دليل تعليمات بكرة جزازة العشب تورو 88037 الملفوفة مسبقًا

1. المقدمة

This manual provides essential instructions for the proper installation and use of the Toro 88037 Pre-Wound Trimmer Spool. This product is designed as a replacement line spool for specific Toro handheld trimmers, ensuring efficient and reliable operation.

2. انتهى المنتجview

The Toro 88037 is a pre-wound spool containing 12 feet of .050 inch diameter trimmer line. It is designed for quick and easy replacement in compatible Toro electric trimmers.

الشكل 1: قمة view of the Toro 88037 pre-wound trimmer spool. This image shows the black plastic spool with white trimmer line wound around it, and a black cap on top.

الشكل 2: قاع view of the Toro 88037 pre-wound trimmer spool. This image displays the underside of the black plastic spool, revealing the internal mechanism and the wound white trimmer line.

3. التوافق

This pre-wound spool is compatible with the following Toro trimmer models:

• 7" Cordless Trimmer
• Cordless 710 Trimmer
• Cordless Power Trimmer
• 8" Cut Home Duty Trimmer
• 910 ماكينة حلاقة

Always verify your trimmer's model number to ensure compatibility before installation.

4. تعليمات التثبيت

Follow these steps to replace the trimmer spool:

1. السلامة أولاً: Ensure the trimmer is unplugged or the battery is removed before beginning any maintenance or installation.
2. إزالة البكرة القديمة: Locate the spool cover on the trimmer head. Depending on your model, you may need to press tabs, twist, or unscrew the cover to remove it. Carefully remove the old spool and any remaining line.
3. تنظيف رأس ماكينة الحلاقة: Clear any debris, grass, or dirt from the trimmer head area.
4. تركيب بكرة جديدة: Take the new Toro 88037 pre-wound spool. Locate the line exit hole(s) on the trimmer head. Feed the end of the trimmer line from the new spool through the appropriate exit hole(s).
5. Secure Spool: Place the new spool into the trimmer head, ensuring it sits correctly and aligns with any guides or pins.
6. استبدال الغطاء: Reattach the spool cover, making sure it is securely fastened. Tug gently on the trimmer line to ensure it feeds smoothly.
7. امتحان: Reconnect power to the trimmer and briefly test its operation in a safe area.

Refer to your specific trimmer's owner's manual for detailed instructions and diagrams if needed.

5. نصائح التشغيل

Once the new spool is installed, operate your trimmer according to its original instructions. The .050 inch line is suitable for light to medium trimming tasks. Avoid hitting hard surfaces like concrete, rocks, or fences, as this can prematurely wear down the trimmer line.

6. الصيانة

The Toro 88037 spool is a consumable part. Replace it when the trimmer line is depleted. Store unused spools in a cool, dry place away from direct sunlight to maintain line integrity.

7. استكشاف الأخطاء وإصلاحها

• الخط لا يعمل: Ensure the spool is correctly seated and the line is not tangled. Check for debris in the line exit hole.
• Rapid Line Breakage: This can occur if the line is hitting hard objects, if the line is old and brittle (unlikely with a new spool), or if the trimmer head is damaged.
• Trimmer Not Starting After Spool Change: Double-check that the power source is connected and the spool cover is securely fastened.

8. المواصفات

9. معلومات السلامة

Always observe general safety precautions when operating power tools, including trimmers:

• ارتدِ معدات الوقاية الشخصية المناسبة، بما في ذلك واقيات العين، والسراويل الطويلة، والأحذية المتينة.
• Ensure bystanders are at a safe distance.
• Never operate a trimmer without its guard in place.
• Disconnect power before performing any maintenance or changing parts.
• أبقِ يديك وقدميك بعيداً عن خط القطع.

10. الضمان والدعم

For specific warranty information regarding your Toro product, please refer to the documentation included with your original trimmer purchase or visit the official Toro website. For technical support or further assistance, contact Toro customer service.

يمكنك العثور على مزيد من المعلومات وتفاصيل الاتصال على Toro Store on Amazon.