبيت:

  1. تحديد الموقع: Determine the desired location on your G scale track where train detection is required. This could be for signaling, automated accessories, or track occupancy indication.
  2. Mount the Reed Switch: Securely attach the reed switch assembly to the track bed or adjacent to the track. Ensure the switch is positioned so that a magnet on the train will pass directly over or very close to it. The exact mounting method may vary based on your layout and the specific design of the assembly.
  3. توصيل الأسلاك: Connect the reed switch to your control system, signal, or accessory. Refer to the wiring diagram of your specific control unit for correct connections. Reed switches typically have two wires and act as a simple open/close contact.
  4. وظيفة الاختبار: Place a locomotive or car with a magnet over the installed reed switch. Verify that the connected accessory or signal responds as expected. Adjust the position of the reed switch or magnet if necessary to achieve reliable detection.
PIKO G Scale Reed Switch Assembly 35267

Image: PIKO G Scale Reed Switch Assembly (Model 35267). This image shows the general appearance of the reed switch assembly, which is used to detect the presence of G scale model trains on a track.

تعليمات التشغيل

The PIKO G Scale Reed Switch Assembly operates passively, meaning it does not require external power to function as a switch. It is activated by a magnetic field.

Ensure that the magnets on your rolling stock are strong enough and positioned correctly to reliably trigger the reed switch.

صيانة

The PIKO G Scale Reed Switch Assembly is designed for durability and requires minimal maintenance.

استكشاف الأخطاء وإصلاحها

If your reed switch assembly is not functioning as expected, consider the following:

مشكلة السبب المحتمل حل
Switch does not activate.
  • Magnet on train is too weak or improperly positioned.
  • Reed switch is too far from the magnet.
  • Wiring connection is loose or incorrect.
  • Reed switch is faulty.
  • Ensure a strong magnet is attached to the train, directly above the switch.
  • Adjust the reed switch position closer to the track/magnet.
  • تحقق من جميع توصيلات الأسلاك للتأكد من سلامتها وصحتها.
  • Test the reed switch with a separate magnet; if it still doesn't activate, it may need replacement.
Switch activates erratically.
  • Interference from other magnetic sources.
  • Loose mounting, causing vibration.
  • Weak or inconsistent magnet on train.
  • Ensure no other strong magnets are nearby.
  • Securely mount the reed switch to prevent movement.
  • Replace or reinforce the train magnet.

تحديد

الضمان والدعم

For specific warranty information, please refer to the documentation provided with your purchase or contact your retailer. PIKO products are generally covered by a manufacturer's warranty against defects in materials and workmanship.

For technical support or further assistance, please contact PIKO customer service or your authorized PIKO dealer. Contact details can typically be found on the official PIKO webتغليف الموقع أو المنتج.

المستندات ذات الصلة - 35267

قبلview نظام PIKO G الرقمي: انتهىview ومكونات قطارات النماذج G-Scale
استكشف نظام PIKO G الرقمي، وهو حل شامل لتشغيل قطارات نموذجية متطورة بمقياس G. تعرّف على المحطة المركزية الرقمية، والمعززات، ووحدات فك تشفير المفاتيح، وجهاز التحكم عن بُعد Navigator، وغيرها من الميزات للتحكم السلكي واللاسلكي.
قبلview قاطرة PIKO الكهربائية Rh 1000 NS: دليل التعليمات وقطع الغيار (رقم 97504)
تعليمات مفصلة لقاطرة PIKO HO scale Electric Locomotive Rh 1000 NS (الطراز رقم 97504)، بما في ذلك التجميع والتفكيك وفك التشفير وتركيب الصوت، وقائمة شاملة لقطع الغيار.
قبلview جهاز فك تشفير الصوت PIKO SmartDecoder XP Sound Next18 للقاطرة الكهربائية BR 243 TT - جهاز فك تشفير الصوت متعدد البروتوكولات
المواصفات والميزات التفصيلية لجهاز PIKO SmartDecoder XP Sound Next18، وهو جهاز فك تشفير صوتي متعدد البروتوكولات لقاطرات كهربائية بمقياس TT، يوفر صوتًا متقدمًا، وتحكمًا في المحرك، وتوافقًا مع النظام الرقمي.
قبلview دليل تركيب وتشغيل جهاز فك التشفير متعدد البروتوكولات PIKO 76790
دليل شامل لتثبيت وبرمجة وتشغيل جهاز فك التشفير متعدد البروتوكولات PIKO 76790. تعرّف على توافق DCC و Motorola، وتنظيم الحمل، وتبديل أحذية الالتقاط، والمواصفات الفنية لهواة قطارات النماذج.
قبلview نظام التحكم الرقمي PIKO SmartControlwlan - دليل المالك
دليل شامل لمالك نظام PIKO SmartControlwlan DCC، يشرح بالتفصيل كيفية الإعداد والتشغيل والتحكم في القاطرة والملحقات، وبرمجة المسارات، والإعدادات، لهواة السكك الحديدية النموذجية. تعلم كيفية التحكم في القطارات والمفاتيح والإشارات وبرمجة عدادات السرعة باستخدام هذا النظام سهل الاستخدام.
قبلview نموذج قاطرة كهربائية PIKO RH S489.0 TT: التعليمات وقطع الغيار
دليل شامل لطراز قاطرة PIKO RH S489.0 TT الكهربائية، يتضمن تعليمات مفصلة، ​​ومواصفات فنية، وتوزيعات وظائف، وقائمة كاملة بقطع الغيار. يتضمن معلومات عن جهاز PIKO SmartDecoder XP Sound Next18.