مقدمة
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.
معلومات السلامة
- تحذير: Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
- حذر: Halogen bulbs operate at high temperatures. Allow the bulb to cool completely before handling.
- حذر: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use clean gloves or a clean cloth.
- تحذير: Dispose of old bulbs responsibly according to local regulations.
المنتج انتهىview
The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.
الشكل 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.
الإعداد والتثبيت
- تحضير: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
- الوصول إلى المصباح: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
- فصل الأسلاك: افصل الموصل الكهربائي بعناية من الجزء الخلفي للمصباح القديم.
- إزالة المصباح القديم: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
- تركيب المصباح الجديد: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
- إعادة توصيل الأسلاك: أعد توصيل الموصل الكهربائي بالمصباح الجديد.
- وظيفة الاختبار: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
- إعادة التجميع: أعد تركيب أي أغطية أو مكونات تمت إزالتها للوصول إلى المصباح.
ملحوظة: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.
عملية
The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.
صيانة
- تنظيف: If the headlight lens becomes dirty, clean it with a soft cloth and appropriate automotive cleaning solution. Avoid abrasive cleaners.
- تقتيش: Periodically check your headlights for proper function. If a bulb appears dim or has failed, replace it promptly.
- التعامل: When replacing bulbs, always handle them by the base to avoid contaminating the glass.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| المصباح لا يضيء. | Incorrect installation, loose connection, blown fuse, faulty wiring, or defective bulb. | Check bulb seating and electrical connection. Inspect vehicle's fuse box for a blown headlight fuse. Consult a qualified mechanic if wiring is suspected. Replace bulb if defective. |
| المصباح خافت أو يومض. | Aging bulb, poor electrical connection, or voltagه القضية. | Replace both bulbs for optimal performance. Check connections. Consult a mechanic for voltagقضايا البريد. |
| المصباح يحترق بسرعة. | المجلدtage spikes, touching the glass during installation, or excessive vibration. | Ensure proper installation without touching the glass. Have vehicle's electrical system checked for voltagالمخالفات ه. |
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | إيكو |
| رقم الموديل | ح1155 |
| نوع المصباح | الهالوجين |
| المجلدtage | 12.8 Volts (Nominal), 13.2 Volts (Max) |
| واتtage | 55 واط |
| سطوع | 1345 لومن |
| Average Operating Life | 800 ساعة |
| نوع القاعدة | Right-Angle Pre-Focus H11 |
| حجم المصباح | T3-1/4 |
| وزن العنصر | 0.8 أونصات |
| رمز المنتج الموحد | 031293811646 |
الضمان والدعم
For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.
Manufacturer: EIkO Auto Lighting
