دليل تعليمات نظام القفل المغناطيسي من سيفتي فيرست (مفتاح واحد و8 أقفال)

1. المقدمة

The Safety 1st Magnetic Locking System is designed to help secure cabinets and drawers from curious children. This system provides a discreet and effective solution for childproofing your home, keeping potentially hazardous items out of reach. The locks are installed inside your cabinets and drawers, remaining invisible from the outside.

2. معلومات السلامة

WARNING: This product is intended to help reduce the risk of injury. It is not a substitute for adult supervision. Never leave children unattended.

N NO EVENT, REGARDLESS OF CAUSE, SHALL Safety 1st BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UNDER BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND WHETHER BASED ON THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

3. محتويات العبوة

Your Safety 1st Magnetic Locking System includes the following items:

• 8 x Magnetic Locks
• 1 x Magnetic Key

Image: All components of the Safety 1st Magnetic Locking System, showing the 8 individual locks, the magnetic key, and mounting screws.

4. المميزات

• Keep cabinets & drawers off limits: Provides peace of mind for parents while children are exploring in the home.
• Toddler tested. Proven stronger: Locks outperform the competition both in home and mechanical pull force lab testing.
• Invisible from the outside: Installs inside of your cabinets and drawers, concealed from children and guests.
• وضع الفتح: Option to keep the lock in "unlock mode" when you need more frequent access to your cabinets.

5. الإعداد والتثبيت

The Safety 1st Magnetic Locking System is designed for easy installation inside most cabinets and drawers. Follow these steps for proper setup:

1. تحضير السطح: Ensure the inside surfaces of your cabinet or drawer and the cabinet door/drawer front are clean and dry.
2. تحديد الموضع: Identify the optimal location for the lock and latch. The lock should be positioned so that the latch mechanism aligns with the cabinet frame when the door is closed. Ensure there is enough clearance for the latch to engage and disengage.
3. Use the Installation Cradle (if included): Some kits include an installation cradle or template to assist with precise placement. If available, follow its instructions to mark screw holes accurately.
4. حفر ثقوب تجريبية مسبقة: Using a small drill bit (e.g., 1/16 inch), carefully pre-drill pilot holes for the screws. This prevents wood splitting and ensures a secure fit. Do not drill too deep to avoid going through the cabinet material.
5. قم بتركيب القفل: Secure the main lock unit to the inside of the cabinet door or drawer front using the provided screws. Ensure it is aligned correctly.
6. Mount the Latch: Secure the latch mechanism to the cabinet frame or drawer interior, aligning it with the lock unit. Test the alignment by gently closing the door/drawer to ensure the lock and latch engage properly. Adjust as needed before fully tightening screws.
7. الشد النهائي: Once satisfied with the alignment, securely tighten all screws.

Image: A Safety 1st magnetic lock is shown installed inside a cabinet, demonstrating its discreet placement and how the magnetic key interacts with it from the outside.

فيديو التثبيت:

6. تعليمات التشغيل

Using your Safety 1st Magnetic Locking System is simple and intuitive:

1. القفل: When the cabinet or drawer is closed, the magnetic lock automatically engages, preventing it from being opened by children.
2. Unlocking with Magnetic Key: To open a locked cabinet or drawer, place the magnetic key on the outside surface of the cabinet/drawer, directly over the installed lock. The magnet will disengage the lock, allowing you to open the door/drawer. Remove the key once opened.
3. وضع فتح: For periods when childproofing is not needed (e.g., when children are not present, or for frequent access), you can set the lock to "unlock mode." This typically involves a small switch on the lock unit that keeps the latch disengaged. Refer to the specific lock unit for the exact mechanism.

Image: A magnetic key is used to unlock a cabinet, demonstrating the simple operation of the system.

فيديوهات التشغيل:

7. الصيانة

To ensure the longevity and proper function of your Safety 1st Magnetic Locking System:

• Regularly inspect the locks and latches for any signs of wear or damage.
• Clean the locks and surrounding areas with a damp cloth and mild soap. Avoid harsh chemicals that could damage the plastic.
• Ensure the magnetic key is stored in a safe, consistent location, out of reach of children, to prevent loss.

8. استكشاف الأخطاء وإصلاحها

If you encounter any issues with your magnetic locking system, consider the following:

• القفل لا يعمل: Check for proper alignment between the lock and the latch. Ensure no debris is obstructing the mechanism.
• Difficulty unlocking: Verify that the magnetic key is placed directly over the lock mechanism. Ensure the lock is not in "unlock mode."
• Loose installation: Re-tighten any loose screws. If the adhesive is failing, consider re-mounting with fresh adhesive or screws if applicable.

For persistent issues, please refer to the manufacturer's support resources.

9. المواصفات

10. الضمان والدعم

For information regarding product warranty, returns, or customer support, please refer to the official Safety 1st webيمكنك زيارة الموقع الإلكتروني أو الاتصال بخدمة العملاء مباشرةً. لا يتضمن هذا الدليل تفاصيل الضمان المحددة.