1. المقدمة
The Line 6 XD-V75/55 System Carry Case V70SC is a protective zippered case designed to safeguard your Line 6 XD-V75 or XD-V55 wireless microphone system. Constructed from sturdy EVA foam, this case provides secure storage for your receiver, microphone, and power supply. It features convenient access to the front and rear panels of the receiver and includes an antenna pass-through design, allowing the system to be operated while remaining securely housed within the case.
2. الميزات الرئيسية
- بناء متين: Made from robust EVA foam for enhanced protection against impacts and scratches.
- ملاءمة مخصصة: Specifically designed to accommodate Line 6 XD-V75 and XD-V55 wireless microphone systems, including receiver, microphone, and power supply.
- Operational Access: Allows for easy access to the receiver's front and rear panels.
- Antenna Pass-Through: Enables the receiver to be used without removal from the case, with dedicated openings for antennas.
- الإغلاق الآمن: Features reliable zippers to keep contents secure during transport.
- مقبض متكامل: لسهولة الحمل.
Figure 2.1: The Line 6 V70SC Carry Case in its closed state, showcasing its compact and protective design. The Line 6 logo is visible on the front.
3. Setup and Equipment Placement
Follow these steps to properly place your Line 6 XD-V75/55 system components into the V70SC carry case:
- افتح القضية: Unzip the main compartment of the carry case completely.
- أدخل جهاز الاستقبال: Carefully place your Line 6 XD-V75 or XD-V55 receiver into the designated custom-cut slot within the case. Ensure the front and rear panels align with the case's openings for access.
- موضع الميكروفون: Place your handheld microphone into its dedicated round slot.
- Store Power Supply and Cables: Utilize the available space, typically in a separate compartment or pocket, to store the power supply unit and any necessary cables.
- محاذاة الهوائي: If you intend to operate the system while in the case, guide the receiver's antennas through the provided pass-through openings.
- الإغلاق الآمن: Zip the case closed, ensuring all components are securely contained.
Figure 3.1: The Line 6 V70SC Carry Case with its main compartment open, revealing the interior layout designed to hold the wireless receiver, microphone, and accessories.
4. Operating with the Case
The V70SC case is designed for both transport and operation of your wireless system. To operate the Line 6 XD-V75/55 receiver while it remains in the case:
- Ensure the receiver is correctly seated with its antennas extended through the designated pass-through slots.
- Connect the power supply and audio output cables through the accessible rear panel openings.
- The front panel controls and display remain visible and accessible for monitoring and adjustments.
- For optimal wireless performance, ensure antennas are fully extended and unobstructed.
5. الصيانة والعناية
To ensure the longevity and continued protection offered by your V70SC carry case, follow these maintenance guidelines:
- تنظيف: امسحي الجزء الخارجي بقطعة قماش ناعمة.amp قطعة قماش. بالنسبة للأوساخ المستعصية، يمكن استخدام محلول صابون خفيف، ثم المسح بقطعة قماش نظيفة.amp القماش. تجنب المواد الكيميائية القاسية أو المنظفات الكاشطة.
- تجفيف: Allow the case to air dry completely before closing or storing equipment inside.
- تخزين: قم بتخزين العلبة في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى عندما لا تكون قيد الاستخدام.
- العناية بالسحاب: Periodically check zippers for smooth operation. If they become stiff, a small amount of zipper lubricant can be applied.
- تقتيش: Regularly inspect the case for any signs of wear, tear, or damage to the EVA foam or stitching.
6. استكشاف الأخطاء وإصلاحها
Most issues with a carry case are minor. Here are some common concerns and their solutions:
- Equipment Not Fitting: Ensure you are placing the correct Line 6 XD-V75/55 system components into the case. Verify that no cables or accessories are obstructing the fit.
- سحابات صلبة: Apply a small amount of zipper lubricant or a graphite pencil to the zipper teeth to improve movement.
- Antenna Obstruction: If experiencing signal issues while operating the receiver in the case, ensure the antennas are fully extended through the pass-through slots and are not bent or obstructed by other objects.
- Case Damage: If the EVA foam or fabric is significantly damaged, the protective capabilities of the case may be compromised. Consider replacing the case if structural integrity is affected.
7. المواصفات
| يصف | التفاصيل |
|---|---|
| اسم طراز المنتج | V70SC |
| رقم موديل الشركة المصنعة | 98-033-0020 |
| التوافق | Line 6 XD-V75 and XD-V55 Wireless Systems |
| مادة | Sturdy EVA Foam |
| الأبعاد (تقريبية) | 14 inches (36 cm) in height (as shown in image) |
Figure 7.1: The Line 6 V70SC Carry Case displaying its approximate height of 14 inches (36 cm).
8. معلومات السلامة
يرجى مراعاة إرشادات السلامة التالية:
- Do not expose the case to open flames or extreme heat sources.
- Avoid placing excessively heavy objects on top of the case, as this may deform the EVA foam or damage contents.
- Keep out of reach of small children to prevent choking hazards from small parts or entanglement with zippers.
- Ensure the case is fully zipped when carrying to prevent items from falling out.
