دليل تعليمات ثريا بروجرس لايتنج إنسباير التقليدية ذات 9 مصابيح P4638-09

مقدمة

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Progress Lighting Inspire Collection 9-Light Off-White Linen Shade Traditional Chandelier in Brushed Nickel. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: The Inspire Collection 9-Light Chandelier featuring a brushed nickel finish and off-white linen shades.

معلومات السلامة

تحذير: To reduce the risk of fire, electric shock, or personal injury, always turn off the main power supply at the circuit breaker before installation, removal, or servicing. This product requires professional installation. Always consult a qualified electrician if you are unsure about the installation process.

تحذير بشأن الاقتراح 65: قد يحتوي هذا المنتج على مواد كيميائية معروفة في ولاية كاليفورنيا بأنها تسبب السرطان والعيوب الخلقية أو غيرها من الأضرار التناسلية. اغسل يديك بعد المناولة.

• Ensure all electrical connections are in accordance with local codes and ordinances.
• استخدم فقط نوع المصباح وواط المحددينtagلتجنب ارتفاع درجة الحرارة.
• Do not hang anything from the fixture.

محتويات الحزمة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

• Chandelier fixture assembly
• 9 Off-white linen shades
• Ceiling chain (6 feet of 9 gauge chain supplied)
• التمديدات الكهربائية
• Mounting hardware (may require additional screws not included)
• ورقة التثبيت

الإعداد والتثبيت

Professional installation is recommended for this chandelier. Follow these general steps, referring to the included installation sheet for specific details.

1. التحضير للتثبيت

• قم بإيقاف تشغيل الطاقة عند قاطع الدائرة.
• Carefully unpack the fixture and components.
• Determine the desired hanging height. For an 8-foot ceiling, the bottom of the chandelier should be 30-36 inches above a dining table. For higher ceilings, divide the vertical space into thirds and position the chandelier two-thirds of the distance from the floor, ensuring at least 7 feet of clearance from the floor in areas where people walk underneath.

2. Mount the Fixture

• Attach the mounting bracket to the junction box in the ceiling.
• Adjust the chain length as needed. The supplied chain is 6 feet long.
• Thread the electrical wires through the chain and canopy.

3. التوصيلات الكهربائية

• Connect the fixture's ground wire to the ground wire from the junction box.
• Connect the fixture's 'white or identified' wire (often with ridges) to the white (neutral) wire from the junction box.
• Connect the fixture's 'plain or black' wire to the black (hot) wire from the junction box.
• قم بتأمين جميع التوصيلات باستخدام صواميل الأسلاك والشريط الكهربائي.

4. التجميع النهائي

• قم بتأمين المظلة إلى السقف.
• Install 9 candelabra-shaped bulbs (E26 base, maximum 60 watts each). Note: Only candelabra-shaped bulbs can be used with the shades.
• Attach the off-white linen shades to each light socket.
• استعادة الطاقة عند قاطع الدائرة.

دليل التثبيت المرئي

فيديو: نظرة شاملةview of chandelier installation by Progress Lighting, demonstrating key steps and considerations for proper setup.

أبعاد المنتج

Image: Dimensional drawing of the chandelier, indicating a width of 29.38 inches and a height of 31 inches.

تعليمات التشغيل

Once properly installed, your chandelier can be operated using a standard wall switch. If your electrical setup includes a dimmer switch, ensure it is compatible with incandescent bulbs for optimal performance.

The fixture's switch type is listed as 'Pull Chain' in some specifications, however, the primary control is typically via a wall switch for chandeliers of this design. Please refer to your specific home wiring and switch setup.

صيانة

تنظيف

• احرص دائمًا على فصل التيار الكهربائي قبل التنظيف.
• امسح التركيبات بقطعة قماش ناعمة وجافة.
• لا تستخدم المنظفات الكاشطة أو المذيبات لأنها قد تتلف الطبقة النهائية.
• The linen shades can be gently dusted or spot cleaned with a damp القماش إذا لزم الأمر.

استبدال المصباح

• Ensure power is off and bulbs have cooled before replacing.
• Unscrew old bulbs and screw in new E26 candelabra-shaped bulbs.
• لا تتجاوز الحد الأقصى للواطtagهـ 60 واط لكل لمبة.

استكشاف الأخطاء وإصلاحها

If your chandelier is not functioning correctly, refer to the following common issues:

• لا يوجد ضوء: Check the circuit breaker, ensure bulbs are securely screwed in, and verify all electrical connections are tight.
• أضواء متقطعة: Ensure bulbs are fully tightened. If using a dimmer, confirm it is compatible with the bulb type and that the bulbs are dimmable.
• تركيب غير ثابت: Re-check mounting hardware and ensure it is securely fastened to the ceiling junction box.

إذا استمرت المشاكل، استشر كهربائيًا مؤهلًا.

تحديد

معلومات الضمان

This Progress Lighting product is covered by a ضمان محدود لمدة سنة واحدة. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support. Please retain your proof of purchase for warranty claims.

دعم العملاء

For further assistance, technical support, or warranty inquiries, please visit the official Progress Lighting website or contact their customer service department. Refer to the packaging or the Progress Lighting webالموقع للحصول على معلومات الاتصال الحالية.