1. انتهى المنتجview
The Tetra Whisper Air Pump is designed to provide reliable and consistent airflow for aquariums ranging from 20 to 40 gallons. This pump features a patented dome shape, a suspended motor, and sound-dampening chambers to minimize operational noise. Its wide footprint and rubber feet further reduce vibration, ensuring stable and quiet performance. The air pump is essential for oxygenating aquarium water and promoting water movement, which contributes to a healthy environment for aquatic life.
Image 1: Tetra Whisper Air Pump (Model 77848) for 20-40 gallon aquariums.
Image 2: Key features of the Tetra Whisper Air Pump, highlighting its quiet operation and efficient design.
2. تعليمات الإعداد
Follow these steps to properly set up your Tetra Whisper Air Pump:
- فك مكونات الحزمة: Carefully remove the air pump and all accessories from the packaging. The package includes the air pump, a check valve, and a T-connector.
- Connect Air Tubing: Attach standard aquarium air tubing (not included) to the air outlet on the pump.
- تركيب صمام عدم الرجوع: Insert the check valve into the air tubing. The check valve prevents water from siphoning back into the air pump during a power outage, protecting the pump from water damage. Ensure the check valve is oriented correctly to allow airflow towards the aquarium.
- Connect Air Stone/Accessory: Attach the other end of the air tubing to an air stone, ornament, or other air-driven aquarium accessory (not included).
- الموقع: Position the air pump above the water level of your aquarium. If the pump must be placed below the water level, ensure the check valve is properly installed and functioning to prevent back-siphoning. The flexible rubber feet provide a stable platform and help absorb vibrations.
- توصيل الطاقة: Plug the air pump into a suitable electrical outlet.
Image 3: Included accessories: check valve and T-connector.
Image 4: The check valve is crucial for preventing water from entering the pump.
فيديو 1: أكثر منview of the Tetra Whisper Air Pump, demonstrating its components and basic setup.
3. تعليمات التشغيل
Once the air pump is properly set up and connected, it will begin operating immediately upon being plugged into a power outlet. The pump is designed for continuous operation to maintain consistent aeration in your aquarium.
- تشغيل/إيقاف التشغيل: The pump does not have an external on/off switch. To operate, plug it into a power source. To turn off, unplug the unit.
- تدفق الهواء: The pump provides a steady stream of air to your aquarium. The amount of bubbles produced will depend on the air stone or accessory used.
- مستوى الضوضاء: The Tetra Whisper Air Pump is engineered for quiet operation, typically producing less than 40 dB of sound. Placing the pump on a soft surface or hanging it can further reduce any audible vibration.
Image 5: The air pump is designed for quiet operation, typically below 40 dB.
4. الصيانة
Regular maintenance ensures the longevity and optimal performance of your air pump.
- التنظيف الخارجي: Periodically wipe the exterior of the pump with a damp cloth to remove dust and debris. Ensure the pump is unplugged before cleaning.
- فلتر الهواء: Check the air intake filter (if accessible) for blockages and clean or replace as needed. A clogged filter can reduce airflow and increase noise.
- فحص الحجاب الحاجز: Over time, the internal diaphragm may wear out, leading to reduced airflow or increased noise. If this occurs, the diaphragm may need to be replaced. Refer to the internal view image for component location.
- فحص الصمام: Inspect the check valve regularly to ensure it is not clogged and is allowing proper one-way airflow. Replace if damaged or blocked.
Image 6: Internal components of the air pump, including the diaphragm.
5. استكشاف الأخطاء وإصلاحها
If you encounter issues with your Tetra Whisper Air Pump, consult the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يوجد تدفق هواء | قوة أوtage; clogged air tubing/air stone; damaged diaphragm; check valve blockage. | Check power connection; clear tubing/air stone; inspect/replace diaphragm; check check valve for proper function. |
| تدفق هواء منخفض | Clogged air filter; kinked air tubing; worn diaphragm; pump too far below water level. | Clean/replace air filter; straighten tubing; replace diaphragm; ensure proper check valve installation if below water level. |
| الضوضاء المفرطة / الاهتزاز | Pump resting on a hard surface; internal component rubbing; worn diaphragm. | Place pump on a soft surface or hang it; inspect internal components for contact (refer to Video 2); replace diaphragm if worn. |
Video 2: Troubleshooting a noisy air pump by adjusting internal components.
Video 3: Demonstration of an air pump with no bubbles, indicating a potential airflow issue.
6. المواصفات
- اسم الموديل: 77848
- Tank Size Compatibility: 20 إلى 40 جالونًا
- لون: أسود
- مادة: بلاستيك
- وزن السلعة: 1 جنيه
- مصدر الطاقة: كهرباء سلكية
- قدرة تدفق الهواء: 1.3 لترًا في الدقيقة
- وضع التشغيل: اوتوماتيكي
- أبعاد المنتج (الطول × العرض × الارتفاع): 4.06 × 2.81 × 6.19 بوصة
- المكونات المتضمنة: Tetra Whisper Aquarium Air Pump, Check Valve, T-Connector
Image 7: The pump is designed for 20-40 gallon aquariums.
7. الضمان والدعم
This Tetra Whisper Air Pump comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the warranty information included in your product packaging or visit the official Tetra website. For additional support, troubleshooting assistance, or to inquire about replacement parts, please contact Tetra customer service.
