مقدمة
This manual provides essential instructions for the safe installation, operation, and maintenance of your Ideal Lux TRONCO PT1 H60 outdoor floor lamp. Please read this manual thoroughly before installation and retain it for future reference.
وصف المنتج: The TRONCO PT1 H60 is an outdoor pole bollard lamp featuring a varnished die-cast aluminum body and a Pyrex glass diffuser with internal aluminum elements. It is designed for use with an E27 LED or halogen bulb (not included).
معلومات السلامة
- تأكد من فصل مصدر الطاقة قبل التركيب أو الصيانة أو استبدال المصباح.
- يجب أن يتم إجراء التثبيت بواسطة كهربائي مؤهل وفقًا للوائح الأسلاك المحلية.
- لا تتجاوز الحد الأقصى للواطtage specified (max 1 x 60W E27).
- This product is designed for outdoor use. Ensure all connections are waterproofed appropriately.
- لا تغطيهamp مع مادة عازلة.
- في حالة تلف الكابل المرن الخارجي أو السلك الخاص بهذا المصباح، يجب استبداله حصريًا من قبل الشركة المصنعة أو وكيل الخدمة الخاص بها أو شخص مؤهل مماثل لتجنب المخاطر.
محتويات الحزمة
- TRONCO PT1 H60 Lamp تركيبات
- أدوات التثبيت (البراغي والمثبتات)
- دليل التعليمات (هذا المستند)
Note: Light bulb (E27) is not included and must be purchased separately.
الإعداد والتثبيت
- تحضير:
Before beginning installation, ensure the main power supply is switched off at the circuit breaker. Gather all necessary tools (screwdriver, wire strippers, drill, etc.).
- مكان التركيب:
Select a suitable outdoor location for the lamp. The base of the lamp should be mounted on a stable, level surface, such as concrete or a sturdy deck. Ensure adequate drainage if installing in soil.
Image: The Ideal Lux TRONCO PT1 H60 floor lamp, showing its black cylindrical body and clear glass diffuser. This image illustrates the overall appearance of the lamp قبل التثبيت.
- تركيب القاعدة:
ضع lamp base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes if necessary, then secure the lamp base using the provided mounting hardware. Ensure the base is firmly attached.
Image: Technical drawing showing the dimensions of the TRONCO PT1 H60 lamp. The height is 605mm and the diameter is 155mm. This diagram is crucial for planning the installation space.
- التوصيلات الكهربائية:
Route the electrical cable to the lamp's wiring compartment. Connect the live, neutral, and earth wires according to local electrical codes. Ensure all connections are secure and properly insulated, especially for outdoor use. Use appropriate waterproof connectors if required.
- تركيب المصابيح:
Unscrew the diffuser to access the lampholder. Carefully screw an E27 LED or halogen bulb (max 60W) into the lampholder. Do not overtighten. Replace the diffuser, ensuring it is securely fastened to maintain weather resistance.
- التحقق النهائي:
تحقق جيدًا من جميع التوصيلات وتأكد من أنamp is securely mounted. Restore power at the circuit breaker and test the lampوظائف.
تعليمات التشغيل
The Ideal Lux TRONCO PT1 H60 lamp operates by connecting it to a standard electrical supply. Once installed and powered, the lamp will illuminate when the connected switch is activated.
- تشغيل/إيقاف التشغيل: السيطرة على لamp using the external switch connected to its power supply.
- نوع المصباح: Use only E27 base bulbs. LED bulbs are recommended for energy efficiency and longer lifespan.
- واتtage: Do not exceed 60W for the E27 bulb.
صيانة
Regular maintenance ensures the longevity and optimal performance of your TRONCO PT1 H60 lamp.
- تنظيف:
Disconnect power before cleaning. Wipe the aluminum body with a soft, damp cloth. Clean the Pyrex glass diffuser with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- استبدال المصباح:
Ensure power is off. Unscrew the diffuser. Carefully remove the old E27 bulb and replace it with a new one (max 60W E27). Reattach the diffuser securely.
- تقتيش:
فحص دوري لamp for any signs of damage, loose connections, or wear on the wiring. If any damage is found, disconnect power and consult a qualified electrician for repair.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Lamp لا يضيء. |
|
|
| وميض الضوء. |
|
|
| Water inside diffuser. |
|
|
If problems persist after attempting these solutions, please contact a qualified electrician or Ideal Lux customer support.
تحديد
- نموذج: TRONCO PT1 H60 (004730)
- ماركة: لوكس مثالية
- يكتب: الطابق الخارجي L.amp / Pole Bollard
- مادة: Varnished Die-cast Aluminum body, Pyrex Glass diffuser
- لون: أسود
- أبعاد: Ø 155 mm x H 605 mm (Diameter 15.5 cm x Height 60.5 cm)
- وزن: حوالي 998 جرام
- Lampمالك: إي27
- ماكس واتtage: 1 x 60W (E27)
- حجم الإدخالtage: 100-240 فولت
- نوع المصباح: LED or Halogen (E27, not included)
الضمان والدعم
For warranty information and customer support, please refer to the official Ideal Lux webالموقع أو تواصل مع بائع التجزئة. احتفظ بإيصال الشراء كإثبات للشراء.
الشركة المصنعة: Ideal-lux
اتصال: Refer to Ideal Lux official channels for support.
