Project E Beauty Pro High Frequency Galvanic Roller Beauty Facial Skin Care Spa Salon Machine

1. انتهى المنتجview

The Project E Beauty Pro High Frequency Galvanic Roller is a professional-grade device designed for facial skin care. It combines high frequency and galvanic technologies to help improve skin texture, circulation, and product absorption. This machine is suitable for use in spa, salon, or home settings, offering a comprehensive solution for various skin concerns.

الصورة 1.1: The Project E Beauty Pro High Frequency Galvanic Roller machine, showcasing its main unit with control knobs and various attachments including the roller, glass electrodes, and power cord.

2. احتياطات السلامة

Before operating the device, please read and understand all safety instructions. Improper use can lead to injury or damage to the device.

• تأكد دائمًا من جفاف يديك قبل توصيل الجهاز أو فصله.
• لا تستخدم الجهاز بالقرب من الماء أو في دamp البيئات.
• احتفظ بالجهاز بعيدًا عن متناول الأطفال.
• Consult a physician before use if you have any pre-existing medical conditions, especially heart conditions, epilepsy, or are pregnant.
• لا تستخدمه على الجلد المتشقق أو المتهيج أو المصاب.
• تجنب ملامسة العينين بشكل مباشر.
• افصل الجهاز في حالة عدم استخدامه وقبل التنظيف.
• Use only the accessories provided or approved by Project E Beauty.

3. الإعداد

1. فك التعبئة: Carefully remove all components from the packaging. Verify that all parts are present: main unit, power cord, high frequency electrodes (various shapes), and galvanic roller/accessories.

2. الموقع: Place the main unit on a stable, flat, and dry surface, away from direct sunlight or heat sources.

3. توصيل الطاقة: Insert the power cord into the power input port on the back of the main unit, then plug the other end into a suitable electrical outlet.

4. Attaching Electrodes/Roller:

   • For High Frequency: Gently insert the desired glass electrode into the high frequency handle. Ensure it is securely seated.
   • For Galvanic: Connect the galvanic roller or other galvanic accessories to their respective ports on the main unit.

5. Ensure all connections are firm before powering on the device.

4. تعليمات التشغيل

This section details the operation of both High Frequency and Galvanic functions.

4.1. High Frequency Operation

1. تحضير: Ensure the skin is clean and dry. Apply a thin layer of gauze or a suitable high-frequency cream/serum to the treatment area.

2. تشغيل الطاقة: Turn on the main power switch. Select the High Frequency function.

3. إدخال القطب الكهربائي: Insert the chosen glass electrode into the high frequency handle. Ensure the intensity knob is at its lowest setting before starting.

4. طلب: Place the electrode directly onto the skin before turning up the intensity to avoid a mild shock. Slowly increase the intensity using the High Frequency intensity knob until a comfortable sensation is felt.

5. علاج: Move the electrode in circular motions over the treatment area. Typical session duration is 5-10 minutes per area.

6. انتهاء: Lower the intensity to zero, then remove the electrode from the skin before turning off the High Frequency function.

4.2. Galvanic Operation

1. تحضير: Cleanse the skin thoroughly. Apply a conductive gel or solution suitable for galvanic treatments. Ensure the client holds the passive electrode (if applicable) or that the active electrode is properly grounded.

2. تشغيل الطاقة: Turn on the main power switch. Select the Galvanic function.

3. Polarity Selection: Select the desired polarity (positive or negative) based on the treatment goal (e.g., desincrustation or iontophoresis).

4. طلب: Place the galvanic roller or chosen active electrode onto the skin. Slowly increase the intensity using the Galvanic intensity knob until a comfortable sensation is felt. The client should feel a slight tingling.

5. علاج: Glide the electrode smoothly over the skin, maintaining constant contact. Avoid lifting the electrode from the skin while the current is active. Typical session duration is 10-15 minutes.

6. انتهاء: Lower the intensity to zero, then remove the electrode from the skin before turning off the Galvanic function.

5. الصيانة

تضمن الصيانة المناسبة طول عمر جهازك وأداءه الأمثل.

• تنظيف الوحدة الرئيسية: امسح الجزء الخارجي من الوحدة الرئيسية بقطعة قماش ناعمة.amp لا تستخدم منظفات كاشطة أو تغمر الوحدة في الماء.

• Cleaning Electrodes/Accessories:

  • Glass Electrodes: Gently wipe glass electrodes with a soft cloth dampened with alcohol or a mild disinfectant. Allow them to air dry completely before storage. Handle with care as they are fragile.
  • Galvanic Roller/Metal Parts: Clean with a mild disinfectant solution and wipe dry.

• تخزين: Store the device and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Keep all components in their original packaging or a protective case to prevent damage.

• العناية بالحبل: Do not wrap the power cord tightly around the unit. Avoid kinking or twisting the cord.

6. استكشاف الأخطاء وإصلاحها

إذا واجهت مشكلات مع جهازك، فراجع المشكلات والحلول الشائعة التالية:

إذا استمرت المشكلة بعد تجربة هذه الحلول، يرجى الاتصال بدعم عملاء Project E Beauty للحصول على مزيد من المساعدة.

7. المواصفات

8. الضمان والدعم

Project E Beauty products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Project E Beauty webموقع.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Project E Beauty customer service. Contact details can typically be found on the product packaging or the official brand webموقع.

Note: Always purchase genuine Project E Beauty products from authorized retailers to ensure warranty validity and product authenticity.